Welding Rotator for Pipe- China Manufacturers Suppliers Factory

The advantages of hydraulic storage tank lifting equipment are the main ones. With the continuous improvement of design, manufacture and use level, some disadvantages are gradually being overcome. hydraulic storage tank lifting equipment has broad prospects for development.

What are the structural advantages of hydraulic storage tank lifting equipment?

What are the advantages of using hydraulic storage tank lifting equipment?

What are the precautions for installation of hydraulic storage tank lifting equipment?

What are the structural advantages of hydraulic storage tank lifting equipment?

Since the hydraulic storage tank lifting equipment is connected by oil pipes, the transmission mechanism can be conveniently and flexibly arranged by the connection of oil pipes, which is superior to mechanical transmission. For example, a pump that extracts oil downhole can be driven by a hydraulic drive to overcome the inefficiency of long drive shafts. Due to the large thrust of the hydraulic cylinder and its easy arrangement, it has basically replaced the old-fashioned mechanical transmission in heavy construction machinery such as excavators, which is not only easy to operate, but also beautiful in appearance.

What are the advantages of using hydraulic storage tank lifting equipment?

1. The hydraulic storage tank lifting equipment can realize stepless speed regulation in a wide range. With the help of valve or variable pump and variable motor, stepless speed regulation can be achieved, the speed regulation range can reach 1:2000, and the speed can be adjusted during the operation of the hydraulic device.

2. hydraulic storage tank lifting equipment, the thought transmission movement is uniform and stable, and the speed is relatively stable when the load changes. Because of this feature, almost all of the grinder drives in metal cutting machine tools now use hydraulic drives.

3. hydraulic storage tank lifting equipment is easy to achieve overload protection - by means of setting overflow valves, etc., and the hydraulic parts can be self-lubricated, so the service life is long.

4. hydraulic storage tank lifting equipment is easy to realize automation - with the help of various control valves, especially when hydraulic control and electrical control are used in combination, complex automatic work cycles can be easily realized, and remote control can be realized.

What are the precautions for installation of hydraulic storage tank lifting equipment?

The central axis of the hydraulic storage tank lifting equipment should be concentric with the central line of the load force to avoid side force caused by the jacking operation, which may easily cause the seals to wear and the piston to be damaged. For hydraulic jacks for moving objects, keep the oil cylinder parallel to the moving object in the direction of movement during installation, otherwise the cooperation between the hydraulic jack and the moving object will be unreliable.

WINCOO ENGINEERING CO., LTD has ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour costs and higher efficiency construction/fabrication method and better quality during phase of project bidding.

Gantry welding machine is mainly used for submerged arc welding of H-beam, with high degree of welding automation, simple and convenient operation; the welding head has functions such as vertical lift and angle adjustment. In order to meet the needs of different welding workpieces, the flux is fed by gravity and recovered by a negative pressure vacuum machine; the two welding heads can be welded simultaneously or individually.

What are the structural characteristics of gantry welding machine?

What are the product feathers of gantry welding machine?

What are the advantages of gantry welding machine?

What are the structural characteristics of gantry welding machine?

Gantry welding machines are used for assembly, welding and straightening of H-beams or T-beams. Concentrate assembly, welding, straightening functions on one machine, saving space and saving workshop. Reduced Workflow: Reduce production time and increase efficiency. Save investment in crane equipment and operators.

These gantry welding machines are specially designed for the manufacture of welded "T" and double "T" beams, therefore with parallel or converging flanges. They can be welded on items whose webs are placed vertically without any positioning. Positioning only needs to be at the top to get the proper angle between the web and flange. When making a double "T" beam, once the first flange is welded, the beam flips and feeds back into the element again. Effectively save working time

In addition, the gantry welding machine is capable of welding both symmetrical and asymmetrical beams without the need for positioning; a post-flange deformation device installed at the exit of the machine enables the machine to compensate for any flange deformation that occurs during welding. The unit is easily adjustable to handle a wide range of flange sizes and various deformable thicknesses up to a width of 40mm. The welding line can be equipped with Mitsubishi control PLC.

What are the product feathers of gantry welding machine?

Product features:

1. Beam Welding Line" automatic, two heads submerged arc-welding lines for T / I girder beam;

2. Two sets of American Lincon DC-1000, NA-3S SAW welding system to ensure good welding quality;

3. Japan Mitsubishi PLC controller;

4. Hydraulic type post deformation device to straighten the beam;

5. The beam is fed into the machine and both sides of the beam are welded simultaneously;

6. Save space and economize workshop; shorten the production time and improve the efficiency;

7. Economize the investment of crane equipment and operator.

What are the advantages of gantry welding machine?

Gantry welding machine can dynamically track the welding seam, realize bidirectional reciprocating welding, ensure the welding seam quality and improve production efficiency.

The automatic flux feeding and recycling device of gantry welding machine can reduce flux loss, reduce labor intensity of workers and improve production efficiency.

The welding power source and the main engine of gantry welding machine are controlled centrally, and the linkage operation is simple and convenient.

The welding travel motor of gantry welding machine adopts AC frequency conversion speed regulation, which can realize stepless adjustment.

The welding process of gantry welding machine can be single wire single arc, double wire single arc or double wire double arc according to the requirements.

To support project execution, we are always ready to work as firemen to give prompt supply on project materials from different consumables, tools, equipment/machines to special merchandise. With flexibility, WINCOO ENGINEERING CO., LTD is also glad to perform as procurement agent in China to seek required supply resources.

In the near future, rail trains will make people's travel more convenient, safe and efficient, and the welding technology of orbital welding machine will be more closely applied in the rail train manufacturing industry.

• What is the process of using the orbital welding machine?

• What are the features of the orbital welding machine?

• What is the using principle of the orbital welding machine?

What is the process of using the orbital welding machine?

(1) Preparation of welding parts: Considering the high hardness of the rail steel, it is difficult to process the groove on site. Therefore, the orbital welding machine adopts the docking method and uses the existing end face of the rail as the operation surface. If the end face is seriously corroded, it is necessary to use the angle Grinding can polish the surface brightly.

(2) Determining the butt gap: Considering the height of the rail itself, the gap cannot be too small, otherwise the welding rod cannot be penetrated into it for welding operations, so it is necessary to reserve enough gap.

(3) Weldment preheating: In the preheating process of orbital welding machine, a gas welding torch is used for preheating, and an infrared temperature measuring gun is used to ensure that the preheating reaches the specified temperature.

(4) Butt surfacing process: The whole welding process adopts the welding method of multi-layer multi-pass welding. Although this method is relatively inefficient, it can ensure the welding strength and the temperature between layers.

(5) Post-weld heat treatment: Orbital welding machine heating method uses gas welding torch. After heating to the specified temperature, asbestos felt is used for heat preservation to prevent cracks from appearing after welding.

(6) Grinding of workpiece after welding: Orbital welding machine keeps the weld and rail base metal smooth.

What are the features of the orbital welding machine?

The biggest feature of orbital welding machine is local small-scale heating, high heating efficiency, easy to use, very suitable for rapid heating and cooling of high manganese steel welding, and also suitable for welding repair of local defects of rails. It is currently the most widely used in rail and rut welding repair methods. But it must be noted that the orbital welding machine must be properly preheated for rail welding. Because of the local heating and rapid cooling of the rail, it is easy to produce abnormal brittle structures such as martensite and bainite, which increases the brittleness of the rail. Preheating prevents abnormal tissue formation.

What is the using principle of the orbital welding machine?

Using pipe fixed, welding carriage walking to reach all position automatic pipe welding, welding process with high efficiency and low cost of CO2 gas shielded welding. Pipeline all position automatic welding machine consists of welding control system, welding carriage with torch, welding power source, wire feeding device and accessories.

Wincoo Engineering Co., Ltd has worked on the production of orbital welding machines for over ten years. You can find the best orbital welding machine in this company.

Tank hydraulic jacking system is mainly a closed or meshed hoistway enclosed by buildings or light steel structures and hydraulically driven cylinders to lift the platform.

Here is the content list:

l What are the components of installing a tank hydraulic jacking system?

l What are the performance characteristics of installing tank hydraulic jacking system?

l How to install tank hydraulic jacking system?

What are the components of installing a tank hydraulic jacking system?

Tank hydraulic jacking system is mainly a closed or meshed hoistway enclosed by buildings or light steel structures and hydraulically driven cylinders to lift the platform. Its main components are:

1. Hoistway part: a closed or net-like frame enclosed by a building or light steel structure, with steel guide rails installed on both sides of the inside

2. Driving part: a small oil tank hydraulic jacking system with hydraulic components such as hydraulic driving motor, oil pump, safety valve, speed control valve and reversing valve

3. Oil cylinder part: it is composed of one or more tank hydraulic jacking system of the lifting oil cylinder straight-top platform or jacking scissor frame

4. Door system: It is a closed or net-shaped platform door or landing door system composed of steel structure. There are manual doors and automatic doors. Generally, open platforms do not have doors.

5. Electrical part: it is composed of power, control, signal, safety and lighting devices

6. Platform part: It is a steel structure platform that carries heavy objects. It has a closed type (ie car type) or an open type. Both sides are equipped with guide rollers or guide shoes. The bottom of the platform can be connected with a lifting cylinder or a lifting scissors steel frame

7. Auxiliary part: it is composed of hydraulic pipe fittings, pipelines, pressure gauges and steel structure base

8. Safety device: safety valve, limit limit, door electromechanical interlock, rupture valve, emergency switch and electrical short circuit protection, etc.

What are the performance characteristics of installing tank hydraulic jacking system?

The tank hydraulic jacking system is generally equipped with safety protection devices such as anti-falling, overloading, power failure, etc., rail-type external power unit, using hanging chains or cross bars at the entrance and exit of the table, guardrails and lifting platform operating warning lights or warning bells, when the door is opened Many functions such as a safety switch to close the circuit of the elevator platform. It is extremely convenient and convenient for the operator to control multiple points in each working layer, and operate in jog or safe mode.

The large carrying capacity, stable lifting, simple and convenient installation and maintenance, and it is an economical and practical low-floor elevator to replace the ideal cargo conveying equipment. According to the installation environment and use requirements of the tank hydraulic jacking system, different fixed hydraulic jacks can be selected, and different optional configurations can be selected to complete the task of lifting objects and achieve better results.

If the tank hydraulic jacking system requires a large size, a fixed double-span hydraulic lift can be used. The double-span type has stable lifting, large carrying capacity and simple operation. It is widely used in vehicle maintenance, kilns, chemical plants, equipment supporting, etc. Industry use.

How to install tank hydraulic jacking system?

The tank hydraulic jacking system is suitable for installation and use under various environmental conditions indoors and outdoors. The tank hydraulic jacking system can be installed in a closed hoistway or between open floors, in a concave foundation pit or on a flat ground according to the requirements of use.

Due to the height of the building or work shelf, the size and weight of the objects carried, and other usage requirements, there are many uncertain factors in the tank hydraulic jacking system model. When the models shown in the list are not suitable for use requirements, the elevation, carrying capacity, platform area, etc. of the lifting platform can be combined according to the actual use environment and operating requirements to achieve the desired use effect.

What is more? WINCOO also provide customers with vairous pipeline construction solutions!