Simple chain type hydraulic jacking system is composed of one-stage double-acting hydraulic cylinder, pulley block, load-bearing chain and oil way etc. Moveable pulley is used to enlarge chain stroke, i.e. traveling distance of the cylinder is 1/2 of lifting distance of the chain. It applies to inverted installation and construction of various large storage tanks (steel) and various storage tanks.
LYT-type simple chain type hydraulic jacking system includes the following models: LYT-120-2700, LYT-200-2700, and LYT-300-2700 etc. (those with special stroke need to be customized).
What is the operation process of the simple chain type hydraulic jacking system?
What is the working principle of the simple chain type hydraulic jacking system?
What are the advantages of simple chain type hydraulic jacking system?
LYT-type simple chain type hydraulic jacking system is used to firstly lift the tank roof and the top (first layer) siding of the tank. It's required to group weld tank siding when the lifting height of siding exceeds the second siding (the second layer from the top) by 30-50mm, and group weld the third layer (the third layer from the top to the bottom) of the tank after lifting again, lift successively, group weld the siding of the tank layer by layer, until the last layer of siding.
LYT-type simple chain type hydraulic jacking system is used for lifting. When oil enters the hydraulic jack, the movable pulley is pushed upward by pressing the piston, thus driving the load-bearing chain to lift the expansion ring. In this way, the whole tank (including tank roof) is lifted up, until it reaches the pre-set height (there is a voidance of the next layer of plate). The siding in this layer is surrounded for butt welding. After the positioning block is welded, hydraulic hoist returns and the lift tank falls back to the newly-surrounded siding. After welding of circular seam and vertical seam, the door-type card for fixing expansion ring is cut off and the expansion ring is released. In this way, the hoist returns and expansion ring falls to the Model of hydraulic pump station Tank volume Rated pressure Rated flow Power Control voltage of solenoid valve Motor drive rate YB-7.2 220L (700*550*580) 25Mpa 7.2L/min Three-phase Four-wire (380V) 220V 5.5KW YB-14.5 340L (750*650*650) 25Mpa 14.5L/min 220V 7.5KW Mode of LYT-type hoist Rated lifting capacity (KN) Hydraulic area (mm) Rated oil pressure (MPa) Piston stroke (mm) Chain stroke (mm) Cylinder safety equipment Reinforcement measures LYT-120-2700 120 11304 25 1500 2700 Double-direction oil-way hydraulic lock 2 adjustable pull rods LYT-200-2700 200 18859.6 25 1500 2700 Double-direction oil-way hydraulic lock 2 adjustable pull rods LYT-300-2700 300 25434 25 1500 2700 Double-direction oil-way hydraulic lock 2 adjustable pull rods bottom of tank siding. Then, the next circular plate is expanded and transfer rib plate, such as door-type card, is welded for lifting, and so forth. The group welded tank is lift, until group weld of the last layer of siding, so that the whole storage tank is installed with this inverted method.
1. Simple chain type hydraulic jacking system is stable, safe and reliable. Due to the adoption of unified hydraulic control and single or partial (several) adjustment, the whole lifting process is relatively stable. The hoist is provided with synchronizing valve and hydraulic lock to prevent sliding and falling of the tank or heavy loads, which are caused by power failure and fracture of oil tube. Hydraulic lifting is stable, safe and reliable.
2. Construction quality is ensured. As the hoist is provided with synchronizer and adjustable function, lifting height can be controlled accurately. Due to above reasons, quality of the tank is ensured.
3. The simple chain type hydraulic jacking system is easy to operate. Construction environment is good and work efficiency is high.
4. The simple chain type hydraulic jacking system is well-adapted. As long as the number of hydraulic hoists is increased or decreased, the whole set of equipment can be applied to the inverted hydraulic lifting construction of large storage tanks with different volumes ranging from several thousand cubic meters to tens of thousands cubic meters.
5. The hydraulic pump station and the hydraulic hoist are placed in the tank for easy operation. Finally, a door-closing plate is reserved to move the equipment out of the storage tank, and the door-closing plate is group welded well.
6. The hydraulic pump station can be controlled singly or jointly, and has strong construction adaptability and excellent technical performance price ratio.
7. Short construction period, low cost and good economic benefit. Due to the high degree of modernization and the fast lifting speed of the complete set of equipment, it has low construction cost and good economic benefit. This technology is truly characterized with convenient and centralized control, simple operation, safety and reliability (no falling), accurate control of weld clearance and lifting height of heavy objects, which can ensure the quality of the project, save labor and reduce costs, and achieve remarkable economic benefits.
Wincoo Engineering Co.,ltd is a hydraulic machinery manufacturing company integrated with design, development, production and sales, which mainly manufactures LYT-type chain-type hydraulic hoist, SQD unfixing holding-latch hydraulic hoist and supporting products. Such products are mainly used for inverted lifting and installation of steel storage tanks. Founded in 2003, after years of concentrated scientific research and development, the company obtained the patent certificate of "Utility Model Hydraulic Hoist' issued by "China National Intellectual Property Administration", and the right to use the trademark of "WINCOO" in 2008, so as to enable products of Wincoo Engineering Co.,ltd to quickly become Chinese brands.
Simple chuck type hydraulic Jack is a double acting hydraulic jack (also known as hydraulic lifting machine) with upper and lower clamping heads divided into two bodies. It is suitable for lifting construction of various large storage tanks (steel) or other heavy objects. It needs to cooperate with the lifting rod to achieve reciprocating lifting work.
What do you know about simple chunk type hydraulic jack?
What is the working principle of the simple chunk type hydraulic jack?
What are the characteristics of simple chunk type hydraulic jack?
The simple chunk type hydraulic jack comprises an oil cylinder and a piston, the upper and lower ends of the oil cylinder are respectively provided with an upper cylinder head and a lower cylinder head, and the upper cylinder head and the lower cylinder head are respectively provided with an oil inlet and outlet hole; The piston is arranged in the middle of the piston rod, the both ends of the piston rod respectively extend out of the upper cylinder head and the lower cylinder head, the piston rod is hollow, and the lifting rod axial through the piston rod, the lifting rod on the upper side and the lower side of the piston rod are respectively provided with a locking device; The locking device comprises a gripping part set on the lifting rod, the gripping part is provided with a large and small conical hole, the inner side of the conical hole is circumferentially provided with a number of wedge blocks; The outer surface of the wedge block is compatible with the conical hole, the inner side of the wedge block is provided with a clamping tooth, the clamping tooth is held on the lifting rod, the wedge block is provided with a circular spring chuck; The spring chuck is provided with a plurality of round holes, a round hole is provided with a reset spring, the upper side of the spring chuck is provided with an annular cover fixed with the grip part, and the both ends of the reset spring are respectively conflicted between the lower end face of the wedge block and the cover; The grip part on the upper side of the locking device is relatively fixed with the upper end of the piston rod, and the grip part on the lower side of the locking device is relatively fixed with the lower cylinder head by the support.
Simple chunk type hydraulic jack (package unit) is evenly distributed around tank inner wall. Tank top and upper (the first layer) wall plates are lifted first and then install and weld wall plates of tank body. Self locking hydraulic jack and hydraulic hoist composing of lifting frame and lifting rod are adopted. When oil enters hydraulic jack, upper clamp fastens and lifts lifting rod and expansion ring and mobilize tank (including tank top) to ascend upward. When oil returns to jack, upper clamp returns with piston and lower clamp automatically fastens lifting rod without gliding. The simple chunk type hydraulic jack repeats the movement and make lifting rod ascend with tank to designated height (spare height for next layer of plate). After butt weld of next layer of wall plates, open upper and lower loosening device and loosen upper and lower clamp to make lifting rod and expansion ring descend to lower expanded and welded rib plate of the next layer of wall plates and then lift. Repeat the process and ascend welded tan till the last layer of wall plates are installed and welded. The installation of the whole storage tank is completed.
1, Simple chunk type hydraulic jack adopts low relaxation steel strand, as long as there is a reasonable bearing lifting point, lifting height is not restricted;
2, Through the expansion and combination of simple chunk type hydraulic jack, the lifting weight, span and area are unlimited;
3, Small volume, light weight, large bearing capacity, convenient and flexible installation, especially suitable for small space or indoor large tonnage tank lifting;
4, The simple chunk type hydraulic jack has reverse motion self-locking, which makes the lifting process very convenient, and the storage tank can be locked reliably at any position in the lifting process for a long time;
5, The simple chunk type hydraulic jack has a high degree of automation, convenient and flexible operation, with automatic operation, semi-automatic operation, single point adjustment, manual operation and other operations. LCD display, touch screen display, button operation panel display, very intuitive. And the control system is equipped with self-correction protection procedures, even if the misoperation will not cause accidents;
6, Using this series of simple chunk type hydraulic jack, the construction period is short, the cost is low, the economic benefit is good.
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipment for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction, industrial production lines, clean energy project and other industrial field.
Based on full communication and trust, our customer in north Africa placed an order of nearly $150,000 for long-distance pipeline equipment within two days, and then paid 20% deposit within four days and agreed to deliver within seven days.
We will be more professional spirit and positive attitude to ensure that the customer's construction site smoothly.
We are halfway through 2022, and we sold nearly 200 hydraulic lifting machine in the first half of the year, so we are looking forward to the sales expectations of hydraulic lifting machine in the second half of the year.
Projects already under discussion
Regular customers from the past
New customers via online platforms such as Google Stand alone
The largest hydraulic lifting machine project we are talking about is 40 hydraulic lifting machine and 10 tank welders that the salesman is talking about. After the unremitting efforts of colleagues and the support of technical staff, the customer has placed an order to us, the hydraulic lifting machine is in an orderly production.
Regular customers from the past
According to our past experience, our old customers will place orders with us again. Because most of our customers are professional tank contractors, each year will undertake a considerable number of tank construction projects. Hydraulic lifting machine is an inevitable machine used in tank construction, in order to save labor costs and protect the safety of staff. We promise to serve our customers with our best attitude and product quality. What we do most is always repeat business
New customers via online platforms such as Google Stand alone
Due to objective reasons such as the epidemic situation, we cannot visit customers abroad as we did before, and customers cannot conveniently visit factories in China. Therefore, we have developed more ways to develop and contact customers, such as Google Independent website, Alibaba International website, Made in China and other online platforms, so that customers around the world can see and understand our products online anytime and anywhere. Through these channels, we have come into contact with many new customers. I believe that customers will see and trust us through our professional ability and quality products.
WINCOO ENGINEERING CO., LTD has ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour costs and higher efficiency construction/fabrication method and better quality during phase of project bidding.
Welding machines refer to electrical appliances that provide power with certain characteristics for welding. Tank welding machines are widely used in various industrial fields, such as aerospace, shipbuilding, and automobiles due to their flexibility, simplicity, convenience, firmness, reliability, and strength even after welding. So how do we use the tank welding machine?
Here is the content list:
l What are the classifications of tank welding machine?
l The main features of tank welding machine.
l How to use a tank welding machine?
What are the classifications of tank welding machine?
There is no authoritative classification method for the classification of tank welding machine. The following classification is mainly based on the simple classification of the industry use on the market:
1. The tank welding machines mainly used by industrial and mining enterprises are: AC arc welding machine, DC electric welding machine, argon arc welding machine, carbon dioxide shielded welding machine, butt welding machine, spot welding machine, submerged arc welding machine, high frequency welding machine , Flash butt welding machine, pressure welding machine, butt welding machine, laser welding machine, AC welding machine and DC welding machine
2. There are two types of DC tank welding machine: one is to install rectifier components on the basis of AC motor, and the other is DC generator. DC welding machines mainly weld non-ferrous metals and pig iron. The AC welder mainly welds steel plates.
3. Argon arc welding machine, carbon dioxide protection welding machine, high frequency welding machine, flash butt welding machine. The argon arc welding machine and carbon dioxide shielded welding machine can mainly weld thin plates and non-ferrous gold layers below 2mm. The flash butt welding machine mainly connects copper and aluminum joints and other objects, and the high-frequency welding machine mainly welds steel pipes in the pipe factory.
4. Submerged arc welding mainly welds thick steel structure materials such as steel structural parts, bridge H steel, and I-beam beams.
5. Gas shielded welding: argon arc welding, carbon dioxide shielded welding, will not be oxidized when welding under the protection of gas, melting welding is firm, non-ferrous metals, thin materials can be welded.
6. Laser welding machine: can weld the leads inside the transistor.
7. Butt welding machine: the iron ropes and other objects on the anchors of the cable chain factory are mainly welded. It can be docked with Yuangang etc.
8. Multifunctional tank welding machine.
9. Spot welding machine.
10. Butt welding machine.
11. Bolt welding machine.
12. Carbon dioxide and ammonia gas welding machine.
The main features of tank welding machine.
l Reasonable design and free adjustment. Tank welding machines with different discharge frequencies can be selected according to different metal materials to achieve the best repair effect.
l The heat affected area is small. There is no heat input during the instant of cladding, so there is no deformation, undercut and residual stress. No partial annealing will occur, and no need to re-heat treatment after repair.
l The impact of tank welding machine is extremely small. The welding machine overcomes the impact of ordinary argon arc welding on the periphery of the work piece in the welding repair process. It is also possible to repair the work surface with no allowance.
l High repair accuracy. The surfacing thickness ranges from a few microns to a few millimeters, and only needs to be polished and polished.
l High welding strength. Due to the full penetration of the material on the surface of the work piece, a strong bonding force is produced.
l Adopt ring precision control.
How to use a tank welding machine?
l Check the connection
After completing the wiring of the tank welding machine, you must check each installed connector to confirm that it is well connected before starting to operate the equipment. Its contents include:
1. The line connection is correct and reasonable, and the grounding must meet the specified requirements
2. The magnetic work piece gripper shall not have attached metal particles and splashes on its contact surface;
3. The coiled welding cable should be unrolled before use to avoid overheating and insulation damage;
4. When it is necessary to alternately use different lengths of cables, insulating joints should be provided to ensure that useless lengths can be disconnected when not needed.
There must not be any leakage of cooling water, shielding gas or engine oil that affects the safety of welders.
l Work suspension
When the welding work is suspended (for example, during breaks), the output terminal of the equipment or welding machine must be turned off or the power supply must be cut off.
l Mobile welding machine
When you need to move the tank welding machine, you must first cut off the power supply at its input end.
l Equipment not used
The metal electrode and carbon electrode must be removed from the welding tongs when not in use to eliminate the risk of electric shock to personnel or conductive objects. The welding tongs must be placed out of contact with persons, electrical conductors, flammable objects or compressed air bottles when not in use. The welding torch of the semi-automatic welding machine must be properly placed when not in use to avoid accidental activation of the gun body switch.
All arc welding equipment must be maintained at any time and kept in a safe worki
Wincoo Engineering Co., Ltd (WINCOO) is committed to providing customers with the most suitable equipment, involving pipeline manufacturing, storage tank construction, pipeline construction, industrial production lines, clean energy projects and other industrial fields. Next, we will introduce the characteristics of tank hydraulic jacking system in detail.
Here is the content list:
l What is the service scope of tank hydraulic jacking system?
l Product parameter introduction of tank hydraulic jacking system.
l Production technical characteristics of tank hydraulic jacking system.
What is the service scope of tank hydraulic jacking system?
WINCOO is committed to providing customers, manufacturers, EPC/C companies with the most suitable solutions/equipment, involving pipeline manufacturing, storage tank construction, pipeline construction, industrial production lines, clean energy projects and other industries field.The scope of supply of our tank hydraulic jacking system:
l x 1 set of power pump station: hydraulic power supply, electric motor power 4KW, rated flow of about 15l/min.
l 5 sets of x jack cylinders: rated 25 tons (18 tons, 100%) (including hydraulic jack device components-steel cables, support devices, tie rods, etc.)
l The fuel tank structure requires a jacking control system.
l Each jacking control system includes: 1 set of x electrical control and operation panel.
l Each set includes: 1 centralized PLC operation control box, 1 power supply cabinet with centralized buttons and automatic PLC control system or single handle operation control.
l Motor and PLC are both SIMENS brand!
l The main electrical components are Schneider brand!
l Joint ventures with well-known brands in the United States and China!
Product parameter introduction of tank hydraulic jacking system.
Maximum output force
Maximum lifting height
Cylinder lifting speed
Oil pump flow
Motor working voltage
about 220 V
Electromagnetic directional valve voltage
about 220 V
Required temperature range
Production technical characteristics of tank hydraulic jacking system.
1. The tank hydraulic jacking system is composed of hydraulic pump station, cylinder, steel wire and stroke, easy to install and operate.
2. The tank hydraulic jacking system uses PLC central control to handle elevators. Each power unit is equipped with an auxiliary balance device to ensure the accuracy of simultaneous lifting.
3. The tank hydraulic jacking system has two operating modes: auxiliary manual control and central control. The cylinder can be adjusted to lift individually, or it can be combined with several other lifts to form a group, or it can be integrated into multiple groups of lifting to achieve better accuracy and better welding effect.
4. All cylinders are equipped with safety valves, which can be automatically locked, even in the case of power failure, high-pressure hose rupture, bursting, it can prevent the cylinder oil tank from falling.
5. The cylinder is equipped with a high-pressure hose to avoid oil leakage that often occurs with traditional multiple hoses. The cylinder will return to its original state due to its own weight.
6. The stroke of the hydraulic cylinder of the tank hydraulic jacking system is 1475mm, which can be lifted in a single step by 2630plate to meet each annular shell. Greatly reduce time waste.
7. The basic height of the hydraulic cylinder is 2050mm, which can be used with automatic ring welding machine for inner ring seam welding.
8. Module configuration, the number of tank hydraulic jacking system can be adjusted according to the size and weight of the tank.
9. High efficiency, it only takes about 15 minutes to rise or fall each time.
10. The tank hydraulic jacking system can work well with our tank welding machine, which can greatly reduce labor costs and reduce construction time
11. Usually a horizontal seam welder can be equipped with 6-10 skilled welders, a vertical seam welder can be equipped with about 20 to 30 skilled welders, and a butt fillet welding tractor can be matched with 6 to 15 skilled welders.