Oil Tank jack- China Factory Suppliers Manufacturers

We are halfway through 2022, and we sold nearly 200 hydraulic lifting machine in the first half of the year, so we are looking forward to the sales expectations of hydraulic lifting machine in the second half of the year.

Projects already under discussion

Regular customers from the past

New customers via online platforms such as Google Stand alone

Projects already under discussion

The largest hydraulic lifting machine project we are talking about is 40 hydraulic lifting machine and 10 tank welders that the salesman is talking about. After the unremitting efforts of colleagues and the support of technical staff, the customer has placed an order to us, the hydraulic lifting machine is in an orderly production.

Regular customers from the past

According to our past experience, our old customers will place orders with us again. Because most of our customers are professional tank contractors, each year will undertake a considerable number of tank construction projects. Hydraulic lifting machine is an inevitable machine used in tank construction, in order to save labor costs and protect the safety of staff. We promise to serve our customers with our best attitude and product quality. What we do most is always repeat business

New customers via online platforms such as Google Stand alone

Due to objective reasons such as the epidemic situation, we cannot visit customers abroad as we did before, and customers cannot conveniently visit factories in China. Therefore, we have developed more ways to develop and contact customers, such as Google Independent website, Alibaba International website, Made in China and other online platforms, so that customers around the world can see and understand our products online anytime and anywhere. Through these channels, we have come into contact with many new customers. I believe that customers will see and trust us through our professional ability and quality products.

WINCOO ENGINEERING CO., LTD has ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour costs and higher efficiency construction/fabrication method and better quality during phase of project bidding.

Do you know the tank hydraulic jacking system?Understand it?Do you know how it jacked up the tank?And do you know how much weight it can lift? Although hydraulic jacking system have been widely used in the construction of large tanks, many people still know little about them. Today I will give you a good introduction to the hydraulic jacking system from the following aspects.

●What is the hydraulic jacking system?

●How does the hydraulic jacking system lift the tank?

●How much weight can the hydraulic jacking system lift?

What is the hydraulic jacking system?

Hydraulic jacking system is an important machine for tank construction. The equipment is mainly used for inverted construction of vertical cylindrical steel tank (hydraulic lifting method) in petrochemical industry, inverted construction of steel liner in power plant chimney and inverted construction of vertical cylindrical low temperature tank.

At present, we have three types of hydraulic jacking system in WINCOO Engineering Co., LTD. They are the following three: Advanced hydraulic jacking system, Simple unfixing Holding -latch hydraulic Jacking system and Simple chain type hydraulic jacking system.

How does the hydraulic jacking system lift the tank?

Hydraulic jacking system (package unit) is evenly distributed around tank inner wall. Tank top and upper (the first layer) wall plates are lifted first and then install and weld wall plates of tank body. Self locking hydraulic jacking system and hydraulic hoist composing of lifting frame and lifting rod are adopted. When oil enters hydraulic jacking system, upper clamp fastens and lifts lifting rod and expansion ring and mobilize tank (including tank top) to ascend upward. When oil returns to jack, upper clamp returns with piston and lower clamp automatically fastens lifting rod without gliding. The jack repeats the movement and make lifting rod ascend with tank to designated height (spare height for next layer of plate). After butt weld of next layer of wall plates, open upper and lower loosening device and loosen upper and lower clamp to make lifting rod and expansion ring descend to lower expanded and welded rib plate of the next layer of wall plates and then lift. Repeat the process and ascend welded tan till the last layer of wall plates are installed and welded. The installation of the whole storage tank is completed.

How much weight can the hydraulic jacking system lift?

1.The number of hydraulic cylinders used for the same size tank is different according to the actual use and weight of the tank.

2.Regardless of tank size, hydraulic cylinder installation must be evenly distributed.

3.Construction of different tanks and selection of YT series hydraulic lifting equipment number and calculation of lifting equipment load rate specification: lifting equipment load rate must be less than 80%.

For example, for a storage tank with a volume of 50,00m3 and a diameter of 60m, the maximum weight of the lifting body of the tank is 536T (excluding the weight of the bottom plate of the tank), 40 hydraulic cylinders of YT25-2700 are selected, and the output force of each hydraulic cylinder is 250KN, so the total output force of the lifting device is 25O×40=10000KN.The load rate of the lifting equipment is 536x9.8÷10000×100%≈52.53%, which meets the requirement of less than 70%.

The above is our brief introduction to the hydraulic jacking system. If you have any questions, you are welcome to browse other relevant articles and products on our website. I hope the above content will be helpful to you.

Edge milling machine is a kind of high speed milling cutter working principle, It is a welding auxiliary equipment for opening weld groove of steel plate before welding.Widely used in boiler, pressure vessel manufacturing industry, shipbuilding, electric power, petroleum, chemical machinery, engineering machinery manufacturing, can process all kinds of medium and low carbon steel plate, stainless steel plate and aluminum plate before welding bevel, straight edge, U bevel, etc.

●Application of edge milling machine

●Compared with the traditional edge milling machine

●The characteristics of the milling machine

Application of edge milling machine

Edge milling machine is widely used in boiler, pressure vessel manufacturing industry, shipbuilding, electric power, petroleum, chemical machinery, engineering machinery manufacturing, for all kinds of low carbon steel plate, stainless steel plate and aluminum plate before welding groove processing, bevel, straight edge, U-shaped groove can be a milling molding, compared with the edge planer,It has the advantages of low price, low energy consumption, high efficiency, high finish, easy operation and maintenance, etc.

Compared with the traditional edge milling machine

In new edge milling machine can tear open outfit, and through heat treatment, the bed structure is reasonable, the milling head is more stable and reliable operation, the feed system and return completely independent, fast return, high efficiency, convenient adjustment of the Angle of the milling cutter and custom knife plate and standard knife dish interchangeable, it is the upgrading of the traditional edge milling machine.

The characteristics of the milling machine

As an alternative product of planer, edge milling machine has the advantages of high efficiency, high precision and low energy consumption.It is especially suitable for the groove processing of various shapes of carbon steel plate.Generally 6-80mm thickness, 0-60 degrees of arbitrary adjustment.

Performance of self-propelled edge milling machine:

1, Unique driving walking function

2, Special device stable processing accuracy

3, Special cutting all kinds of metal materials

4, Advanced cutting tools and long-term supply of different blades

The above is a brief introduction of our Wincoo edge milling machine, more models and parameters of the milling machine can be clicked into our website.

Pipe Spool Fabrication Line have seven steps:blasting→cutting→beveling→fitting-up→welding→non destructive testing→paint spraying.

1.Blasting machine

We need know the size,the weight,the material and clean level of the workpiece.Then we can offer suitable machine to you.

2. Cutting machine

  There are three types of cutting machine,are Band saw cutting machine,5Axis CNC flame and plasma cutting and profiling machine and Cutting and beveling all in one.

We need know the size,the weight,the material of the workpiece.Then we can offer suitable machine to you.

  ①Band saw machine is cold cutting, suitable for carbon steel, stainless steel,there are four lines are 2-24'',8-32'',12-48'' and 24-60''.It’s PLC control,with fixed length function.

②5Axis CNC flame and plasma cutting and profiling machine is hot cutting,suitable for carbon steel.It’s also PLC control.

③Cutting and beveling all in one is cold cutting,and there are three lines are 2-16'',2-12'' and 2-8''.

3.Beveling/Facing machine groove shape are J,U,V,X and so on.It’s PLC or CNC control.Suitable workpiece dimensions are 2-16'',4-24'',8-32'',12-48'',24-48'' and 24-60''.

We need know the size,the weight,the material of the workpiece.Then we can offer suitable machine to you.

4.Fitting-up machine

5.Welding machine,the welding procedure is Root pass→Filling→Capping,there are two types of welding machine: split type and cantilever type.

6.Non destructive testing is NDT,it has three methods of testing:RT,UT and X Ray.

7.Paint spraying is through the Spray booth to achieve.

We need know the size and shape of the workpiece,then we can offer suitable machine for you.