Pipe spool fabrication line refers to the manufacturing (cutting, chamfering, welding) of metal pipes and elbows to manufacture pipelines or pipeline structures, which are commonly used in the oil and gas industry and offshore industries. The pipe spool fabrication line actually prepares all the tube ends from the manufacturing tube to the tube and from the tube to the elbow. Next, describe in detail what is the pipe spool fabrication line?
Here is the content list:
l What are the performance characteristics of the Pipe spool fabrication line?
l What is the industry standard for pipe spool fabrication line?
l What is the specific solution for Pipe spool fabrication line?
The first thing to understand is that most pipe spool fabrication lines are manufactured in tube shaft manufacturing workshops where there are cutting, sawing, beveling and welding machinery. WINCOO provides a full range of pipe spool fabrication solutions, pipe beveling machines for pipe shaft production lines and automatic devices for GMAW pipe welding.
① Gathering pipeline system
② Multiple sets of pipe cutting and bevel processing workstations
③ Multiple sets of mechanical pipeline assembly workstations
④ Multiple sets of pipeline automatic welding workstations
⑤ Establish more logistics transportation system or transportation system
⑥ One set of steel pipe frame
① Production efficiency: extremely high (hoisting by bridge crane, beveling by high-speed pipe cutting and beveling machine, and welding by automatic welding station)
② Applicable industries: petroleum, natural gas, oil refineries, petrochemicals, onshore and offshore, chemical engineering, nuclear power plants, shipbuilding, power stations, energy, aviation. It is especially suitable for the on-site tube shaft production line prefabrication system.
③ Production capacity: 20,000~150,000 DI per month (or depending on the size of the archive or the configuration of the machine), which reduces the manpower input, improves the level and efficiency of the pipe spool fabrication line, and saves more costs.
Carbon steel, stainless steel, alloy steel
200 mm to 12000 mm
Before and after walking
Railcar, two cars, 7.5m track, carrying capacity: <= 6T
400-600 inches in diameter / 10 hours
In addition, WINCOO also provides fixed mechanical equipment to prepare pipe ends with smooth and accurate chamfering to prepare for welding before manually or automatically welding pipe to pipe or bending pipe. We can provide you with a suggested tool set to get the correct pipe spool fabrication line!
In addition to the production of pipe spool fabrication line, WINCOO also produces pipe benders, roll grooving machines, and pipe welding machines. We also provide customized solutions to the engineering department. We are the global leader of pipe spool fabrication line and the leading provider of pipe spool fabrication line. We develop and use proprietary welding technology for computer applications for material control, production planning and pipe spool fabrication line.
Formulate industry standards for pipe spool fabrication line:
l Able to supply multiple large projects
l Can choose to use multiple facilities while maintaining a point of contact
l Fully integrated to meet customer material requirements, pipe manufacturing and module assembly
l Online access to the "real-time" status of manufacturing
l Standardized quality plan for all McDermott factories
l Energetic workforce, with unions and open shops
Pipe spool fabrication line is a process of welding pipe components (such as pipes, elbows, tees, flanges, etc.) into the engineering piping system in strict accordance with the design requirements of customers. We strategically have facilities using the most advanced technologies and processes on a global scale.
① The most advanced 1G TIG, 1G MIG and other automated welding processes
② Induction and cold bending
③ Robot cutting and welding
④ Indoor painting
⑤ Non-destructive inspection and heat treatment
⑥ Real-time online spool tracking
⑦ Color-coded barcode shipping label
Our mission is to establish strong partnerships with customers and provide comprehensive and information-rich services through product knowledge and maximum competitive efforts.
Our commitment to the technology investment of the pipe spool fabrication line ensures that the performance and reliability that meet the project execution requirements are improved. Through our main material distribution department, we can purchase materials globally and directly in the factory, while maintaining a large amount of standard inventory, project pre-purchase and invoicing materials!
What is more? WINCOO also provide customers with vairous pipeline construction solutions!
The solution of container tube coil production line is to prepare the installation. It is less difficult to prefabricate, so try to make pipe sections that can be prefabricated on the floor, which can speed up construction progress and reduce construction difficulties.
What is the production capacity of the solution of container tube coil production line?
What kind of equipment do we need for the solution of container tube coil production line?
What is the installation process in the Solution of Container Pipe Spool production line?
Production capacity: 36.000 diameter inch/year
Applicable tube diameter: DN50-600
Applicable pipe length: 0-12m
Applicable tube weight: 0-12T
Bevel shape: U, V, Double-V
chamfer speed: ≦5min (DN200 SCH40)
Conveyor speed: 2-20m/min
Automatic welding rate: ≧60%
Production rate: 50%-80%
Design software: PDSOFT PSFMS
Management software: PDSOFT PSFMS
The Pipe Spool Fabrication Line consists of seven steps: blasting→cutting→chamfering→adjusting→welding→non-destructive testing→paint spraying.
1. Blasting machine
We need to know the size, weight, material and degree of cleanliness of the workpiece, then we can offer you the suitable machine.
2. Cutting machine
There are three types of cutting machines: band saw cutting machine, 5-axis CNC burning and plasma cutting and profiling machine, as well as cutting and chamfering in one.
We need to know the size, weight, material of the workpiece, then we can offer you the suitable machine.
①Bandsaw machine is cold cutting, suitable for carbon steel, stainless steel, there are four lines 2-24 '', 8-32 '', 12-48 '' and 24-60 ''. It's PLC control, with fixed length function.
②5AXIS CNC Burning and Plasma Cutting and Roll Forming Machine is hot cutting, suitable for carbon steel. It's also PLC control.
③Cutting and chamfering in one is cold cutting, and there are three lines: 2-16 '', 2-12 '' and 2-8 ''.
3. The groove shape of bevel facing machine is J, U, V, X etc. It is a PLC or CNC control. 48'', 24-48'' and 24-60''.
We need to know the size, weight, material of the workpiece, then we can offer you the suitable machine.
4. Fitting-up machine
5. Welding machine, the welding process is root pass→filling→capping, there are two kinds of welding machines: split type and cantilever type.
6. Non-destructive testing is NDT, there are three testing methods: RT, UT and X-Ray.
7. Paint spraying can be reached through the spray booth.
We need to know the size and shape of the workpiece, then we can offer you a suitable machine.
The installation sequence in the solution of container pipe spool production line is the process of installing the prefabricated pipe sections and pipe equipment (valves, flow meters, etc.) at the position coordinates indicated in the drawing. It is generally installed in connection with equipment or steel construction. As a rule, it is better to prefabricate and assemble: a group of three, a master, a welder and a mechanic, sometimes a crane is required. First, the prefabricated pipe piece is pulled to the position to be installed, and then begin welding and installing according to the direction, flow direction, size, coordinates and orientation specified in the drawing. After completion, the installation is completed, and then the mounting installation is carried out, the pressure test is deleted and the work can be delivered.
Wincoo Engineering Co., Ltd (WINCOO) has been focused on developing and producing solutions for the manufacture of container tube coils for several years, and is committed to providing perfect service to every customer around the world.
The installation of pipeline construction equipment is one of the necessary parts in the pipe construction solution, and the installation and construction of pipeline construction equipment is a very important stage in project construction. Due to various factors in the project construction, there are many problems in the installation of pipeline construction equipment. To promote the improvement of the quality of industrial pipeline installation, certain measures need to be taken to control the installation quality of pipeline construction equipment to ensure the smooth construction of the project.
Here is the content list:
l Regarding the quality inspection of pipeline construction equipment installation.
l What are the quality control measures in the installation of pipeline construction equipment?
l Regarding the quality control of pipeline construction equipment after construction.
The sequence of installation of pipeline construction equipment is:
Measuring arrangement→cleaning the construction work area; construction road→conveying anticorrosion pipe→processing tank→distributing pipe→preparing nozzle; pipeline assembly→pipe assembly and welding→welding joint inspection→heat shrinkable casing (tape) bushing→ trench excavation →Appearance repair .
After the installation of pipeline construction equipment is completed, quality inspection is required. After pipeline construction equipment is installed and put into use, regular monitoring is required. Generally, radiographic inspection is used to inspect the quality of pipeline installation. This monitoring has a very good effect on the internal inspection of welded joints. It is widely used in the field of construction equipment installation. This method can also be used to make the quality of the pipeline meet the assessment standard.
Before installing pipeline construction equipment, clarify the construction plan of the construction technicians, use GB/T as the standard, and carry out construction in accordance with national standards and specifications; during the installation of pipeline construction equipment, strictly review the drawings for defects to ensure the rationality of the drawings, and the construction unit It is also necessary to make preparations for pipeline installation and construction, pipeline lumber, welding inspection, construction site management, etc.
Strictly follow the relevant requirements of pipeline construction equipment and pipeline construction requirements to improve the quality of construction. In order to ensure the quality of pipeline installation, quality control is required for key parts such as welding materials, welding processes, and welding seams to ensure pipeline construction equipment. Welding consumables, brands, specifications, etc. are required by the plan design, which are consistent with the project construction requirements to ensure the quality of installation.
① After the pipes, accessories and raw materials used for pipeline construction equipment enter the construction site, the supervisors shall check and accept them on site, and store the materials after passing the acceptance.
② Pipe joints and semi-finished products of pipeline construction equipment should be guaranteed not to be damaged during transportation and storage. When unloading, handle with care and not collide with each other; choose a flat place for stacking pipe joints.
③ The storage temperature of the rubber ring of pipeline construction equipment is between -5 and 30 degrees Celsius. It should not be exposed to ultraviolet light source and keep away from the heat source; the rubber ring and the items that easily affect the rubber ring should not be put together. If the pipeline construction equipment is being constructed In winter, hard rubber rings are not allowed.
④ For trench excavation in open-cut pipeline engineering, the section should meet the design requirements of construction quality, the original soil at the bottom of the trench should not be damaged, and the mechanical excavation should reserve a 200-300mm soil layer for manual excavation and leveling, and the bottom of the trench can be soaked by water And frost damage, if there is gravel soil, lime soil to backfill, the trench wall should be leveled to meet the requirements of construction design.
⑤ For concrete construction, when the pipe seat and flat foundation are poured in layers, the flat foundation should be shaved and rinsed; the concrete should be prevented from segregation, and the concrete should be cured after pouring.
⑥ When pipeline construction equipment is installed, visual inspection and internal cleanliness of the pipeline must be inspected.
⑦ The flexibility of pipe joints must meet the design requirements, and the rigidity must also meet the requirements.
⑧ In the stage of backfilling, the backfill height between both sides of the pipe and the top of the pipe before the hydraulic test of the pressure pipeline is greater than 0.5M, and the pressure-free pipeline shall be backfilled after the closed water test and the closed gas test have reached the standard.
After the completion of the pipeline construction equipment, the finishing work will begin. The unit needs to organize personnel to review the material documents involved in the pipeline installation, project reports, etc.; after the completion of the project, debugging and quality appraisal are required, and the pipeline professionals are organized to conduct quality appraisal of the installed pipelines. The dynamic control of the links will protect the completed pipelines.
In the later stage of the installation of pipeline construction equipment, in order to ensure the smooth completion of the project, the quality of the pipeline needs to be tested again to ensure that the pipeline installation does not have problems such as tilt and cracks, the welding parts are of good quality, and the pipeline is unobstructed. In the later period after the completion of the project, it is necessary to sort out each project data and work files involved in the pipeline construction, do a good job of archiving and backup to evaluate the quality of the pipeline, do a good job in risk control, and carry out the acceptance of pipeline construction equipment.
There are many influencing factors in the installation of pipeline construction equipmentt, so reasonable measures need to be taken to monitor and control every aspect of pipeline construction equipment. With the continuous expansion of the pipeline construction equipment construction industry, the use area is also expanding. Due to the importance of pipeline use, it is necessary to control the pipeline installation quality to ensure that the installation quality reaches the ideal standard!
What is more? WINCOO provide not only pipeline construction solutions, but also pipe spool fabrication solutions for customers from everywhere!
Edge milling machine is a kind of high speed milling cutter working principle, It is a welding auxiliary equipment for opening weld groove of steel plate before welding.Widely used in boiler, pressure vessel manufacturing industry, shipbuilding, electric power, petroleum, chemical machinery, engineering machinery manufacturing, can process all kinds of medium and low carbon steel plate, stainless steel plate and aluminum plate before welding bevel, straight edge, U bevel, etc.
●Application of edge milling machine
●Compared with the traditional edge milling machine
●The characteristics of the milling machine
Edge milling machine is widely used in boiler, pressure vessel manufacturing industry, shipbuilding, electric power, petroleum, chemical machinery, engineering machinery manufacturing, for all kinds of low carbon steel plate, stainless steel plate and aluminum plate before welding groove processing, bevel, straight edge, U-shaped groove can be a milling molding, compared with the edge planer,It has the advantages of low price, low energy consumption, high efficiency, high finish, easy operation and maintenance, etc.
In new edge milling machine can tear open outfit, and through heat treatment, the bed structure is reasonable, the milling head is more stable and reliable operation, the feed system and return completely independent, fast return, high efficiency, convenient adjustment of the Angle of the milling cutter and custom knife plate and standard knife dish interchangeable, it is the upgrading of the traditional edge milling machine.
As an alternative product of planer, edge milling machine has the advantages of high efficiency, high precision and low energy consumption.It is especially suitable for the groove processing of various shapes of carbon steel plate.Generally 6-80mm thickness, 0-60 degrees of arbitrary adjustment.
Performance of self-propelled edge milling machine:
1, Unique driving walking function
2, Special device stable processing accuracy
3, Special cutting all kinds of metal materials
4, Advanced cutting tools and long-term supply of different blades
The above is a brief introduction of our Wincoo edge milling machine, more models and parameters of the milling machine can be clicked into our website.
Hydraulic jack is an important machine for tank construction. The equipment is mainly used for inverted construction of vertical cylindrical steel tank (hydraulic lifting method) in petrochemical industry, inverted construction of steel liner in power plant chimney and inverted construction of vertical cylindrical low temperature tank. Next, we will introduce several types of hydraulic jack for you.
●Advanced hydraulic jack
●Simple unfixing Holding -latch hydraulic Jack
●Simple chain type hydraulic jack
T Series Hydraulic Tank lifting device is a large-scale equipment specially designed for the national oil reserve project developed suitable steel giant silo tank inversion welding process engineering.
Features: This type of device is a two-stage single-acting hydraulic cylinder (hydraulic jacks) for VTOL work force or return required from back position, it can not use for horizontal work. Structured compact device, Safe and stable, easy to operate, load adjustable, quick installation, high synchronization accuracy.YT Series Hydraulic Tank lifting device is "dragged five" Oil supply: Each pump station connected to the hydraulic cylinder 5; thus avoiding excessive tubing traditional centralized oil brings. Leakage points more than the disadvantages, to ensure that environmental pollution to a minimum.
Hydraulic lifting device (package unit) is evenly distributed around tank inner wall. Tank top and upper (the first layer) wall plates are lifted first and then install and weld wall plates of tank body. Self locking hydraulic jack and hydraulic hoist composing of lifting frame and lifting rod are adopted. When oil enters hydraulic jack, upper clamp fastens and lifts lifting rod and expansion ring and mobilize tank (including tank top) to ascend upward. When oil returns to jack, upper clamp returns with piston and lower clamp automatically fastens lifting rod without gliding. The jack repeats the movement and make lifting rod ascend with tank to designated height (spare height for next layer of plate). After butt weld of next layer of wall plates, open upper and lower loosening device and loosen upper and lower clamp to make lifting rod and expansion ring descend to lower expanded and welded rib plate of the next layer of wall plates and then lift. Repeat the process and ascend welded tan till the last layer of wall plates are installed and welded. The installation of the whole storage tank is completed.
chain type hydraulic jack is composed of one-stage double-acting hydraulic cylinder, pulley block, load-bearing chain and oil way etc. Moveable pulley is used to enlarge chain stroke, i.e. traveling distance of the cylinder is 1/2 of lifting distance of the chain. It applies to inverted installation and construction of various large tanks (steel) and various tanks.
1. Hydraulic lifting is stable, safe and reliable. Due to the adoption of unified hydraulic control and single or partial (several) adjustment, the whole lifting process is relatively stable. The hoist is provided with synchronizing valve and hydraulic lock to prevent sliding and falling of the tank or heavy loads, which are caused by power failure and fracture of oil tube. Hydraulic lifting is stable, safe and reliable.
2. Construction quality is ensured. As the hoist is provided with synchronizer and adjustable function, lifting height can be controlled accurately. Due to above reasons, quality of the tank is ensured.
3. The equipment is easy to operate. Construction environment is good and work efficiency is high.
4. The equipment is well-adapted. As long as the number of hydraulic hoists is increased or decreased, the whole set of equipment can be applied to the inverted hydraulic lifting construction of large storage tanks with different volumes ranging from several thousand cubic meters to tens of thousands cubic meters.
5. The hydraulic pump station and the hydraulic hoist are placed in the tank for easy operation. Finally, a door-closing plate is reserved to move the equipment out of the storage tank, and the door-closing plate is group welded well.
6. The hydraulic pump station can be controlled singly or jointly, and has strong construction adaptability and excellent technical performance price ratio.
7. Short construction period, low cost and good economic benefit. Due to the high degree of modernization and the fast lifting speed of the complete set of equipment, it has low construction cost and good economic benefit. This technology is truly characterized with convenient and centralized control, simple operation, safety and reliability (no falling), accurate control of weld clearance and lifting height of heavy objects, which can ensure the quality of the project, save labor and reduce costs, and achieve remarkable economic benefits.
These are the three types of hydraulic jacking system of our company. Our company Wincoo Engineering Co.,ltd is a hydraulic machinery manufacturing company integrated with design, development, production and sales, which mainly manufactures YT advanced hydraulic jack,LYT-type chain-type hydraulic hoist, SQD unfixing holding-latch hydraulic hoist and supporting products. Such products are mainly used for inverted lifting and installation of steel storage tanks. Founded in 2003, after years of concentrated scientific research and development, the company obtained the patent certificate of "Utility Model Hydraulic Hoist’ issued by "China National Intellectual Property Administration", and the right to use the trademark of "WINCOO" in 2008, so as to enable products of Wincoo Engineering Co.,ltd to quickly become Chinese brands.