 |
| Quantity: | |
|---|---|
WINCOO-TRACTOR-P/J
WINCOO
The tractor are mobile units can be easily transported to any workstation and adapted to fillet seam and flat seam. The modular design of the tractor make it easier to extend the units with additional devices, i.e. flux supply unit and flux recovery unit. Suitable components can be combined in an optimum way for every welding process.
For the tank welding machine, we has been sold more than 20 countries in more than 1000 projects sites.We have confidence for the machine quality and after sale service. We can provide single side, double side crude oil, LNG tank, fuel tank, water tank horizontal seam, vertical seam and bottom plate/corner welding machine.In Middle East, we have sold to UAE, Saudi Arabia, Oman, Bahrain, Kuwait. In Africa, we have sold machine to Cameron, Sudan, Egypt, Senegal, Nigeria,Zambia,Ethiopia,Senegal,etc. We have sold to vietnam, Indonesia , Malysia,Philippines,Singapore, Mexco,Mogulia, Russia,etc
Automatic Submerged Arc Bottom welder TRACTOR, applicable voltage 380V + 10% / 3PH / 50Hz, a single set of machine includes the following components:
No | Equipment composition | Manufacturer | Qty | ||||
1 | Welding Power Source | POWERPLUS 1000HD | LINCOLN China | 1 set | |||
2 | Automatic Welding Trolley | Welding Trolley | WINCOO | 1 set | |||
4 | Track | 1.8 Meters | WINCOO | 1 set | |||
5 | Welding And Control Cables | Welding Cable 150mm 2 X 30m | Chinese premium brand | 1 set | |||
6 | Control Cable 1.5 Mm 2 X 9p X 30m | ||||||
7 | Welding Ground Wire 150mm 2 X 5m | ||||||
8 | Safe Deposit Box | Power Distribution And Welding Power Storage Cabin | WINCOO | 1 set | |||
9 | Supporting Special Tools | Toolbox | WINCOO | 1 set | |||
10 | Accessories Along With Machine | See Attached Accessories List | WINCOO | 1 Lot | |||
1 | Adaptable material | Carbon steel, high strength steel, stainless steel, etc |
2 | Applicable plate thickness | More than 6mm |
3 | Applicable groove types | I-shaped groove, v-shaped groove, k-shaped groove, lap groove |
4 | Adaptation position | Flat welding, lap welding |
5 | Applicable welding wire | Φ2.0-Φ5.0mm diameter welding wire, Φ1.0-Φ1.2mm × 1.0mm scrap wire submerged arc welding |
6 | Adapt to the welding process | Submerged arc automatic welding, submerged arc welding with scrap wire |
7 | After the bottom plate of the storage tank is hand-welded or Gas-shielded, the submerged arc welding with added scrap wire is used for one-time welding (10-12mm) | |
I. Automatic welding trolley WINCOO | |||
1 | Welding torch deflection angle | 45 ° | |
2 | Wire reel capacity | 25kg | |
3 | Wire diameter | 2.4-5.0mm | |
4 | Head lift height adjustment | ± 50mm | |
5 | Wire feed speed range | 0.3-3m / min | |
6 | Travelling speed | 0.2-1.5m / min | |
II. Operation Panel | |||
1 | Complete all the control of the welding machine | including power supply and control, adjustment | |
2 | Welding control cabinet | With two sets of control functions (cc / cv) and multiple features | |
Welding current range | 0-1000A | ||
Welding start and stop control buttons | |||
Welding current potentiometer adjustment (including wire feed speed adjustment) | |||
Welding voltage potentiometer adjustment | |||
Ammeter | 0-1000A | ||
Voltmeter | 0-60V | ||
Travelling speed potentiometer setting | |||
Travelling direction switch: left, stop, right | |||
Travelling mode switch | Independent Travelling, welding continuous Travelling | ||
III. Supporting welding power supply | |||
1 | Welding power supply | LINCOLN China POWERPLUS 1000HD | |
2 | Primary voltage | 380V / 3 phase ± 10%, 50 / 60HZ | |
3 | Rated current | DC1000A | |
4 | Temporary load rate | 100% | |
5 | External characteristics | CC / CV (falling characteristics / constant voltage characteristics) | |
6 | Output current | 200-1200A | |
7 | Output voltage | 1000A / 44V | |
IV. Safe deposit box | |||
1 | Completely enclosed power supply distribution control cabinet and welding power storage box, that is, safe box | ||
2 | The closed storage box is made of section steel and steel plate, which is suitable for on-site rainproof, anti-theft and long-distance transportation | ||
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipments for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
Our Services & Strength
*We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.
*Based client’s facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.
*To support project execution, we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipments/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.
