Manipulator Welding Machine for inside Seam- China Manufacturers Factory Suppliers

The tank hydraulic jacking system is the most commonly used lifting equipment on construction sites. It is extended section by section. It is used to lift construction materials such as steel bars, wood corrugated, and scaffold pipes. YT series tank hydraulic jacking system is a large-scale equipment specially designed and developed for the national oil reserve project, which is suitable for the upside-down welding process engineering of large steel silos. What is a tank hydraulic jacking system?

Here is the content list:

l Product description of tank hydraulic jacking system.

l Briefly describe the use and method of tank hydraulic jacking system.

l What are the characteristics of tank hydraulic jacking system?

Product description of tank hydraulic jacking system.

The tank hydraulic jacking system is mainly used for the structure from top to bottom of the vertical tank, and can also be used for lifting or lifting large work pieces. First, we briefly summarize the working process of the tank hydraulic jacking system:

l Place the tank bottom plate of the tank hydraulic jacking system on the prepared foundation and weld them together.

l Assemble the roof beams or grids and finally connect them to the upper edge of the shell ring.

l Install the tank hydraulic jacking system equipment in the water tank. The plate of the second shell ring (next to the top ring) is located on the outside of the first shell.

l The completed part of the water tank (roof and top shell ring) is hydraulically lifted to a height where the plate of the second ring can be moved into place and the roof slab can be completed.

l The plates of the second shell ring are precisely positioned and welded together and fixed to the lower edge of the first ring.

l The plate of the third shell ring is placed outside the second shell ring.

l Lift the entire part of the tank (the top of the two uppermost shell rings).

l Repeat the above operation cycle until the last (bottom) housing ring is completed.

l The entire tank hydraulic jacking system is lowered to the bottom plate and welded to the bottom plate.

l Disassemble the lifting equipment of the tank hydraulic jacking system.

Briefly describe the use and method of tank hydraulic jacking system.

As a large-scale equipment specially designed and developed for the national oil reserve project, the YT series tank hydraulic jacking system is suitable for the upside-down welding process engineering of large steel silos.

Tank hydraulic jacking system is the welding engineering of giant steel silo upside-down technology, suitable for steel storage tanks with height ≤ 2.5 meters. The specific usage method is as follows:

l The overall structure, the vertical lifting displacement of the overall building.

l Inverted construction of large-span roof trusses and multi-story buildings.

l Large objects are lifted vertically.

What are the characteristics of tank hydraulic jacking system?

Tank hydraulic jacking system of equipment is a two-stage single-acting hydraulic cylinder (hydraulic jack), used for VTOL force or force that needs to return from the rear, so it cannot be used for horizontal work.

In addition, tank hydraulic jacking system is a compact device, safe and stable, easy to operate, adjustable load, fast installation, and high synchronization accuracy.

YT series tank hydraulic jacking system is used as a "drag five" oil supply device. Each pump station is connected to the hydraulic cylinder 5, thus avoiding the disadvantages of excessive and leaking caused by traditional centralized oil pipes and ensuring environmental pollution Minimize!

When using the tank welding machine, the operator puts the lamp tube into the fixture, presses the start button, the two pressing cylinders descend to position the workpiece in the ultrasonic mold cavity, and then the ultrasonic welding head acts to trigger the ultrasonic wave, and the welding head carries out the workpiece. After welding and welding, the cylinder drives the upper die to reset, the pressing cylinder rises, and the operator takes out the workpiece to complete one operation.

What are the characteristics of automatic vertical welder?

What is the working principle of tank welding machine?

What is the working effect of tank welding machine?

What are the characteristics of automatic vertical welder?

Automatic vertical welder is high-efficiency automatic welding equipment that uses current feedback closed-loop control of vehicle lift. The thickness of the welded joint can be up to 50mm at one time. Mainly used for thick plate welding in petroleum, chemical, blast furnace, shipbuilding and other industries. EGW vertical gas electric welding machine is a kind of high-efficiency automatic welding equipment improved according to the current feedback closed-loop control welding trolley. The main feature of automatic vertical welder is that the thickness is from 10mm to 50mm in one pass of forced water cooling. At the same time, the molten pool level is automatically controlled, and the wire extension length is automatically adjusted. Small size and light weight welding trolley, flexible and modular, easy to update and easy to use. Widely used in petroleum, chemical, blast furnace thick plate welding and shipbuilding industries.

What is the working principle of tank welding machine?

In most cases, the EGW used in the tank welding machine uses carbon dioxide gas as a protective gas, but sometimes pure argon, argon carbon dioxide mixed gas, argon oxygen mixed gas, and argon helium mixed gas are used. Welding wire is often made of flux wire that creates slag and provides an aesthetically pleasing weld, but sometimes solid wire is used.

Tank welding machine surrounds the molten pool with the base metal end and copper lining or refractory lining material, and can perform vertical upward welding while preventing dripping of molten metal, so it can be welded in a single pass (single operation) Welding of thick plates. Its applications include welding of vertical butt joints such as ship side outer panels, bridge construction, storage tanks, pressure vessels, etc.

What is the working effect of tank welding machine?

Tank welding machine is usually used for welding thicker materials such as low carbon steel and medium carbon steel, and can also be used for welding austenitic stainless steel and other metal alloys. The thickness of the plate is 12~80mm the most suitable. If it is larger than 80mm, it is difficult to obtain a sufficient and good protective effect, resulting in pores in the weld, uneven penetration and incomplete penetration. The length of the welded joint is generally unlimited. Single-layer welding is the most commonly used welding method, but multi-layer welding can also be used.

Complete after-sales service, WINCOO ENGINEERING CO., LTD can provide online and offline technical support, not only video guidance, but also on-site guidance, want to know more about high efficiency pipeline construction equipment, horizontal pipeline construction equipment, stainless steel pressure vessel, etc.

Containerized pipe spool fabrication solution is to carry out pipe design, prefabrication management, pipe cutting, pipe groove processing, welding, logistics and anti-corrosion paint, pipe flaw detection and other work in a fixed area.

• What is the significance of the emergence of the solution of container pipe spool fabrication line?

• What are the advantages of the solution of container pipe spool fabrication line?

• What are the characteristics of the solution of container pipe spool fabrication line?

What is the significance of the emergence of the solution of container pipe spool fabrication line?

In order to give full play to the advantages of pipeline prefabrication equipment and overcome the limitations of fixed pipeline prefabrication lines, we developed a solution of container pipe spool fabrication line, which has been widely used in companies such as PetroChina, Sinopec, and China National Chemical Corporation.

Solution of container pipe spool fabrication line consists of pipe beveling station, pipe mechanical assembly station, automatic pipe welding station, quick release steel structure station frame, trolley railing system and light rail. Transportation System. Pipe manufacturing is carried out through the field of pipe manufacturing. At present, the comprehensive performance of the solution of container pipe spool fabrication line will reach a higher level in China.

What are the advantages of the solution of container pipe spool fabrication line?

1. The detailed design adopts the most advanced "Pipeline Manufacturing Design System" software in China to realize the rapid drawing of pipeline single-line diagram and pipe section diagram. After configuring the IDF interface module, the design data of the PDS and PDMS design institutes can be directly shared, realizing the "seamless connection" between design and construction.

2. The solution of container pipe spool fabrication line adopts the domestic first-class "pipe manufacturing and installation management system" software to realize the all-around information management of the whole manufacturing process.

3. The groove adopts a reliable mobile pipe groove station, and the pipe groove adopts two methods

4. The solution of container pipe spool fabrication line adopts the tumbler type pipe plasma cutting and beveling machine, and adopts the method of thermal cutting to cut the pipe and form the groove in one step.

What are the characteristics of the solution of container pipe spool fabrication line?

The solution of container pipe spool fabrication line is a key link in the realization of project objectives in the field of energy and petrochemicals. The products in the solution of container pipe spool fabrication line will be used in various spool workshops. Materials and manufacturing standards can be ASME/ASTM, PED, JIS, GB, TS, etc. STE can undertake material procurement, cutting, assembling, welding, painting, spool lining and coating, supporting fabrication and spool field installation work scope. Wincoo has third-party qualified 5G and 6G ASME/PED welders, and has long been engaged in the manufacture of high-strength steel, alloy and various stainless-steel spools.

Wincoo Engineering Co., Ltd (WINCOO) has ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour costs and higher efficiency construction/fabrication method and better quality during phase of project bidding.

Wincoo Engineering Co., Ltd (WINCOO) is committed to providing customers, manufacturers, EPC/C companies with the most suitable pipe spool fabrication solutions/equipment, involving pipeline manufacturing, storage tank construction, pipeline construction, industrial production lines, clean energy projects and other industries field.

Here is the content list:

l About the service tenet of WINCOO's pipe spool fabrication line.

l What is the scope of after-sales service of WINCOO's pipe spool fabrication line?

l Quality assurance of WINCOO's pipe spool fabrication line.

What is the after-sales service system of WINCOO's pipe spool fabrication line?

We have the ability to provide feasible pipe spool fabrication line solutions to support customers to obtain shorter project execution time, less man-hour costs, more efficient construction methods and higher quality in the project bidding stage.

According to the customer's facility space availability, we can research and provide matching configurations on the project schedule to ensure that the pipe spool fabrication line production schedule meets the project requirements!

What is the scope of after-sales service of WINCOO's pipe spool fabrication line?

We set up a technology center for pipe spool fabrication line to absorb industry talents while importing ISO9001 standards. We introduce advanced foreign equipment. All of this comes from our desire to deliver more and better pipe spool fabrication line to you!

In order to let you feel more of our services, WINCOO purposefully built a three-in-one daily service system of market management office, marketing service office, and special dealers. No matter where you are in the country, as long as you need pipe spool fabrication line, you can enjoy our close service at any time.

In order to solve your technical and quality difficulties during the construction of the pipe spool fabrication line, WINCOO has set up a technical service department to provide you with pipe spool fabrication line technical services anytime, anywhere!

Quality assurance of WINCOO's pipe spool fabrication line.

Dare to issue a written pipe spool fabrication line service promise, and see the quality and credibility of the pipe spool fabrication line from one side. Consumers cannot afford to buy a pipe spool fabrication line without a written commitment. The general brand pipe spool fabrication line has complete after-sales service. Whether it has a 50-year quality guarantee on the warranty, and at the same time, it is necessary to see whether it is a double warranty.

The manufacturer is responsible for all compensation for losses caused by quality problems. In the construction of the pipe spool fabrication line, it is time to find a manufacturer with double warranty. 50 years of product quality and construction quality. Only with such a promise can consumers buy with confidence, buy comfortably, and use them with satisfaction. As long as you follow the correct purchase channel, you can buy a reliable pipe spool fabrication line! What is more? WINCOO also provide customers with various pipeline construction solutions!