In today's international environment, oil is used more and more frequently, and its price is also rising. More and more producers, middlemen or users are building tanks to store oil. In order to build the tanks more quickly, we inevitably need to replace labor with machinery, thus saving time and labor costs. Today we will introduce to you a few of our company specialized in building storage tank machinery.
●Automatic tank horizontal welding machine
●Tank vertical welding machine
●Automatic Submerged Arc Welding Tractor
●Hydraulic jacking system
WINCOO offers the Automatic Girth Welder for tank fabrication applications. Unlike other girth welders on the market, WINCOO AGW comes standard with a Dual Drive System and other features unique to our machines. This self-propelled submerged arc welding system can reduce field storage tank welding time by 40% by increasing arc on time and reduce weld defects. The models run directly on the tank and carry the operator, eliminating the need for Scaffolding while ensuring operator comfort and safety. The girth welder, due to their modular design, are applicable for top down or bottom up constructed single or double wall storage tanks. our design allows us to offer custom-built units for special applications.
Min Tank Diameter
Top to Bottom& Bottom to Top
Electro-gas welder(EGW) is designed to weld the vertical joints of atmospheric flat bottom storage tanks, it features high heat input to achieve maximum productivity while maintaining acceptable quality.EGW can be used to weld joints up to 1in.(25mm) thick in a single pass, and takes about 1.2hours to weld an 8ft(2438mm) vertical seam. Compared with the 5.3hours it takes to weld the same seam using conventional flux cored arc welding(FCAW) process, this represents a 400% improvement in productivity.
Min Tank Diameter
The tractor are mobile units can be easily transported to any workstation and adapted to fillet seam and flat seam. The modular design of the tractor make it easier to extend the units with additional devices, i.e. flux supply unit and flux recovery unit. Suitable components can be combined in an optimum way for every welding process.
6mm and above
Carbon steel, Stainless Steel
Square groove, Single V groove, Double V groove, Lap joint
Dimension(L x W x H)
800mm x 500mm x 700mm
T Series Hydraulic Tank lifting device is a large-scale equipment specially designed for the national oil reserve project developed suitable steel giant silo tank inversion welding process engineering.
Uses: steel giant silo tank inversion process of welding engineering. It applies to steel tanks height ≤2.5 meters (special plates are negotiable).
1. vertical lift displacement of the overall structure, the overall building.
2. large span roof truss and flip construction of multi-storey buildings.
3. large objects vertical lifting, lifting.
Features: 1, This type of device is a two-stage single-acting hydraulic cylinder (hydraulic jacks) for VTOL work force or return required from back position, it can not use for horizontal work.
2, Structured compact device, Safe and stable, easy to operate, load adjustable, quick installation, high synchronization accuracy.
3, YT Series Hydraulic Tank lifting device is "dragged five" Oil supply: Each pump station connected to the hydraulic cylinder 5; thus avoiding excessive tubing traditional centralized oil brings,
4, Leakage points more than the disadvantages, to ensure that environmental pollution to a minimum.
The above is the welding machine and hydraulic jack for tank construction, of course, this is only a brief introduction, they also have more specific classification, you are welcome to visit our website to browse more product information.
The orbital welding machine uses the arc to burn between the electrode and the workpiece as a heat source to heat the electrode and the base metal. Under the action of the arc heat source, the molten electrode metal and the partially molten base metal form a molten pool, and the molten pool solidifies to form a weld.
How does an orbital welding machine work?
What is the Product parameter of orbital welding machine work?
What are the economic benefits of using an orbital welding machine?
The orbital welding machine uses the heat energy generated by the combustion of the oxygen-acetylene flame to heat the ends of the butt-welded rails to a molten state, and then applies a certain upsetting pressure to weld the rail ends. There are two existing methods: factory welding and mobile welding. Factory welding is the same as contact welding. The mobile welding method, also known as small air pressure welding, is mainly used to weld the joint joints of the long rails on the construction site. The quality of air pressure welding is also better. Aluminothermic welding. Put the prepared aluminothermic flux (made of metal aluminum, iron oxide, iron alloy and iron nail head, etc.) into a special crucible, ignite the flux with a high-temperature match, and produce a strong chemical reduction reaction to obtain high-temperature molten steel and molten steel. Slag, after the reaction is calm, inject it into the preheated sand mold tightly fastened to the ends of the two rails, melt both ends of the butt joints, remove the sand mold after cooling, and reshape the welded joint in time. Welded into one. The quality of aluminothermic welding is poor, and the fatigue strength is even worse, only reaching 45% to 70% of the base metal.
Suitable pipe: More than 130mm
Pipe wall thickness: 4-50mm
Suitable for C.S, S.S, A.S, low temperature steel (S.S is with special rail)
Suitable seam welding: Pipe to pipe, pipe to elbow, pipe to flange
Drive system: Stepping motor wheels and Gear/worm transferring
Drive system: Button to add and subtract speed
Adjustment manner: Electrical circuitry control
Oscillating system: The company's proprietary technology products, swing stepper motor
Control system: The company's proprietary technology products, the digital control.
(1) Orbital welding machine can run smoothly, safely and reliably.
(2) Orbital welding machine prolongs the service life of running vehicles and rails and reduces maintenance costs.
(3) Practice has proved that the running speed of vehicles running on seamless tracks can be increased by 20% to 40%, which can improve productivity for factories with busy vehicles and large distances, and its economic benefits are very obvious.
(4) The use of the orbital welding machine eliminates the vibration noise of the joint to a certain extent and improves the working environment. The drivers of the vehicles running on the seamless track generally report that the operation is smooth and comfortable. After testing, the driver's indoor noise has been reduced by more than 10dB, and the outdoor noise has been reduced by more than 35dB.
Orbital welding machines have been used in many fields.Wincoo Engineering Co., Ltd maintains close relationships with customers in orbital welding machine industry, and is committed to strengthening production and operation, improving quality and safety.
Tank hydraulic jacking system is mainly a closed or meshed hoistway enclosed by buildings or light steel structures and hydraulically driven cylinders to lift the platform. So what are the advantages and disadvantages of the use of tank hydraulic jacking system?
Here is the content list:
l What are the components of the tank hydraulic jacking system?
l What are the advantages and disadvantages of tank hydraulic jacking system?
l How to deal with the shortcomings of tank hydraulic jacking system?
A complete tank hydraulic jacking system consists of five parts, namely power components, executive components, control components, auxiliary components (accessories) and hydraulic oil.
The function of the power element is to convert the mechanical energy of the prime mover into the pressure energy of the liquid, which refers to the oil pump in the hydraulic system, which provides power to the entire hydraulic system. The structure of hydraulic pumps generally includes gear pumps, vane pumps, plunger pumps and screw pumps.
The function of the executive components (such as hydraulic cylinders and hydraulic motors) is to convert the pressure energy of the liquid into mechanical energy, and drive the load for linear reciprocating motion or rotary motion.
Auxiliary components include fuel tanks, oil filters, coolers, heaters, accumulators, oil pipes and pipe joints, sealing rings, quick-change joints, high-pressure ball valves, hose assemblies, pressure measuring joints, pressure gauges, oil level gauges, oil Thermometer etc.
The tank hydraulic jacking system consists of hydraulic pump station, oil cylinder, steel wire and stroke, which is easy to install and operate. The tank hydraulic jacking system uses PLC central control for lifting. Each power unit is equipped with an auxiliary balance device to ensure the accuracy of simultaneous lifting. In addition, the hydraulic lifting pump station has two operating modes: auxiliary manual control and control. The cylinder can be adjusted to lift individually, or it can be combined with other lifting units into a group, or it can be integrated with multiple lifts to achieve higher accuracy and better welding results!
On the other hand, all cylinders of the tank hydraulic jacking system are equipped with safety valves. It can be automatically locked, even in the event of a power failure, a rupture of the high-pressure hose, or a rupture, it can prevent the cylinder/fuel tank from falling. The number of tank hydraulic jacking system can be adjusted according to the tank size and weight high efficiency, it only takes 15 minutes for each rise or fall. It can be used in conjunction with our company's slot welding machine, which can greatly reduce labor costs and reduce construction time.
l Advantages of tank hydraulic jacking system:
1. Small size and light weight
2. Large rigidity, high precision and fast response
3. Large driving force, suitable for heavy load direct drive
4. Wide speed range and various speed control methods
5. Self-lubricating, self-cooling and long life
6. Easy to realize security protection
l Disadvantages of tank hydraulic jacking system:
1. Poor anti-contamination ability of working fluid
2. Sensitive to temperature changes
3. There is a hidden danger of leakage
4. Difficult to manufacture and high cost
5. It is not suitable for long-distance transmission and requires hydraulic energy
The tank hydraulic jacking system is generally flushed before it is officially put into operation. The purpose of flushing is to remove contaminants, metal chips, fiber compounds, iron cores, etc. remaining in the system. During the first two hours of work, even if the tank hydraulic jacking system is not completely damaged, It will also cause a series of failures. Therefore, the oil circuit of the tank hydraulic jacking system should be cleaned according to the following steps:
l 1) Clean the oil tank with an easy-to-dry cleaning solvent, and then use filtered air to remove solvent residues.
l 2) Clean all pipelines of the tank hydraulic jacking system. In some cases, the pipelines and joints need to be immersed.
l 3) Install oil filter in the pipeline to protect the oil supply pipeline and pressure pipeline of the valve.
l 4) Install a flushing plate on the current collector to replace precision valves, such as electro-hydraulic servo valves.
l 5) Check whether all pipelines are of appropriate size and connected correctly.
If it is found that the oil filter is clogged, change the oil filter immediately. The flushing cycle is determined by the structure of the tank hydraulic jacking system and the degree of system pollution. If the sample of the filter medium has no or few foreign pollutants, install a new oil filter and unload it. Flush the plate and install the valve to work! Planned maintenance: Establish a regular system maintenance system, and suggestions for better maintenance of the tank hydraulic jacking system are as follows:
l 1) Check and replace the oil at most 500 hours or three months.
l 2) Flush the imported oil filter of the oil pump regularly.
l 3) Check whether the hydraulic oil is contaminated by acidification or other pollutants. The smell of the hydraulic oil can roughly identify whether it has deteriorated.
l 4) Repair leaks in the tank hydraulic jacking system.
l 5) Ensure that no foreign particles enter the fuel tank from the vent cap of the fuel tank, the plug seat of the oil filter, the sealing gasket of the oil return line and other openings of the fuel tank.
In order to give full play to the advantages of pipeline prefabrication equipment and overcome the limitations of fixed pipe spool fabrication line, we have developed a movable pipe spool fabrication line, which has been used in PetroChina, Sinopec, and China National Chemical Corporation. So, what are the precautions for the quality inspection of the pipe spool fabrication line?
Here is the content list:
l About the quality inspection content of the pipe spool fabrication line.
l The product parameter mark on the pipe spool fabrication line.
l How to inspect the pipe spool fabrication line?
The pipe spool fabrication line consists of a work station for pipe beveling, a work station for pipe mechanical assembly, a work station for automatic pipe welding, a steel structure work station frame that can be quickly disassembled, a trolley railing system and a light rail to form a transportation system.
The testing items of the pipe spool fabrication line include: density, melt mass flow rate, hydrostatic pressure, ring stiffness, flatness, ring flexibility, thermal stability, volatile content, moisture content, carbon black content, carbon black dispersion, Pigment dispersion, gas component resistance, rapid crack propagation resistance component analysis, component content detection, etc.
The comprehensive performance of pipe spool fabrication line will reach a high level in China:
1. In the detailed design, China's most advanced "Pipe Manufacturing Design System" software is used to realize the rapid drawing of the pipe spool fabrication line. After the IDF interface module is configured, the design data of the PDS and PDMS design institutes can be directly shared, so a "seamless combination" is realized between design and construction.
2. In the manufacturing management, the domestic first-class "pipe manufacturing and installation management system" software is used to realize all-round information management of the entire pipe spool fabrication line manufacturing process.
3. Pipe spool fabrication line groove adopts a reliable pipeline groove mobile workbench, two of which are used for pipe groove.
4. Roller bed type pipe plasma cutting and beveling machines have been used to cut pipes and form bevels in one step through thermal cutting and processing.
5. An efficient pipe cutting band saw machine and a fixed radial pipe end beveling machine are used to cut the pipe and machine the bevel according to the working procedure.
6. The unique mobile workstation for pipe mechanical assembly in China has been used for weld assembly to mechanically assemble pipe shaft welds.
7. Cover pipe welding adopts advanced automatic pipe welding movable workstation, pipe spool fabrication line automatic welding machine is used to realize efficient automatic cover pipe welding of pipe shaft.
8. The logistics transportation adopts the light rail transportation system, the station frame and the trolley railing system. The light rail transportation system is used for long-distance mechanical logistics transportation, and the station frame is used for transportation. The overhead railing system is used for container internal and external logistics transportation.
9. The pipe spool fabrication line project has a production capacity of 3000 inches/year and a day's production capacity of 1000 inches/day, which meets the huge engineering demand for prefabricated pipelines.
Pipe spool fabrication line has now been widely used in all aspects of people's lives, and unqualified pipes directly affect people's quality of life and health. At the beginning of 2014, some media exposed the problem of individual companies using recycled waste to produce drinking water distribution pipes and fittings, which had a bad social impact. So how to enter the site to inspect the pipe spool fabrication line?
The material, specification, model and quality of the pipe spool fabrication line and pipe fittings should meet the current national product standards and design requirements.The appearance quality of the pipe spool fabrication line should not only meet the requirements of its product standards, but also the following requirements:
l There are no defects on the surface such as cracks, shrinkage holes, slag inclusions, folding, heavy leather, and rust or dents that do not exceed the negative deviation of the wall thickness;
l The thread surface is intact without damage, and the flange sealing surface is flat, smooth, without burrs and radial grooves;
l The gasket has no aging deterioration or delamination phenomenon, and no defects such as wrinkles on the surface.
l Inspection quantity: all inspections. Check the factory inspection report and certificate.
l Inspection method: observe and inspect.
l The size, wall thickness and allowable deviation of the pipe spool fabrication line should meet its product standards and design requirements.
l Inspection Quantity: 20% of the products of each specification and model are randomly checked by the number of pieces, and no less than 1 piece
l Inspection method: measure with steel ruler and vernier caliper.
For the pipe spool fabrication line belonging to one of the following conditions, sampling shall be conducted by the supervision engineer, and the inspection and re-inspection shall be carried out by a qualified inspection unit. The re-inspection results shall meet the current national product standards and design requirements.
The advantages of hydraulic storage tank lifting equipment are the main ones. With the continuous improvement of design, manufacture and use level, some disadvantages are gradually being overcome. hydraulic storage tank lifting equipment has broad prospects for development.
What are the structural advantages of hydraulic storage tank lifting equipment?
What are the advantages of using hydraulic storage tank lifting equipment?
What are the precautions for installation of hydraulic storage tank lifting equipment?
Since the hydraulic storage tank lifting equipment is connected by oil pipes, the transmission mechanism can be conveniently and flexibly arranged by the connection of oil pipes, which is superior to mechanical transmission. For example, a pump that extracts oil downhole can be driven by a hydraulic drive to overcome the inefficiency of long drive shafts. Due to the large thrust of the hydraulic cylinder and its easy arrangement, it has basically replaced the old-fashioned mechanical transmission in heavy construction machinery such as excavators, which is not only easy to operate, but also beautiful in appearance.
1. The hydraulic storage tank lifting equipment can realize stepless speed regulation in a wide range. With the help of valve or variable pump and variable motor, stepless speed regulation can be achieved, the speed regulation range can reach 1:2000, and the speed can be adjusted during the operation of the hydraulic device.
2. hydraulic storage tank lifting equipment, the thought transmission movement is uniform and stable, and the speed is relatively stable when the load changes. Because of this feature, almost all of the grinder drives in metal cutting machine tools now use hydraulic drives.
3. hydraulic storage tank lifting equipment is easy to achieve overload protection - by means of setting overflow valves, etc., and the hydraulic parts can be self-lubricated, so the service life is long.
4. hydraulic storage tank lifting equipment is easy to realize automation - with the help of various control valves, especially when hydraulic control and electrical control are used in combination, complex automatic work cycles can be easily realized, and remote control can be realized.
The central axis of the hydraulic storage tank lifting equipment should be concentric with the central line of the load force to avoid side force caused by the jacking operation, which may easily cause the seals to wear and the piston to be damaged. For hydraulic jacks for moving objects, keep the oil cylinder parallel to the moving object in the direction of movement during installation, otherwise the cooperation between the hydraulic jack and the moving object will be unreliable.
WINCOO ENGINEERING CO., LTD has ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour costs and higher efficiency construction/fabrication method and better quality during phase of project bidding.