The tank hydraulic jacking system is generally equipped with safety protection devices such as anti-falling, overloading, power failure, etc., rail-type external power unit, using hanging chains or cross bars at the entrance and exit of the table, guardrails and lifting platform operating warning lights or warning bells, when the door is opened Many functions such as a safety switch to close the circuit of the elevator platform. The tank hydraulic jacking system is extremely convenient and convenient for the operator to multi-point control of each working layer, jog or safe mode operation.
Here is the content list:
l Analysis on the application performance of the tank hydraulic jacking system.
l About the general layout of the tank hydraulic jacking system.
l The application environment analysis and prospect of the tank hydraulic jacking system.
The tank hydraulic jacking system product has a solid structure, large carrying capacity, stable lifting, simple and convenient installation and maintenance, and is an economical and practical low-floor replacement elevator ideal cargo conveying equipment. According to the installation environment and use requirements of the tank hydraulic jacking system, different fixed hydraulic jacks can be selected, and different optional configurations can be selected to complete the task of lifting objects and achieve better results.
If the tank hydraulic jacking system requires a large size, a fixed double-span hydraulic lift can be used. The double-span type has stable lifting, large carrying capacity and simple operation. It is widely used in vehicle maintenance, kilns, chemical plants, equipment supporting, etc. Industry use.
The tank hydraulic jacking system is suitable for installation and use under various environmental conditions indoors and outdoors. It can be installed in a closed hoistway or between open floors, in a concave foundation pit or on a flat ground according to usage requirements.
Due to the height of the building or work shelf, the size and weight of the objects carried by the tank hydraulic jacking system, and other requirements for use, there are many uncertain factors for its model. When the models shown in the list are not suitable for use requirements, the elevation, carrying capacity, platform area, etc. of the lifting platform can be combined according to the actual use environment and operating requirements to achieve the desired use effect.
Tank hydraulic jacking system is a kind of cargo lifting equipment with good lifting stability and wide applicability. It is mainly used for production line, automatic line transportation of goods with height difference on a certain section, material on-line and off-line, workpiece assembly and other lifting operations.
According to different working requirements and use environments, different tank hydraulic jacking system forms, power forms, control methods and other additional accessories can be configured. The tank hydraulic jacking system has a compact and stable structure and can adapt to high frequency continuous operation. The high stability of lifting can satisfy the stable lifting of large tonnage cargo. The tank hydraulic jacking system is equipped with a hydraulic system with anti-attachment and overload safety protection to ensure safe operation. Any configuration of rollers, balls, turntables, etc. can meet the requirements of different working conditions.
The oil tank hydraulic jacking system is a special hydraulic lifting platform for cargo transportation. It is mainly used for cargo transportation between various working layers such as warehouses, garages and workshops. Tank hydraulic jacking system has the advantages of wide applicability, large carrying capacity, safe and stable hoisting, and simple installation and maintenance. It is an economical and practical ideal cargo transportation equipment!
The solution of container tube coil production line is to prepare the installation. It is less difficult to prefabricate, so try to make pipe sections that can be prefabricated on the floor, which can speed up construction progress and reduce construction difficulties.
What is the production capacity of the solution of container tube coil production line?
What kind of equipment do we need for the solution of container tube coil production line?
What is the installation process in the Solution of Container Pipe Spool production line?
Production capacity: 36.000 diameter inch/year
Applicable tube diameter: DN50-600
Applicable pipe length: 0-12m
Applicable tube weight: 0-12T
Bevel shape: U, V, Double-V
chamfer speed: ≦5min (DN200 SCH40)
Conveyor speed: 2-20m/min
Automatic welding rate: ≧60%
Production rate: 50%-80%
Design software: PDSOFT PSFMS
Management software: PDSOFT PSFMS
The Pipe Spool Fabrication Line consists of seven steps: blasting→cutting→chamfering→adjusting→welding→non-destructive testing→paint spraying.
1. Blasting machine
We need to know the size, weight, material and degree of cleanliness of the workpiece, then we can offer you the suitable machine.
2. Cutting machine
There are three types of cutting machines: band saw cutting machine, 5-axis CNC burning and plasma cutting and profiling machine, as well as cutting and chamfering in one.
We need to know the size, weight, material of the workpiece, then we can offer you the suitable machine.
①Bandsaw machine is cold cutting, suitable for carbon steel, stainless steel, there are four lines 2-24 '', 8-32 '', 12-48 '' and 24-60 ''. It's PLC control, with fixed length function.
②5AXIS CNC Burning and Plasma Cutting and Roll Forming Machine is hot cutting, suitable for carbon steel. It's also PLC control.
③Cutting and chamfering in one is cold cutting, and there are three lines: 2-16 '', 2-12 '' and 2-8 ''.
3. The groove shape of bevel facing machine is J, U, V, X etc. It is a PLC or CNC control. 48'', 24-48'' and 24-60''.
We need to know the size, weight, material of the workpiece, then we can offer you the suitable machine.
4. Fitting-up machine
5. Welding machine, the welding process is root pass→filling→capping, there are two kinds of welding machines: split type and cantilever type.
6. Non-destructive testing is NDT, there are three testing methods: RT, UT and X-Ray.
7. Paint spraying can be reached through the spray booth.
We need to know the size and shape of the workpiece, then we can offer you a suitable machine.
The installation sequence in the solution of container pipe spool production line is the process of installing the prefabricated pipe sections and pipe equipment (valves, flow meters, etc.) at the position coordinates indicated in the drawing. It is generally installed in connection with equipment or steel construction. As a rule, it is better to prefabricate and assemble: a group of three, a master, a welder and a mechanic, sometimes a crane is required. First, the prefabricated pipe piece is pulled to the position to be installed, and then begin welding and installing according to the direction, flow direction, size, coordinates and orientation specified in the drawing. After completion, the installation is completed, and then the mounting installation is carried out, the pressure test is deleted and the work can be delivered.
Wincoo Engineering Co., Ltd (WINCOO) has been focused on developing and producing solutions for the manufacture of container tube coils for several years, and is committed to providing perfect service to every customer around the world.
The plate rolling machine is designed to roll the flat plate into a circular arc and cylindrical shape, which is widely used in the container manufacturing industry. It is indispensable equipment for these companies.
Why does the rolling machine need to be sealed?
What is forbidden to workers when operating a rolling machine?
What is a hydraulic rolling machine?
The reliability and service life of the seals in the hydraulic system of sheet metal bending machine are important indicators to measure the quality of the hydraulic system.
In addition to gap seals, seals are used to keep the gap between two adjacent coupling surfaces below the minimum gap through which the liquid to be sealed can pass. The seals in the hydraulic system of sheet metal bending machine are usually contact seals. There are two types of self-sealing compression seals and self-sealing self-clamping seals, also known as lip seals. However, the factors influencing the performance of different seals in the hydraulic system of the sheet metal rolling machine are different, just as with the three-roller roller. In fact, the seal of the hood is still influenced by temperature, pressure and the existing medium.
During the measurement of the roundness of dimensions, the operator of the rolling machine is forbidden to stand on the rolled cylinder, and it is forbidden to stand on the workpiece to be machined. For some difficult-to-process workpieces, such as thicker or larger diameters, high hardness or strength of raw materials, etc., this should be done by a small number of operations simultaneously to achieve the desired effect. For some workpieces with smaller diameters, they should be rolled in the middle of the rollers for operation.
The main features of hydraulic plate rolling machine: the upper roller of the machine can be lifted vertically, and the hydraulic transmission of vertical lifting is achieved by the action of the hydraulic oil in the hydraulic cylinder on the piston rod; The torque is provided, and there are tensioners under the lower roller that can be adjusted. The upper roller has the shape of a drum, which improves the straightness of the product and is suitable for tanks with various cross-sectional shapes with ultra-long specifications.
Hydraulic rolling machines can roll metal plates into circles, arcs and conical workpieces within a certain range. The two lower rollers of this model are active rollers and the upper rollers driven rollers. It is widely used in shipbuilding, boiler, aerospace, hydropower, chemical, metal structure and mechanical engineering industries.
The hydraulic rolling machine is suitable for bending metal plates. It can roll circular, arc and conical workpieces within a certain range and has the function of pre-bending the end of the plate. The two lower roles of this model are active roles. Horizontal movement, the upper roller is a driven roller and can move up and down. There are mechanical and hydraulic movements. The driveshafts are connected by cardan couplings.
To meet these growing demands, WINCOO ENGINEERING CO., LTD has various rolling machines, all of which are more effective, reliable and consistent.
The installation of pipeline construction equipment is one of the necessary steps in the industrial field, and the installation and construction of pipelines is a very important stage in project construction. Next, take an example to analyze the operating requirements of pipeline construction equipment.
Here is the content list:
l Introduction of welding engineering vehicles in pipeline construction equipment.
l Introduction of pipelayer in pipeline construction equipment.
l How to maintain pipeline construction equipment after construction?
Mainly introduce the operating requirements of pipe layers, welding engineering vehicles, counter pointers and directional drills that are frequently used and risky during the construction of pipeline construction equipment
Engine part, chassis running part, transfer case and universal joint shaft, generator, hydraulic boom crane, electrical control cabinet, lubrication system and cooling system.
Driving with a license, before entering the work of pipeline construction equipment, you should fully understand the special conditions of the work site, understand the various conditions that affect operation and sports, and adopt and formulate operation and protection measures that comply with safety regulations.
1. Keep a safe distance from hanging objects, walls, falling objects and unstable ground.
2. lt is necessary to understand the changes, visibility and weather conditions of the construction area of pipeline construction equipment. No smoking!
3. Contact relevant departments in time to learn more about the locations of public pipelines, underground cables, and water pipelines.
4. When the welder is working, put the throttle to the highest position and check that the various instrument indexes are normal before it can work.
5. Keep an adequate safety distance from wires and other pipeline construction equipment.
6. Avoid any work movement that can tilt or tip the welding truck; prevent the welding truck from working or moving on a slope that does not meet the requirements.
7. When pipeline construction equipment goes downhill, low speed must be used to prevent loss of control.
8. Electricity should follow the corresponding electrical regulations.
9. Welding vehicles are not allowed to work with faults. If there is no oil pressure, or the oil pressure is too low, the water temperature is too high, or there is abnormal noise, it should be stopped immediately for inspection and troubleshooting
10. The lifting weight of the hydraulic crane must comply with the requirements specified in the chart of the rated lifting weight curve of the hydraulic crane
11. It is not allowed to adjust the opening pressure of the safety valve of the hydraulic system at will
12. Driving is not allowed for 2 consecutive hours
13. Before using power generation pipeline construction equipment, observe the hydraulic crane and the surrounding environment, whether there are debris and tools on the crawler
14. When leaving the machine, the operating lever should be locked first!
Engine, crawler walking part, hoisting system, cab, counterweight, etc.
1. Before the pipe layer runs, the passageway must be cleared to facilitate traffic.
2. When the pipe layer hoisting heavy objects, it is strictly forbidden to pass above the equipment and personnel, and it is strictly prohibited to stand under the boom.
3. Stop immediately in case of emergency during work operation.
4. The command of the ground commander shall be serious and accurate, and shall not leave the work post without authorization.
5. When hoisting pipes while driving, pay attention to the side of the boom and the side of the counterweight to prevent the counterweight from reaching out and hitting obstacles.
6. When loading and unloading heavy objects, the speed should be even and stable, and should be handled gently when approaching the ground.
7. The center of the hook should be as close as possible to the center of the heavy object. The hoisting rope must be firm and reliable with sufficient bearing capacity, and the binding must be firm. Keep heavy objects as low as possible.
8. Heavy objects are not allowed to turn before leaving the ground. It is forbidden to pull heavy objects from the ground to pull up trees and lift objects buried in the ground (except when multiple pipe layers are laying pipes).
9. When walking with heavy objects hanging, the speed of forward and backward or turning should be stable.
The maintenance of pipeline construction equipment ensures that its technical parameters within the specified life cycle meet the original design requirements; ensure that its safety performance meets the requirements of regulations and standards.
Daily maintenance work such as cleaning, inspection, lubrication, tightening and adjustment to prevent deterioration of pipeline construction equipment and maintain equipment performance; necessary inspections to determine the degree of pipeline construction equipment deterioration or performance degradation; to repair deterioration and restore pipeline Repair activities based on the performance of pipeline construction equipment. Requirements for operators of professional pipeline construction equipment: “Three Goods” and “Four Meetings” should be achieved.
Good management, good use, good maintenance, can operate, maintain, inspect, and simply repair Equipment maintenance: cross operation method. Cleaning, lubrication, tightening, adjustment, and anti-corrosion pipeline construction equipment maintenance: general requirements for "five fixed" fixed-point, fixed-point, fixed-time, fixed-quality, and quantitative maintenance
① Strictly follow the procedures, cycles and methods specified in the pipeline construction equipment manual.
② Different functional blocks have different requirements: power system, transmission system, electrical system, hydraulic system, lubrication system, etc.