H-beam combination workstation is used for H-beam or T-beam assembly, welding and straightening. It centralize the assembly, welding and straightening functions on one machine which saves space and economize workshop.Reduce workflows: shorten the production time and improve the efficiency. Economize the investment of crane equipment and operator.
These machines are specifically designed for the manufacture of welded "T" and double "T" girder-beams with parallel or converging flange.They enable the welding to be carried out on items with the web located vertically and without any need for tacking.Tacking will only be required at the top in order to obtain the proper angle between the web and the flange.When double "T" beams are being manufactured, once the first flange has been welded, the beam is flipped over and fed back into the unit once again.
This machine is capable of welding both symmetrical and non-symmetrical beams without the need for tacking;A flange post-deformation device mounted at the machine exit enables the machine to compensate for any flange deformation resulting from the welding process.This device is easily adjustable to handle various flange dimensions and a variety of different deformable thicknesses up to a maximum of 40 mm at maximum width.The welding line can be equipped with a control PLC from Mitsubishi.
1.Beam Welding Line" automatic, two heads submerged arc-welding lines for T / I girder beam;
2.2sets of American Lincon DC-1000, NA-3S SAW welding system to ensure good welding quality;
3.Japan Mitsubishi PLC controller;
4.Hydraulic type post deformation device to straighten the beam;
5.The beam is fed into the machine and both sides of the beam are welded simultaneously;
6.Save space and economize workshop; shorten the production time and improve the efficiency;
7.Economize the investment of crane equipment and operator;
|Suitable web height mm||200-1800|
|Suitable web thickness mm||6-32|
|Suitable flange width mm||200-800|
|Suitable flange thickness mm||6-40|
|Straightening thickness mm||6-35|
|Fillet height mm||<=8|
|Work-piece length mm||4000-15000|
|Feeding speed m/min||0.2-2 (VFD)|
|Input conveyor m||3conveyorss, each 2.6m (one powered)|
|Output conveyor m||11.5m, including lift conveyor|
|Machine power kW||18.1|
|Power supply||AC380V, 50HZ, 3P or tailor made|
|Above are our standard models and parameters, and it can be designed and manufactured on request.|
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipments for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
Our Services & Strength
We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.
Based client’s facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.
To support project execution, we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipments/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.