Horizontal Girth Welding Machine- China Manufacturers Factory Suppliers

Tank welding machines are actually transformers with lower external characteristics, which convert 220V and 380V alternating current into low-voltage direct current. Electric welding machines can generally be divided into two types according to the output power source. Therefore, tank welding machines can be divided into many types according to different characteristics.

 

Here is the content list:

l Tank welding machines are classified according to power characteristics.

l What types of tank welding machines does WINCOO have?

l What are the classifications of tank welding machines based on the market industry?

 

Tank welding machines are classified according to power characteristics

One type of tank welding machine is AC power and the other is DC power. A DC welding machine can be said to be a high-power rectifier. It is divided into positive and negative poles. When AC power is input, it is transformed by a transformer, and then rectified by the rectifier, and then outputs a power source with reduced external characteristics.

 

The output terminal will produce huge voltage changes when it is switched on and off the tank welding machines. When the two poles are short-circuited momentarily, the arc is ignited, and the generated arc is used to melt the electrode and welding material, and after cooling, the purpose of combining them is achieved. Welding transformers have their own characteristics. The external characteristic is the sharp drop in voltage after the electrode is ignited.

 

What types of tank welding machines does WINCOO have

WINCOO provides automatic tank welding machines for tank manufacturing applications. Unlike other tank welding machines on the market, WINCOO AGW comes standard with a dual drive system and other features unique to our machines.

 

This automatic submerged arc welding system can reduce on-site tank welding time by 40% and reduce welding defects by increasing the arc on time. These models run directly on the fuel tank and carry the operator, eliminating the need for scaffolding, while ensuring the comfort and safety of the operator.

 

Due to the modular design, tank welding machines are suitable for single-wall or double-wall storage tanks constructed from top-down or bottom-up. Our design allows us to provide customized units for special applications.

 

EGW vertical gas-electric tank welding machines are highly efficient automatic welding equipment, which can control the improvement of the welding frame according to the current feedback closed loop. In a water-cooled forced welding seam, the main feature of a forming is the thickness from 10mm to 50mm.

 

The liquid level of the molten pool is automatically controlled, and the wire length is automatically adjusted. Small size, light weight welding frame and easy to update flexible modularization, easy to use. Widely used in petroleum, chemical, blast furnace thick plate welding and shipbuilding industries.

 

What are the classifications of tank welding machines based on the market industry

There is no authoritative classification method for the classification of tank welding machines. The following classification is mainly based on the simple classification of the industry use on the market:

1. The tank welding machines mainly used by industrial and mining enterprises are: AC arc welding machine, DC electric welding machine, argon arc welding machine, carbon dioxide shielded welding machine, butt welding machine, spot welding machine, submerged arc welding machine, high frequency welding machine , Flash butt welding machine, pressure welding machine, butt welding machine, laser welding machine, AC welding machine and DC welding machine

2. There are two types of DC tank welding machines: one is to install rectifier components on the basis of AC motor, and the other is DC generator. DC welding machines mainly weld non-ferrous metals and pig iron. The AC welder mainly welds steel plates.

3. Argon arc welding machine, carbon dioxide protection welding machine, high frequency welding machine, flash butt welding machine. The argon arc welding machine and carbon dioxide shielded welding machine can mainly weld thin plates and non-ferrous gold layers below 2mm. The flash butt welding machine mainly connects copper and aluminum joints and other objects, and the high-frequency welding machine mainly welds steel pipes in the pipe factory.

4. Submerged arc welding mainly welds thick steel structure materials such as steel structural parts, bridge H steel, and I-beam beams.

5. Gas shielded welding: argon arc welding, carbon dioxide shielded welding, will not be oxidized when welding under the protection of gas, melting welding is firm, non-ferrous metals, thin materials can be welded.

6. Laser welding machine: can weld the leads inside the transistor.

7. Butt welding machine: the iron ropes and other objects on the anchors of the cable chain factory are mainly welded. It can be docked with Yuangang etc.

8. Multifunctional tank welding machines.

9. Spot welding machine.

10. Butt welding machine.

11. Bolt welding machine.

12. Carbon dioxide and ammonia gas welding machine.

 

Wincoo Engineering Co. Ltd (WINCOO) is committed to providing customers, manufacturers, and companies with the most suitable tank welding machines, involving pipeline manufacturing, storage tank construction, pipeline construction, industrial production lines, clean energy projects and other industrial fields.

 

The tank welding machines we provide are not only suitable for automatic tank welding machines for tank manufacturing. Unlike the existing tank welding machines on the market, the MSHW series comes standard with a dual drive system. Tank welding machines are suitable for the inner and outer welding of single-layer or double-wall storage tanks from top to bottom or bottom to top. Greatly reduce welding defects and save tank installation costs!If you want to know more about high-quality pipe spool fabrication lines, you can also contact us at any time.

Hydraulic storage tank lifting equipment is a jack that uses a plunger or a hydraulic cylinder as a rigid jacking member. It has compact structure, stable operation and self-locking function.

How to properly maintain the hydraulic storage tank lifting equipment?

What reasons may cause the hydraulic storage tank lifting equipment lift to fail?

How does hydraulic storage tank lifting equipment work?

How to properly maintain the hydraulic storage tank lifting equipment?

1) The hydraulic storage tank lifting equipment uses oil as the medium, so the maintenance of the oil and the equipment must be done well to avoid blockage or oil leakage, which will affect the use effect.

2) For a new or long-established hydraulic storage tank lifting equipment, since there is a lot of air in the hydraulic cylinder, when it starts to use, the piston rod may have a small jump phenomenon, and the hydraulic storage tank lifting equipment can be reciprocated with no load. 2 to 3 times to remove the air in the cavity. The hydraulic storage tank lifting equipment that has been idle for a long time will harden due to the long-term non-working of the seal, which will affect the service life of the hydraulic jack. Therefore, when the hydraulic storage tank lifting equipment is not in use, it should be reciprocated 2 to 3 times a month with no load.

What reasons may cause the hydraulic storage tank lifting equipment lift to fail?

1. If the gear pump of the hydraulic storage tank lifting equipment lift is damaged, and the pumped oil has no pressure, it cannot be lifted, and the lift gear pump should be replaced.

2. The support valve or electromagnetic reversing valve of hydraulic storage tank lifting equipment lift fails to operate, and a new support valve or electromagnetic reversing valve needs to be replaced.

3. The manual pump and gear pump of the hydraulic storage tank lifting equipment lift leak oil. If the oil leak is serious, it will lead to insufficient power, and the sealing ring of the lifting oil pump needs to be replaced in time.

4. The circuit of hydraulic storage tank lifting equipment lift is open circuit. The hydraulic system is controlled by the circuit. If the circuit is short-circuited or open, it will also cause it to fail to lift. It is necessary to check the lift button contactor and fuse and other parts.

5. The check valve of the manual pump of the hydraulic storage tank lifting equipment lift is stuck and the return position fails. This kind of failure is more troublesome. The solution is to unscrew the oil pump valve port bolt, repair, clean, and replace the clean hydraulic oil.

How does hydraulic storage tank lifting equipment work?

The principle of hydraulic storage tank lifting equipment is based on Pascal's principle, that is, the pressure of the liquid is the same everywhere so that in a balanced system, the pressure exerted on the smaller piston is relatively small, and the pressure exerted on the larger piston is also relatively large to keep the liquid still.

Therefore, the hydraulic storage tank lifting equipment can obtain different pressures on different ends through the transmission of the liquid, so that a transformation purpose can be achieved. The hydraulic storage tank lifting equipment we see commonly uses this principle to achieve force transmission.

WINCOO ENGINEERING CO., LTD has committed to providing the most suitable hydraulic storage tank lifting equipment at a reasonable price, and whatever it takes to satisfy the customer’s needs.

In actual operation, in order to ensure that the installation quality of pipeline construction equipment meets the construction requirements, targeted solutions must be taken according to the problem and its cause. The following will explain the installation of pipeline construction equipment before, during and after installation.

 

Here is the content list:

l Regarding the control of pipeline construction equipment before construction.

l Regarding the control of pipeline construction equipment during construction.

l Regarding the control of pipeline construction equipment after construction.

 

Regarding the control of pipeline construction equipment before construction.

Before construction, in order to ensure that the material of the pipeline construction equipment used meets the industrial requirements, strict inspections need to be repeated, including repeated verification and review of the construction drawings, and careful inspection of the pipeline processing drawings to ensure that the pipelines in the drawings The processing regulations and calculated data meet actual requirements.

 

In addition, it is necessary to check whether the pipeline construction equipment required for installation has a quality certificate and whether the specifications and models of the pipeline correspond to the certificate, and whether it meets the corresponding installation requirements of the pipeline construction equipment.

 

Before construction, check the pipeline construction equipment for damage and other quality defects that affect the construction. In order to get a more accurate understanding of the pipe material, professional quality inspection instruments can be used. For example, high-pressure pipelines can be detected by the monitoring method of magnetic flaw detection. Ensure that the material of pipeline construction equipment meets industrial production requirements.

 

In terms of capital investment in the installation of pipeline construction equipment, manpower, materials, and instruments and tools used are the main capital consumption objects. Manufacturers need to have a detailed grasp of the use of funds to reduce costs as much as possible without affecting the quality of the project. When selecting manpower, low-skilled workers should be employed for jobs with low technical requirements. When selecting materials, pipeline construction equipment is often selected for comparison. Before construction, it is also necessary to conduct professional skills training for construction personnel to enhance their work skills.

 

Regarding the control of pipeline construction equipment during construction.

During the installation process, when the pipe is cut according to the drawings, it is necessary to use the corresponding operating tools and methods to cut according to the construction requirements and the pipe material to avoid damage to the pipe. When connecting pipes, the main construction methods are hot bending and cold bending.

 

Hot bending is performed in the pipeline construction equipment installation process after heating treatment, specialized functional personnel make it deform according to the construction requirements; cold bending is carried out at room temperature, the pipeline construction equipment deforms according to the construction requirements. Since heating will cause mechanical deformation of the pipeline, cold bending processing methods are mostly used in the construction process. In hot bending, different heating fuels, heating pipeline construction equipment, and heating techniques must be used according to different pipeline materials and construction requirements, and the heating temperature must be strictly controlled.

 

The hot-bent pipes must be maintained after installation to ensure their quality and durability. When welding, due to the different materials of the pipeline and the different connection methods of the pipeline during the laying process, the welding tools and techniques selected will be different. The welding technology requires high requirements, and the construction personnel need to have good experience and technology to make the pipeline can be Therefore, experienced technicians should be selected for the welding process during the installation of pipeline construction equipment, and professional equipment should be used for testing after the welding is completed to see if seamless welding has been achieved to meet the engineering requirements.

 

Regarding the control of pipeline construction equipment after construction.

After the completion of the pipeline construction equipment, quality inspection and maintenance of the pipeline are required. When performing quality inspections, professional monitoring equipment is generally used, such as radiographic inspection, which can achieve non-destructive inspection. When the test is in progress, a unified test standard shall be adopted in compliance with the relevant technical standards, with special attention to whether the units used are unified.

 

After the pipeline construction equipment is installed, in order to better ensure the quality of the pipeline, it needs to be treated with anti-corrosion treatment. Generally, paint is applied to isolate the pipeline and the air in the water and oxygen from chemical reaction and rust. Extend the service life of the pipeline, and also improve the safety of operations for those who perform production operations.

 

Pipeline construction equipment is widely used in industrial production and has strict quality requirements. Due to the different pipeline construction equipment used in different industrial production environments, it is easy to have some problems during the installation process, which will affect the quality of the installation project. To ensure pipeline construction the installation quality of equipment meets the requirements of industrial production, and the installation process needs to be carried out in strict accordance with the construction requirements.

The working principle of the rolling machine is to make the work roll move through the action of hydraulic pressure, mechanical force and other external forces, so that the sheet is bent or rolled into shape.

What are the operating taboos of the rolling machine?

How to operate the rolling machine safely and correctly?

What are the inspection measures for rolling machine?

What are the operating taboos of the rolling machine?

1. When multiple people work together on the rolling machine, there must be a special person to command.

2. It is strictly forbidden to overload the rolling machine.

3. The tilting and resetting of the lifting and turning bearing of the upper roller and the balance of the upper roller must be carried out after the main drive is stopped.

4. It is forbidden to pile up workpieces and sundries in the workplace, and keep the machine tool and the site clean at all times.

5. After the operation of the rolling machine is completed, the power supply should be cut off and the power box should be locked.

How to operate the rolling machine safely and correctly?

The first is that the operator should organize the surrounding environment of the operation before operating the rolling machine to maintain a good operating environment. At the same time, the operator must be neatly dressed to avoid pulling the corners of clothes into the roller during the operation. In the process of work, it must be noted that the operator can only stand on both sides of the workpiece, which is the most reasonable position. If you want to adjust and measure the roundness during the operation, you must stop the operation, and it is forbidden to operate during the operation. A certain margin should be left at the end of the processing part.

What are the inspection measures for rolling machine?

1. During the running process, if the rolling machine has irregular noise, impact and other abnormal phenomena, it should be stopped immediately for inspection.

2. During the operation, all personnel should coordinate with each other, obey the command of the person in charge of the rolling plate, and it is forbidden to start the machine without a password.

3. When operating the rolling machine, pay great attention to the fact that the hand is pressed by the steel plate and rolled in together with the steel plate.

4. Be careful not to collide with the machine when lifting the steel plate or reel with a crane. After the coiling is finished, make sure that all materials are finished and the site is cleared, and the maintenance of the equipment is done well, and the power is turned off in time.

Based on clients’ facility/site space availability, WINCOO ENGINEERING CO., LTD is able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace in accordance with project requirement. They are committed to providing various rolling machines of high quality for all customers from all over the world.

Jul 21, 2022 · Bangkok Mass Transit System PCL (BTSC), a subsidiary of the BTS Group, has received “Transport Deal of the Year” award under “The Asset Triple A Infrastructure Awards 2022” from The Asset, Asia's leading financial magazine, according to the success of the issuance of its green bonds worth 10.2 billion baht.

Enter the email address you signed up with and we'll email you a reset link.

Self Adjustable Welding Rotator Our welding rotators are designed on the basis of international advantage, they are required equipment of pressure vessel manufacturers.Theserotators are applied in both handling and automatic welding, widely to use to make pressure vessel and pipeline.Self-aligning welding rotator can adjust the wh

Fuel Tank Filters. The Dutton-Lainson Family. The Dutton-Lainson Company is a leading manufacturer of quality products for marine, agricultural, ... Contact Us; Careers; OUR PRODUCTS. Winches; Tongue Jacks; Couplers; Fencing Tools; Fuel Tank Filters; Oilers; CONNECT WITH US. 1601 W. 2nd Street Hastings, NE 68901 402-462-4141 customersupport ...