shipbuilding automatic pipe spool fabrication solution system- Manufacturers Suppliers Factory From China

The tank hydraulic jacking system is generally equipped with safety protection devices such as anti-falling, overloading, power failure, etc., rail-type external power unit, using hanging chains or cross bars at the entrance and exit of the table, guardrails and lifting platform operating warning lights or warning bells, when the door is opened Many functions such as a safety switch to close the circuit of the elevator platform. The tank hydraulic jacking system is extremely convenient and convenient for the operator to multi-point control of each working layer, jog or safe mode operation.

Here is the content list:

l Analysis on the application performance of the tank hydraulic jacking system.

l About the general layout of the tank hydraulic jacking system.

l The application environment analysis and prospect of the tank hydraulic jacking system.

Analysis on the application performance of the tank hydraulic jacking system.

The tank hydraulic jacking system product has a solid structure, large carrying capacity, stable lifting, simple and convenient installation and maintenance, and is an economical and practical low-floor replacement elevator ideal cargo conveying equipment. According to the installation environment and use requirements of the tank hydraulic jacking system, different fixed hydraulic jacks can be selected, and different optional configurations can be selected to complete the task of lifting objects and achieve better results.

If the tank hydraulic jacking system requires a large size, a fixed double-span hydraulic lift can be used. The double-span type has stable lifting, large carrying capacity and simple operation. It is widely used in vehicle maintenance, kilns, chemical plants, equipment supporting, etc. Industry use.

About the general layout of the tank hydraulic jacking system.

The tank hydraulic jacking system is suitable for installation and use under various environmental conditions indoors and outdoors. It can be installed in a closed hoistway or between open floors, in a concave foundation pit or on a flat ground according to usage requirements.

Due to the height of the building or work shelf, the size and weight of the objects carried by the tank hydraulic jacking system, and other requirements for use, there are many uncertain factors for its model. When the models shown in the list are not suitable for use requirements, the elevation, carrying capacity, platform area, etc. of the lifting platform can be combined according to the actual use environment and operating requirements to achieve the desired use effect.

The application environment analysis and prospect of the tank hydraulic jacking system.

Tank hydraulic jacking system is a kind of cargo lifting equipment with good lifting stability and wide applicability. It is mainly used for production line, automatic line transportation of goods with height difference on a certain section, material on-line and off-line, workpiece assembly and other lifting operations.

According to different working requirements and use environments, different tank hydraulic jacking system forms, power forms, control methods and other additional accessories can be configured. The tank hydraulic jacking system has a compact and stable structure and can adapt to high frequency continuous operation. The high stability of lifting can satisfy the stable lifting of large tonnage cargo. The tank hydraulic jacking system is equipped with a hydraulic system with anti-attachment and overload safety protection to ensure safe operation. Any configuration of rollers, balls, turntables, etc. can meet the requirements of different working conditions.

The oil tank hydraulic jacking system is a special hydraulic lifting platform for cargo transportation. It is mainly used for cargo transportation between various working layers such as warehouses, garages and workshops. Tank hydraulic jacking system has the advantages of wide applicability, large carrying capacity, safe and stable hoisting, and simple installation and maintenance. It is an economical and practical ideal cargo transportation equipment!

With the progress of social and economic development, people's demand for resources continues to increase, from automobiles that require diesel to power plants that require petroleum. In short, oil, natural gas and other resources have become indispensable things in people's daily life, so people gradually invented pipeline transportation methods. Next, I will introduce pipeline construction equipment in detail.

Here is the content list:

l What are the reasons for using pipeline construction equipment

l What is the specific process of pipeline construction

l What pipeline construction equipment is needed during pipeline construction

What are the reasons for using pipeline construction equipment

Due to the large volume of pipeline transportation, most of the pipelines are buried underground, occupying a small area, less terrain and object constraints, and short transportation distances.

Use pipeline construction equipment for sealed transportation, safe and reliable, long-term continuous and stable operation, easy to manage, easy to maintain, and realize remote centralized monitoring.

Therefore, a large number of pipeline laying work has been carried out in various countries, and related companies specializing in pipeline construction equipment have been derived. WINCOO is a company specializing in pipeline construction equipment.

What is the specific process of pipeline construction

There are many factors that can lead to operational defects in pipeline construction, such as inadequate installation technology, long construction period or insufficient supervision. Relevant technical personnel should be careful, careful, and concentrate on research and judgment when inspecting and accepting pipeline construction equipment.

Provide feedback and resolve the issue as quickly as possible. If the existing safety quality is not reached, the target area should be immediately compensated to ensure that the pipeline construction equipment can continue to operate safely. And maintain the original economic cost.

Specific process introduction:

Measuring arrangement→cleaning the construction work area; construction road→conveying anticorrosion pipe→processing tank→distributing pipe→preparing nozzle; pipeline assembly→pipe assembly and welding→welding joint inspection→heat shrinkable casing (tape) bushing→ trench excavation →Appearance repair.

What pipeline construction equipment is needed during pipeline construction

The following pipeline construction equipment is needed during pipeline construction:

l Transport anticorrosive pipe

l Pipe assembly

l Pipe assembly and welding

l Heat shrinkable sleeve (tape) bushing

With the continuous development of society, the demand for pipelines is also increasing, and the pressure on pipelines is increasing. During the installation and operation of pipeline construction equipment, welding is a basic technical job and also a vital job.

The safe and stable operation of pipeline construction equipment plays a key role in the overall pipeline operation. Therefore, increasing attention to the construction quality of pipeline construction equipment can lay a solid foundation for the normal operation of the factory!If you want to know more about high-quality pipe spool fabrication lines, you can also contact us at any time.

Hydraulic jack is an important machine for tank construction. The equipment is mainly used for inverted construction of vertical cylindrical steel tank (hydraulic lifting method) in petrochemical industry, inverted construction of steel liner in power plant chimney and inverted construction of vertical cylindrical low temperature tank. Next, we will introduce several types of hydraulic jack for you.

●Advanced hydraulic jack

●Simple unfixing Holding -latch hydraulic Jack

●Simple chain type hydraulic jack

Advanced hydraulic jack

T Series Hydraulic Tank lifting device is a large-scale equipment specially designed for the national oil reserve project developed suitable steel giant silo tank inversion welding process engineering.

Features: This type of device is a two-stage single-acting hydraulic cylinder (hydraulic jacks) for VTOL work force or return required from back position, it can not use for horizontal work. Structured compact device, Safe and stable, easy to operate, load adjustable, quick installation, high synchronization accuracy.YT Series Hydraulic Tank lifting device is "dragged five" Oil supply: Each pump station connected to the hydraulic cylinder 5; thus avoiding excessive tubing traditional centralized oil brings. Leakage points more than the disadvantages, to ensure that environmental pollution to a minimum.

Simple unfixing Holding -latch hydraulic Jack

Hydraulic lifting device (package unit) is evenly distributed around tank inner wall. Tank top and upper (the first layer) wall plates are lifted first and then install and weld wall plates of tank body. Self locking hydraulic jack and hydraulic hoist composing of lifting frame and lifting rod are adopted. When oil enters hydraulic jack, upper clamp fastens and lifts lifting rod and expansion ring and mobilize tank (including tank top) to ascend upward. When oil returns to jack, upper clamp returns with piston and lower clamp automatically fastens lifting rod without gliding. The jack repeats the movement and make lifting rod ascend with tank to designated height (spare height for next layer of plate). After butt weld of next layer of wall plates, open upper and lower loosening device and loosen upper and lower clamp to make lifting rod and expansion ring descend to lower expanded and welded rib plate of the next layer of wall plates and then lift. Repeat the process and ascend welded tan till the last layer of wall plates are installed and welded. The installation of the whole storage tank is completed.

Simple chain type hydraulic jack

chain type hydraulic jack is composed of one-stage double-acting hydraulic cylinder, pulley block, load-bearing chain and oil way etc. Moveable pulley is used to enlarge chain stroke, i.e. traveling distance of the cylinder is 1/2 of lifting distance of the chain. It applies to inverted installation and construction of various large tanks (steel) and various tanks.

Advantage:

1. Hydraulic lifting is stable, safe and reliable. Due to the adoption of unified hydraulic control and single or partial (several) adjustment, the whole lifting process is relatively stable. The hoist is provided with synchronizing valve and hydraulic lock to prevent sliding and falling of the tank or heavy loads, which are caused by power failure and fracture of oil tube. Hydraulic lifting is stable, safe and reliable. 

2. Construction quality is ensured. As the hoist is provided with synchronizer and adjustable function, lifting height can be controlled accurately. Due to above reasons, quality of the tank is ensured. 

3. The equipment is easy to operate. Construction environment is good and work efficiency is high. 

4. The equipment is well-adapted. As long as the number of hydraulic hoists is increased or decreased, the whole set of equipment can be applied to the inverted hydraulic lifting construction of large storage tanks with different volumes ranging from several thousand cubic meters to tens of thousands cubic meters. 

5. The hydraulic pump station and the hydraulic hoist are placed in the tank for easy operation. Finally, a door-closing plate is reserved to move the equipment out of the storage tank, and the door-closing plate is group welded well. 

6. The hydraulic pump station can be controlled singly or jointly, and has strong construction adaptability and excellent technical performance price ratio. 

7. Short construction period, low cost and good economic benefit. Due to the high degree of modernization and the fast lifting speed of the complete set of equipment, it has low construction cost and good economic benefit. This technology is truly characterized with convenient and centralized control, simple operation, safety and reliability (no falling), accurate control of weld clearance and lifting height of heavy objects, which can ensure the quality of the project, save labor and reduce costs, and achieve remarkable economic benefits.

These are the three types of hydraulic jacking system of our company. Our company Wincoo Engineering Co.,ltd is a hydraulic machinery manufacturing company integrated with design, development, production and sales, which mainly manufactures YT advanced hydraulic jack,LYT-type chain-type hydraulic hoist, SQD unfixing holding-latch hydraulic hoist and supporting products. Such products are mainly used for inverted lifting and installation of steel storage tanks. Founded in 2003, after years of concentrated scientific research and development, the company obtained the patent certificate of "Utility Model Hydraulic Hoist’ issued by "China National Intellectual Property Administration", and the right to use the trademark of "WINCOO" in 2008, so as to enable products of Wincoo Engineering Co.,ltd to quickly become Chinese brands.

Hydraulic storage tank lifting equipment is a kind of jack that uses a plunger or a hydraulic cylinder as a rigid jacking member. Simple lifting equipment is generally only equipped with a lifting mechanism to lift heavy objects.

Why do we maintain hydraulic storage tank lifting equipment in the right ways?

Why can't the hydraulic storage tank lifting equipment lift go up?

What are the advantages of hydraulic storage tank lifting equipment?

Why can we maintain hydraulic storage tank lifting equipment in the right ways?

(1) The bottom of the hydraulic storage tank lifting equipment should be flat and tough when used. Oil-free planks to expand the bearing surface and ensure safety. Can not use iron plate instead of wood, to prevent sliding.

(2) When lifting, it is required to be stable. After the heavy object is lifted for a while, it is necessary to check whether there is any abnormality. If there is no abnormality, the roof can continue to be lifted. Do not lengthen the handle arbitrarily or operate it too hard.

Why can't the hydraulic storage tank lifting equipment lift go up?

Most of the hydraulic storage tank lifting equipment lift hydraulic power source is used for lifting and lowering operations. With the aging of the mechanical structure, some small faults will inevitably occur after long-term use, such as the lift does not lift, so what is the reason? The hydraulic lift cannot afford There are many reasons for the rise, the common ones are:

1. The load is too heavy, exceeding the rated load, and the load can be reduced.

2. The oil return valve is not closed, causing the hydraulic system to not work normally, and the oil return valve needs to be tightened.

3. The filter is blocked, replace or clean the filter.

4. If the hydraulic oil is insufficient, add enough hydraulic oil to the lift.

What are the advantages of hydraulic storage tank lifting equipment?

Main features of hydraulic storage tank lifting equipment:

1. The system consists of hydraulic pump station, oil cylinder, steel wire and stroke. Easy to install and operate;

2. The system adopts PLC central control to handle elevators. Each power pack is equipped with an auxiliary balance device to ensure the accuracy of simultaneous lifting;

3. The hydraulic lifting pump station has two operation modes: auxiliary manual control and central control. The cylinder can be adjusted to lift individually or in multiple groups, or in combination with multiple groups to achieve better precision and better welding effect;

4. All cylinders are equipped with safety valves. In the event of power failure, high-pressure hose rupture, burst, etc., it can be automatically locked to prevent the cylinder/fuel tank from falling.

With a large number of suppliers, we can choose the right suppliers according to customers' requirements and provide the most cost-effective products. WINCOO ENGINEERING CO., LTD provides big pressure vessel, heavy duty pressure vessel, industrial pressure vessel, automatic pipeline construction equipment, electric vertical tank construction solution, etc.