YT series hydraulic tank jacks is a set of large-scale equipment specially developed by our company for the national crude oil reserve project, which is suitable for the inversion welding engineering of giant steel cylinder tank.
This type of equipment is single-acting two-stage hydraulic cylinder (hydraulic jack), used for vertical take-off and landing work, return need external force or self-weight back, can’t be used for horizontal work.The equipment has strict and compact structure, safe and stable, easy operation, adjustable load, quick installation and high synchronization accuracy.
●The oil box
●The hydraulic system
●The hydraulic cylinder
The oil tank is a closed type box with hydraulic oil to provide oil source for the equipment.
1.Liquid level meter shows the oil level and liquid temperature in the box.
2.The air filter has the function of protecting and purifying the gas of hydraulic oil.
3.The lifting lug is used for equipment lifting.
Hydraulic system is the power source of the whole hydraulic lifting equipment, first with the motor todrive the piston pump, and then the mechanical energy of the pump into pressure energy, through the pressure valve (relief valve), direction valve (solenoid valve), sent to the actuator (hydraulic cylinder), and finally converted into mechanical energy to drive the load.
1.Protective cover can be disassembled, it mainly protect all parts under the protective cover .
2.Electromagnetic directional valve through the electromagnet with electricity and no electricity to complete the lifting action of the hydraulic cylinder.
3.The relief valve can control the pressure of the system to maintain constant by adjusting the handle of the relief valve, and realize the function of regulating, stabilizing or limiting the pressure.The set of equipment relief valve setting range (0-31.5mpa).
4.Pressure gauge shows the system pressure value.
5.The high-pressure ball valve makes the hydraulic oil flow or cut-off in the system. The valve mainly plays a safety protection role in this set of equipment.. It prevents the internal leakage of the hydraulic valve from affecting the operation of the hydraulic cylinder's descending equipment. Hydraulic fluid flow or cut-off is controlled by rotating high pressure ball valve handle.
1.Hydraulic cylinder is the actuator, rated output force is 250kN.
2.The hydraulic cylinder roof device is the force fulcrum of the piston rod end of the hydraulic Cylinder. In the process of lifting the tank, to prevent the damage of the hydraulic cylinder caused by the bending of the piston rod, or even failure and safety accidents.
3.Adjust the jacking bolt to adjust the gap between the hydraulic cylinder bracket and the tank wall, and tighten the bracket in the process of lifting the tank.
4.The hydraulic cylinder support regulating rod can mainly meet the requirements of resistance to class 5 wind load and tank partial load during the tank lifting process. It can also assist in adjusting the gap between hydraulic cylinder bracket and tank wall when rising circle falls back.
5.The equipment adopts PLC equalization system with automatic and manual modes.And the man-machine control interface is set on the control cabinet.The displacement sensor transmits signals to adjust the equipment at the same height
6.The working principle of the displacement sensor: because the wire rope is wound on a pulley built into the sensor, and the other end of the sensor has been connected to the mechanical movement, which is equipped with a display, so when the wire rope is pulled, the mechanical movement can be converted into electrical signals, so as to get the required data.
7.Unidirectional explosion-proof valve is a safety valve that allows the hydraulic cylinder to self-lock.In the process of being lifted or in the process of hanging the tank, the tank will not slide or fall because of the sudden explosion of the high-pressure hose, blurting, sudden power failure, etc.
WINCOO Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipment for client, fabricators, EPC/C companies on pipe fabrication,tank construction, pipeline construction ,industrial production lines, clean energy project and other industrial field.
Products are widely used in aviation, aerospace, electric power, metallurgy,nuclear power, ships, automobiles, construction machinery, lifting and transportation machinery, machine tools, plastics, chemical industry, paper making,packaging, printing, rubber, textile, printing and dyeing, cement, medicine, food, oil,mining, fire, construction, military and other fields;And for the major design institute(such as: iron and steel design institute, electric power design institute, chemical design institute, etc.) to provide quality technical support and service.
Pipe spool fabrication line refers to the manufacturing (cutting, chamfering, welding) of metal pipes and elbows to manufacture pipelines or pipeline structures, which are commonly used in the oil and gas industry and offshore industries. The pipe spool fabrication line actually prepares all the tube ends from the manufacturing tube to the tube and from the tube to the elbow. Next, describe in detail what is the pipe spool fabrication line?
Here is the content list:
l What are the performance characteristics of the Pipe spool fabrication line?
l What is the industry standard for pipe spool fabrication line?
l What is the specific solution for Pipe spool fabrication line?
The first thing to understand is that most pipe spool fabrication lines are manufactured in tube shaft manufacturing workshops where there are cutting, sawing, beveling and welding machinery. WINCOO provides a full range of pipe spool fabrication solutions, pipe beveling machines for pipe shaft production lines and automatic devices for GMAW pipe welding.
① Gathering pipeline system
② Multiple sets of pipe cutting and bevel processing workstations
③ Multiple sets of mechanical pipeline assembly workstations
④ Multiple sets of pipeline automatic welding workstations
⑤ Establish more logistics transportation system or transportation system
⑥ One set of steel pipe frame
① Production efficiency: extremely high (hoisting by bridge crane, beveling by high-speed pipe cutting and beveling machine, and welding by automatic welding station)
② Applicable industries: petroleum, natural gas, oil refineries, petrochemicals, onshore and offshore, chemical engineering, nuclear power plants, shipbuilding, power stations, energy, aviation. It is especially suitable for the on-site tube shaft production line prefabrication system.
③ Production capacity: 20,000~150,000 DI per month (or depending on the size of the archive or the configuration of the machine), which reduces the manpower input, improves the level and efficiency of the pipe spool fabrication line, and saves more costs.
Carbon steel, stainless steel, alloy steel
200 mm to 12000 mm
Before and after walking
Railcar, two cars, 7.5m track, carrying capacity: <= 6T
400-600 inches in diameter / 10 hours
In addition, WINCOO also provides fixed mechanical equipment to prepare pipe ends with smooth and accurate chamfering to prepare for welding before manually or automatically welding pipe to pipe or bending pipe. We can provide you with a suggested tool set to get the correct pipe spool fabrication line!
In addition to the production of pipe spool fabrication line, WINCOO also produces pipe benders, roll grooving machines, and pipe welding machines. We also provide customized solutions to the engineering department. We are the global leader of pipe spool fabrication line and the leading provider of pipe spool fabrication line. We develop and use proprietary welding technology for computer applications for material control, production planning and pipe spool fabrication line.
Formulate industry standards for pipe spool fabrication line:
l Able to supply multiple large projects
l Can choose to use multiple facilities while maintaining a point of contact
l Fully integrated to meet customer material requirements, pipe manufacturing and module assembly
l Online access to the "real-time" status of manufacturing
l Standardized quality plan for all McDermott factories
l Energetic workforce, with unions and open shops
Pipe spool fabrication line is a process of welding pipe components (such as pipes, elbows, tees, flanges, etc.) into the engineering piping system in strict accordance with the design requirements of customers. We strategically have facilities using the most advanced technologies and processes on a global scale.
① The most advanced 1G TIG, 1G MIG and other automated welding processes
② Induction and cold bending
③ Robot cutting and welding
④ Indoor painting
⑤ Non-destructive inspection and heat treatment
⑥ Real-time online spool tracking
⑦ Color-coded barcode shipping label
Our mission is to establish strong partnerships with customers and provide comprehensive and information-rich services through product knowledge and maximum competitive efforts.
Our commitment to the technology investment of the pipe spool fabrication line ensures that the performance and reliability that meet the project execution requirements are improved. Through our main material distribution department, we can purchase materials globally and directly in the factory, while maintaining a large amount of standard inventory, project pre-purchase and invoicing materials!
What is more? WINCOO also provide customers with vairous pipeline construction solutions!
Wincoo Engineering Co., Ltd (WINCOO) is committed to providing customers with the most suitable equipment, involving pipeline manufacturing, storage tank construction, pipeline construction, industrial production lines, clean energy projects and other industrial fields. Next, we will introduce the characteristics of tank hydraulic jacking system in detail.
Here is the content list:
l What is the service scope of tank hydraulic jacking system?
l Product parameter introduction of tank hydraulic jacking system.
l Production technical characteristics of tank hydraulic jacking system.
What is the service scope of tank hydraulic jacking system?
WINCOO is committed to providing customers, manufacturers, EPC/C companies with the most suitable solutions/equipment, involving pipeline manufacturing, storage tank construction, pipeline construction, industrial production lines, clean energy projects and other industries field.The scope of supply of our tank hydraulic jacking system:
l x 1 set of power pump station: hydraulic power supply, electric motor power 4KW, rated flow of about 15l/min.
l 5 sets of x jack cylinders: rated 25 tons (18 tons, 100%) (including hydraulic jack device components-steel cables, support devices, tie rods, etc.)
l The fuel tank structure requires a jacking control system.
l Each jacking control system includes: 1 set of x electrical control and operation panel.
l Each set includes: 1 centralized PLC operation control box, 1 power supply cabinet with centralized buttons and automatic PLC control system or single handle operation control.
l Motor and PLC are both SIMENS brand!
l The main electrical components are Schneider brand!
l Joint ventures with well-known brands in the United States and China!
Product parameter introduction of tank hydraulic jacking system.
Maximum output force
Maximum lifting height
Cylinder lifting speed
Oil pump flow
Motor working voltage
about 220 V
Electromagnetic directional valve voltage
about 220 V
Required temperature range
Production technical characteristics of tank hydraulic jacking system.
1. The tank hydraulic jacking system is composed of hydraulic pump station, cylinder, steel wire and stroke, easy to install and operate.
2. The tank hydraulic jacking system uses PLC central control to handle elevators. Each power unit is equipped with an auxiliary balance device to ensure the accuracy of simultaneous lifting.
3. The tank hydraulic jacking system has two operating modes: auxiliary manual control and central control. The cylinder can be adjusted to lift individually, or it can be combined with several other lifts to form a group, or it can be integrated into multiple groups of lifting to achieve better accuracy and better welding effect.
4. All cylinders are equipped with safety valves, which can be automatically locked, even in the case of power failure, high-pressure hose rupture, bursting, it can prevent the cylinder oil tank from falling.
5. The cylinder is equipped with a high-pressure hose to avoid oil leakage that often occurs with traditional multiple hoses. The cylinder will return to its original state due to its own weight.
6. The stroke of the hydraulic cylinder of the tank hydraulic jacking system is 1475mm, which can be lifted in a single step by 2630plate to meet each annular shell. Greatly reduce time waste.
7. The basic height of the hydraulic cylinder is 2050mm, which can be used with automatic ring welding machine for inner ring seam welding.
8. Module configuration, the number of tank hydraulic jacking system can be adjusted according to the size and weight of the tank.
9. High efficiency, it only takes about 15 minutes to rise or fall each time.
10. The tank hydraulic jacking system can work well with our tank welding machine, which can greatly reduce labor costs and reduce construction time
11. Usually a horizontal seam welder can be equipped with 6-10 skilled welders, a vertical seam welder can be equipped with about 20 to 30 skilled welders, and a butt fillet welding tractor can be matched with 6 to 15 skilled welders.
Before using the fuel tank hydraulic jacking system, you should fully check whether the metal structural components and appearance are intact, whether the sound is normal when running at no load, whether the brake is reliable for heavy load testing, whether the safety limits and protection devices are intact, and the most indispensable Is the safety device reliable?
Here is the content list:
l What are the operational safety requirements for tank hydraulic jacking system?
l What is the safety device of the tank hydraulic jacking system?
l Specific operating rules for tank hydraulic jacking system.
1. Tank hydraulic jacking system drivers and signal personnel must be specially trained
2. Pay attention to whether the tower type learned by the tank hydraulic jacking system driver is consistent with the actual tower type
3. Implement a dedicated person and plane to manage tank hydraulic jacking system, captain responsibility system, and strict handover system
4. The newly installed tank hydraulic jacking system or the tank hydraulic jacking system after overhaul must be commissioned according to the instructions.
5. Keep a safe distance between tank hydraulic jacking system and overhead transmission lines
6. Applicable fire extinguishing equipment should be equipped in the driver's cabin of tank hydraulic jacking system
The installation of tank hydraulic jacking system shall not use aluminum conductor and screw steel as grounding body or underground grounding wire. The wires connected by bolts must have one end. There are three main ways to ground:
① The grounding body adopts regular grounding piles, or 33*4.5 long 1.5m steel pipe, or 70*70 long 1.5m angle steel.
② The grounding plate is made of steel plate or other ductile metal plate, with an area of 1 square meter and a depth of 1.5m from the ground.
③ Copper conductors with a cross-section of not less than 28 mm or steel conductors with a cross-section of not less than 50 mm are buried in the wire slot, and the buried length is determined by the grounding resistance.
In the above three methods, the cross-sectional area of the copper wire drawn from the grounding body should not be less than 25. If the soil is poorly conductive, sodium chloride (table salt) can be buried in the soil. Then fill it with water. For the tank hydraulic jacking system, each rail must be grounded, the two rails should be connected by a wire, and the two rails should also be electrically connected.
l About tank hydraulic jacking system safety device:
1. A safety device that prevents the sling on the hook from slipping off automatically.
2. Install a compression spring sheet at the opening of the hook head to close the opening. This spring sheet can only be pressed down and cannot be turned up after the sling is put in. It can prevent the sling of the tank hydraulic jacking system from falling off automatically.
3. Drum safety device: An effective measure to prevent accidents caused by improper winding of the steel wire rope beyond the drum.
4. A steel bar is welded outside the drum to restrict the wire rope to only move within the drum.
5. Fixed foundation: The digging trench is 600mm deep, concrete is poured on the lime soil, the surface is smooth, and there are waterproof and grounding protection measures.
Before use, check that the metal structural parts and appearance are in good condition, the sound is normal when running under no load, the brake is reliable in the heavy load test, the safety limit and protection devices are complete, and the action is sensitive and reliable before operation.
When operating each controller, it should be operated step by step, and it is strictly forbidden to operate over gear. When changing the direction of rotation, the operating handle should be reset to zero, and the motor should stop rotating before reversing the operation. Strive for stability, and it is strictly forbidden to start and stop.
During the operation of the tank hydraulic jacking system, if any abnormality of the machinery is found, it should be shut down immediately for inspection, and operation can only be carried out after the fault is eliminated.
It is strictly forbidden to work with a certificate, and it is strictly forbidden to work after drinking. It is strictly forbidden to use the travel switch to replace the parking operation. It is strictly forbidden to work in violation of regulations, leave the work post or give the machine to others to drive.
When loading heavy objects, you should leave the ground at a certain distance and check that the brake is reliable before proceeding.Insist on "ten" not hanging. After the operation is completed, the box should be powered off and the machine should be "crossed"!