With the continuous development and progress of my country’s science and technology, my country’s demand for oil and gas resources has become greater and greater. In order to promote the development of my country’s economic construction and meet people’s normal lives, ground construction is an important link in the process of oilfield development and exploration to ensure production The key means of safety, especially the installation of pipeline construction equipment and the construction technology of gathering pipelines, play an important role.
Here is the content list:
l On the characteristics of the corporate piping system.
l About the characteristics of pipeline construction equipment welding.
l Analyze the causes and characteristics of common problems during welding of pipeline construction equipment.
On the characteristics of the corporate piping system.
Among all the equipment in power plant operation, pipelines are one of the most indispensable equipment, which are concentrated in EH oil pipelines, lubricating oil pipelines, jack shaft oil pipelines and boiler fuel oil pipelines. Such pipelines are generally ordinary 20 steel. Or 18-8 type stainless steel material, the related pipeline construction equipment has rich specifications and small pipe diameter.
The number of welds on the upper level of pipeline construction equipment is relatively large, and at the same time they are densely distributed; some pipeline welds are not easy to find and are relatively hidden, which often causes some problems during welding operations; especially stainless steel, which is high in chromium. Alloys and material types are unusual. Usually, when pipeline construction equipment is used, relatively large intergranular corrosion and hot cracking will occur, and the difficulty coefficient when completing welding work is relatively large.
About the characteristics of pipeline construction equipment welding.
Welding of pipeline construction equipment requires argon arc welding. For oil pipelines with a diameter of less than 60 mm or a thickness of 5 mm, the welding process for pipeline construction equipment can be full argon arc welding; if the diameter of the pipeline is greater than 60 mm If the thickness is greater than 5 mm, the relevant technicians need to change the welding process to argon arc welding bottom arc welding cover.
The key reason for this is that in stainless steel, the content of cr is already above 13%. A little carelessness will cause oxidation or excessive burning of the welding root. Therefore, when welding pipeline construction equipment, it is necessary to Argon filling or mixing of inert gas is carried out inside, so as to achieve the protective effect and ensure the welding construction quality of pipeline construction equipment.
Analyze the causes and characteristics of common problems during welding of pipeline construction equipment.
In recent years, some power plants have been shut down due to pipeline weld leaks or due to the quality of system welds. The existence of such phenomena will not only have a very bad impact on the overall operation, but also make the safety of the plant fall into threat situation.
In the construction of pipeline construction equipment welding engineering, there are two defects in welding, namely surface and internal defects. Surface problems can be discovered by the naked eye, but internal defects cannot be discovered in time by only relying on the senses. At this time, technicians and detection instruments are required to inspect pipeline construction equipment. Only through accurate inspection of the instrument can the problem be clearly known. Where is the root cause.
The welding quality of pipeline construction equipment will have a great impact on the operation of the unit. In other words, if the operation of the unit does not stop, it is probably because the pipeline construction equipment has welding quality problems.
Why do these problems occur in pipeline construction equipment? The reasons can be found from the following aspects:
l Because the pipeline construction equipment design unit only gave the system diagram but not the layout diagram, the construction personnel carried out the construction based on the site conditions and construction experience. The welding technicians did not know the location and quantity of the welding joints, so they could only make visual inspections or estimates based on their own experience. There will be a shortage in the number of weld inspections, which increases the probability of missing weld inspections;
l In the welding process of pipeline construction equipment, relevant technical personnel did not pay much attention to the particularity of the pipeline medium of the oil system, resulting in a low proportion of non-destructive inspections and potential safety hazards;
l When inspecting the welds of pipeline construction equipment, the relevant technicians usually only pay attention to the welds of the main parts and start the inspection, ignoring the inspection of other common welds, which may easily cause omissions;
l There are irregularities in the direction and layout of construction pipelines and brackets of pipeline construction equipment, and even stress and other reasons. As a result, the weld is not only the weakest part of the pipeline, but also the source of the first problem;
l Because the construction period of pipeline construction equipment is tight or there are requirements on the schedule, some who do not have welder skills or do not hold welder certificates will also temporarily serve as welding technicians. Such personnel who have not received professional welding training usually operate They are all conventional and ordinary welding skills. In the welding operation of pipeline construction equipment, there are problems such as insufficient sense of responsibility and low attention. At the same time, the quality of the plumber’s counterpart is not up to the standard and the awareness is relatively weak. Such problems will lead to pipeline construction equipment. There are quality problems and safety hazards in the weld joints.
Solution of container pipe spool fabric line refers to pipeline design, prefabrication management, pipeline cutting, pipeline groove processing, welding, logistics, anti-corrosion paint, pipeline flaw detection and other work in a fixed area.
What are the characteristics of the work of the solution of container pipe spool fabrication line?
What was the reason for choosing the solution of container pipe spool fabrication line?
What does the solution of container pipe spool fabrication line include?
In the solution of container pipe spool fabrication line, mainframes are stored in containers for easy transport from site to other sites. At the same time, containers protect the host from harsh environments. If the project site changes, the entire system can be easily transported to the new site, saving the user's investment. The convenient handling system saves a lot of handling time and greatly improves work efficiency. The scientifically designed handling system, each host PLC control system and mature WPS program make the whole system easy to operate and maintain. Qualified test weld results and efficient manufacturing efficiency make the system cost-effective.
1. The solution of container pipe spool fabrication line uses a high-efficiency pipe cutting band saw and a fixed radial pipe end beveling machine to cut and mechanically bevel the pipes according to the process.
2. The original mobile pipeline mechanical assembly workstation in China is used for welding seam assembly, and the pipe welding seam is assembled mechanically.
3. The cover welding adopts the advanced automatic welding pipe mobile station and the automatic pipe welding machine to realize the efficient automatic cover welding of the pipe string.
4. The logistics transportation adopts the light rail transportation system, the station frame and the tram railing system. Light rail transportation systems are used for mechanized logistics transportation over long distances. The station frame is used for transportation to realize short-distance logistics transportation between stations. The trolley railing system is used for internal and external logistics transportation of containers.
5. The production capacity of the solution of container pipe spool fabrication line project can reach 3000 inches/year, and the one-day production capacity can reach 1000 inches/day, which can meet the needs of large-scale projects of prefabricated process pipes.
Solution of container pipe spool fabrication line generally refers to some mechanical equipment for processing pipes, such as cutting machinery for pipes, beveling machines for processing grooves, and welding technology between pipes and pipes Some welding machines, as well as some auxiliary series of driving equipment, of course, some logistics conveying equipment, many pipeline prefabrication now also include some management software developed for the software development of some pipeline prefabrication equipment, you can see the virtual Three-dimensional images, intuitively see the renderings. Some field pipe prefabrication solutions provide convenience and solutions for many manufacturers' problems in processing places.
Based on the great client’s facility and the site space availability, Wincoo Engineering Co., Ltd WINCOO are able to design matched configurations on project schedule, quality, cost and productivity to guarantee production pace in accordance with project requirement
Hydraulic jack is an important machine for tank construction. The equipment is mainly used for inverted construction of vertical cylindrical steel tank (hydraulic lifting method) in petrochemical industry, inverted construction of steel liner in power plant chimney and inverted construction of vertical cylindrical low temperature tank. Next, we will introduce several types of hydraulic jack for you.
●Advanced hydraulic jack
●Simple unfixing Holding -latch hydraulic Jack
●Simple chain type hydraulic jack
T Series Hydraulic Tank lifting device is a large-scale equipment specially designed for the national oil reserve project developed suitable steel giant silo tank inversion welding process engineering.
Features: This type of device is a two-stage single-acting hydraulic cylinder (hydraulic jacks) for VTOL work force or return required from back position, it can not use for horizontal work. Structured compact device, Safe and stable, easy to operate, load adjustable, quick installation, high synchronization accuracy.YT Series Hydraulic Tank lifting device is "dragged five" Oil supply: Each pump station connected to the hydraulic cylinder 5; thus avoiding excessive tubing traditional centralized oil brings. Leakage points more than the disadvantages, to ensure that environmental pollution to a minimum.
Hydraulic lifting device (package unit) is evenly distributed around tank inner wall. Tank top and upper (the first layer) wall plates are lifted first and then install and weld wall plates of tank body. Self locking hydraulic jack and hydraulic hoist composing of lifting frame and lifting rod are adopted. When oil enters hydraulic jack, upper clamp fastens and lifts lifting rod and expansion ring and mobilize tank (including tank top) to ascend upward. When oil returns to jack, upper clamp returns with piston and lower clamp automatically fastens lifting rod without gliding. The jack repeats the movement and make lifting rod ascend with tank to designated height (spare height for next layer of plate). After butt weld of next layer of wall plates, open upper and lower loosening device and loosen upper and lower clamp to make lifting rod and expansion ring descend to lower expanded and welded rib plate of the next layer of wall plates and then lift. Repeat the process and ascend welded tan till the last layer of wall plates are installed and welded. The installation of the whole storage tank is completed.
chain type hydraulic jack is composed of one-stage double-acting hydraulic cylinder, pulley block, load-bearing chain and oil way etc. Moveable pulley is used to enlarge chain stroke, i.e. traveling distance of the cylinder is 1/2 of lifting distance of the chain. It applies to inverted installation and construction of various large tanks (steel) and various tanks.
1. Hydraulic lifting is stable, safe and reliable. Due to the adoption of unified hydraulic control and single or partial (several) adjustment, the whole lifting process is relatively stable. The hoist is provided with synchronizing valve and hydraulic lock to prevent sliding and falling of the tank or heavy loads, which are caused by power failure and fracture of oil tube. Hydraulic lifting is stable, safe and reliable.
2. Construction quality is ensured. As the hoist is provided with synchronizer and adjustable function, lifting height can be controlled accurately. Due to above reasons, quality of the tank is ensured.
3. The equipment is easy to operate. Construction environment is good and work efficiency is high.
4. The equipment is well-adapted. As long as the number of hydraulic hoists is increased or decreased, the whole set of equipment can be applied to the inverted hydraulic lifting construction of large storage tanks with different volumes ranging from several thousand cubic meters to tens of thousands cubic meters.
5. The hydraulic pump station and the hydraulic hoist are placed in the tank for easy operation. Finally, a door-closing plate is reserved to move the equipment out of the storage tank, and the door-closing plate is group welded well.
6. The hydraulic pump station can be controlled singly or jointly, and has strong construction adaptability and excellent technical performance price ratio.
7. Short construction period, low cost and good economic benefit. Due to the high degree of modernization and the fast lifting speed of the complete set of equipment, it has low construction cost and good economic benefit. This technology is truly characterized with convenient and centralized control, simple operation, safety and reliability (no falling), accurate control of weld clearance and lifting height of heavy objects, which can ensure the quality of the project, save labor and reduce costs, and achieve remarkable economic benefits.
These are the three types of hydraulic jacking system of our company. Our company Wincoo Engineering Co.,ltd is a hydraulic machinery manufacturing company integrated with design, development, production and sales, which mainly manufactures YT advanced hydraulic jack,LYT-type chain-type hydraulic hoist, SQD unfixing holding-latch hydraulic hoist and supporting products. Such products are mainly used for inverted lifting and installation of steel storage tanks. Founded in 2003, after years of concentrated scientific research and development, the company obtained the patent certificate of "Utility Model Hydraulic Hoist’ issued by "China National Intellectual Property Administration", and the right to use the trademark of "WINCOO" in 2008, so as to enable products of Wincoo Engineering Co.,ltd to quickly become Chinese brands.
The tank hydraulic jacking system is generally equipped with safety protection devices such as anti-falling, overloading, power failure, etc., rail-type external power unit, using hanging chains or cross bars at the entrance and exit of the table, guardrails and lifting platform operating warning lights or warning bells, when the door is opened Many functions such as a safety switch to close the circuit of the elevator platform. The tank hydraulic jacking system is extremely convenient and convenient for the operator to multi-point control of each working layer, jog or safe mode operation.
Here is the content list:
l Analysis on the application performance of the tank hydraulic jacking system.
l About the general layout of the tank hydraulic jacking system.
l The application environment analysis and prospect of the tank hydraulic jacking system.
The tank hydraulic jacking system product has a solid structure, large carrying capacity, stable lifting, simple and convenient installation and maintenance, and is an economical and practical low-floor replacement elevator ideal cargo conveying equipment. According to the installation environment and use requirements of the tank hydraulic jacking system, different fixed hydraulic jacks can be selected, and different optional configurations can be selected to complete the task of lifting objects and achieve better results.
If the tank hydraulic jacking system requires a large size, a fixed double-span hydraulic lift can be used. The double-span type has stable lifting, large carrying capacity and simple operation. It is widely used in vehicle maintenance, kilns, chemical plants, equipment supporting, etc. Industry use.
The tank hydraulic jacking system is suitable for installation and use under various environmental conditions indoors and outdoors. It can be installed in a closed hoistway or between open floors, in a concave foundation pit or on a flat ground according to usage requirements.
Due to the height of the building or work shelf, the size and weight of the objects carried by the tank hydraulic jacking system, and other requirements for use, there are many uncertain factors for its model. When the models shown in the list are not suitable for use requirements, the elevation, carrying capacity, platform area, etc. of the lifting platform can be combined according to the actual use environment and operating requirements to achieve the desired use effect.
Tank hydraulic jacking system is a kind of cargo lifting equipment with good lifting stability and wide applicability. It is mainly used for production line, automatic line transportation of goods with height difference on a certain section, material on-line and off-line, workpiece assembly and other lifting operations.
According to different working requirements and use environments, different tank hydraulic jacking system forms, power forms, control methods and other additional accessories can be configured. The tank hydraulic jacking system has a compact and stable structure and can adapt to high frequency continuous operation. The high stability of lifting can satisfy the stable lifting of large tonnage cargo. The tank hydraulic jacking system is equipped with a hydraulic system with anti-attachment and overload safety protection to ensure safe operation. Any configuration of rollers, balls, turntables, etc. can meet the requirements of different working conditions.
The oil tank hydraulic jacking system is a special hydraulic lifting platform for cargo transportation. It is mainly used for cargo transportation between various working layers such as warehouses, garages and workshops. Tank hydraulic jacking system has the advantages of wide applicability, large carrying capacity, safe and stable hoisting, and simple installation and maintenance. It is an economical and practical ideal cargo transportation equipment!