The tank hydraulic jacking system is generally equipped with safety protection devices such as anti-falling, overloading, power failure, etc., rail-type external power unit, using hanging chains or cross bars at the entrance and exit of the table, guardrails and lifting platform operating warning lights or warning bells, when the door is opened Many functions such as a safety switch to close the circuit of the elevator platform. The tank hydraulic jacking system is extremely convenient and convenient for the operator to multi-point control of each working layer, jog or safe mode operation.
Here is the content list:
l Analysis on the application performance of the tank hydraulic jacking system.
l About the general layout of the tank hydraulic jacking system.
l The application environment analysis and prospect of the tank hydraulic jacking system.
The tank hydraulic jacking system product has a solid structure, large carrying capacity, stable lifting, simple and convenient installation and maintenance, and is an economical and practical low-floor replacement elevator ideal cargo conveying equipment. According to the installation environment and use requirements of the tank hydraulic jacking system, different fixed hydraulic jacks can be selected, and different optional configurations can be selected to complete the task of lifting objects and achieve better results.
If the tank hydraulic jacking system requires a large size, a fixed double-span hydraulic lift can be used. The double-span type has stable lifting, large carrying capacity and simple operation. It is widely used in vehicle maintenance, kilns, chemical plants, equipment supporting, etc. Industry use.
The tank hydraulic jacking system is suitable for installation and use under various environmental conditions indoors and outdoors. It can be installed in a closed hoistway or between open floors, in a concave foundation pit or on a flat ground according to usage requirements.
Due to the height of the building or work shelf, the size and weight of the objects carried by the tank hydraulic jacking system, and other requirements for use, there are many uncertain factors for its model. When the models shown in the list are not suitable for use requirements, the elevation, carrying capacity, platform area, etc. of the lifting platform can be combined according to the actual use environment and operating requirements to achieve the desired use effect.
Tank hydraulic jacking system is a kind of cargo lifting equipment with good lifting stability and wide applicability. It is mainly used for production line, automatic line transportation of goods with height difference on a certain section, material on-line and off-line, workpiece assembly and other lifting operations.
According to different working requirements and use environments, different tank hydraulic jacking system forms, power forms, control methods and other additional accessories can be configured. The tank hydraulic jacking system has a compact and stable structure and can adapt to high frequency continuous operation. The high stability of lifting can satisfy the stable lifting of large tonnage cargo. The tank hydraulic jacking system is equipped with a hydraulic system with anti-attachment and overload safety protection to ensure safe operation. Any configuration of rollers, balls, turntables, etc. can meet the requirements of different working conditions.
The oil tank hydraulic jacking system is a special hydraulic lifting platform for cargo transportation. It is mainly used for cargo transportation between various working layers such as warehouses, garages and workshops. Tank hydraulic jacking system has the advantages of wide applicability, large carrying capacity, safe and stable hoisting, and simple installation and maintenance. It is an economical and practical ideal cargo transportation equipment!
In order to give full play to the advantages of pipeline prefabrication equipment and overcome the limitations of fixed pipe spool fabrication line, we have developed a movable pipe spool fabrication line, which has been used in PetroChina, Sinopec, and China National Chemical Corporation. So, what are the precautions for the quality inspection of the pipe spool fabrication line?
Here is the content list:
l About the quality inspection content of the pipe spool fabrication line.
l The product parameter mark on the pipe spool fabrication line.
l How to inspect the pipe spool fabrication line?
The pipe spool fabrication line consists of a work station for pipe beveling, a work station for pipe mechanical assembly, a work station for automatic pipe welding, a steel structure work station frame that can be quickly disassembled, a trolley railing system and a light rail to form a transportation system.
The testing items of the pipe spool fabrication line include: density, melt mass flow rate, hydrostatic pressure, ring stiffness, flatness, ring flexibility, thermal stability, volatile content, moisture content, carbon black content, carbon black dispersion, Pigment dispersion, gas component resistance, rapid crack propagation resistance component analysis, component content detection, etc.
The comprehensive performance of pipe spool fabrication line will reach a high level in China:
1. In the detailed design, China's most advanced "Pipe Manufacturing Design System" software is used to realize the rapid drawing of the pipe spool fabrication line. After the IDF interface module is configured, the design data of the PDS and PDMS design institutes can be directly shared, so a "seamless combination" is realized between design and construction.
2. In the manufacturing management, the domestic first-class "pipe manufacturing and installation management system" software is used to realize all-round information management of the entire pipe spool fabrication line manufacturing process.
3. Pipe spool fabrication line groove adopts a reliable pipeline groove mobile workbench, two of which are used for pipe groove.
4. Roller bed type pipe plasma cutting and beveling machines have been used to cut pipes and form bevels in one step through thermal cutting and processing.
5. An efficient pipe cutting band saw machine and a fixed radial pipe end beveling machine are used to cut the pipe and machine the bevel according to the working procedure.
6. The unique mobile workstation for pipe mechanical assembly in China has been used for weld assembly to mechanically assemble pipe shaft welds.
7. Cover pipe welding adopts advanced automatic pipe welding movable workstation, pipe spool fabrication line automatic welding machine is used to realize efficient automatic cover pipe welding of pipe shaft.
8. The logistics transportation adopts the light rail transportation system, the station frame and the trolley railing system. The light rail transportation system is used for long-distance mechanical logistics transportation, and the station frame is used for transportation. The overhead railing system is used for container internal and external logistics transportation.
9. The pipe spool fabrication line project has a production capacity of 3000 inches/year and a day's production capacity of 1000 inches/day, which meets the huge engineering demand for prefabricated pipelines.
Pipe spool fabrication line has now been widely used in all aspects of people's lives, and unqualified pipes directly affect people's quality of life and health. At the beginning of 2014, some media exposed the problem of individual companies using recycled waste to produce drinking water distribution pipes and fittings, which had a bad social impact. So how to enter the site to inspect the pipe spool fabrication line?
The material, specification, model and quality of the pipe spool fabrication line and pipe fittings should meet the current national product standards and design requirements.The appearance quality of the pipe spool fabrication line should not only meet the requirements of its product standards, but also the following requirements:
l There are no defects on the surface such as cracks, shrinkage holes, slag inclusions, folding, heavy leather, and rust or dents that do not exceed the negative deviation of the wall thickness;
l The thread surface is intact without damage, and the flange sealing surface is flat, smooth, without burrs and radial grooves;
l The gasket has no aging deterioration or delamination phenomenon, and no defects such as wrinkles on the surface.
l Inspection quantity: all inspections. Check the factory inspection report and certificate.
l Inspection method: observe and inspect.
l The size, wall thickness and allowable deviation of the pipe spool fabrication line should meet its product standards and design requirements.
l Inspection Quantity: 20% of the products of each specification and model are randomly checked by the number of pieces, and no less than 1 piece
l Inspection method: measure with steel ruler and vernier caliper.
For the pipe spool fabrication line belonging to one of the following conditions, sampling shall be conducted by the supervision engineer, and the inspection and re-inspection shall be carried out by a qualified inspection unit. The re-inspection results shall meet the current national product standards and design requirements.
Wincoo Engineering Co., Ltd (WINCOO) is committed to providing customers, manufacturers, EPC/C companies with the most suitable pipeline construction equipment solutions, involving pipeline manufacturing, storage tank construction, pipeline construction, industrial production lines, clean energy projects and Other industrial fields.
Here is the content list:
l What are the advantages of the working principle of pipeline construction equipment?
l What are the advantages of the basic structure of pipeline construction equipment?
l What are the advantages of pipeline construction equipment construction technology?
What are the advantages of the working principle of pipeline construction equipment?
Pipeline construction equipment adopts pipeline fixation, and the welding car travels to various positions to automatically perform pipeline welding. The welding process is efficient and low in cost.
The pipeline construction equipment includes the all-position automatic welding machine, which is composed of a welding control system, a welding trolley with a welding gun, a welding power source, a wire feeding device and accessories. The following specifically introduces the product parameters of pipeline construction equipment:
Applicable tube greater
Tube wall thickness
CS, SS, AS, low temperature steel (SS with special guide rail)
Suitable seam welded
pipe to pipe, pipe to elbow, pipe to flange
Stepper motor wheel and gear/worm drive
Buttons for increasing and decreasing speed
Our company's proprietary technology product,/rotary stepping motor
The company's proprietary technology product, digital tube
What are the advantages of the basic structure of pipeline construction equipment?
The pipeline construction equipment mainly consists of pipe fittings, valves, measuring instruments, supports and hangers, etc., which are connected with the gathering and transportation pipelines through production equipment to form the entire gathering and transportation system to complete the transportation of oilfield production media.
There are many types of pipe fittings used in pipeline construction equipment, mainly low-alloy steel, low-carbon steel, etc. According to the different pressures of gathering and transportation pipelines, they are divided into low-pressure, medium-pressure, and high-pressure pipelines. When selecting the material of the pipeline construction equipment, it must meet the design requirements, and no heavy skin shrinkage should occur. At the same time, the threads and grooves of the pipe fittings must meet the requirements of use during processing.
What are the advantages of pipeline construction equipment construction technology?
Under normal circumstances, groundwater or various sulfides will have a certain corrosive effect on pipeline construction equipment during operation. Therefore, to ensure the safety of pipeline construction equipment, it is necessary to strictly control the materials of gathering pipeline equipment. Corresponding anti-corrosion measures shall be taken in pipeline construction equipment according to the actual situation.
After our actual investigation of the ground and site soil conditions, we have correctly inferred the corrosivity, and formulated scientific and reasonable anti-corrosion measures based on the analysis results, and used the correct anti-corrosion technology. At present, the anti-corrosion material often used in pipeline construction equipment is asphalt. The application of asphalt in pipeline construction equipment anti-corrosion has the characteristics of low cost, good effect and large application area.
WINCOO has the ability to provide feasible pipeline construction equipment solutions to support customers in obtaining shorter project execution time, less man-hour costs, more efficient construction/manufacturing methods and higher quality in the project bidding phase.
According to the customer's facility/site space availability, we can research and provide matching configurations in terms of project schedule, quality, cost and productivity to ensure that the production schedule meets the project requirements. To support project execution, WINCOO is ready to work as a firefighter to quickly provide project materials from various consumables, tools, equipment/machines to special commodities. With flexibility, we are also very happy to act as a procurement agent for pipeline construction equipment in China to find the required supply resources.
When using the tank welding machine, the operator puts the lamp tube into the fixture, presses the start button, the two pressing cylinders descend to position the workpiece in the ultrasonic mold cavity, and then the ultrasonic welding head acts to trigger the ultrasonic wave, and the welding head carries out the workpiece. After welding and welding, the cylinder drives the upper die to reset, the pressing cylinder rises, and the operator takes out the workpiece to complete one operation.
What are the characteristics of automatic vertical welder?
What is the working principle of tank welding machine?
What is the working effect of tank welding machine?
Automatic vertical welder is high-efficiency automatic welding equipment that uses current feedback closed-loop control of vehicle lift. The thickness of the welded joint can be up to 50mm at one time. Mainly used for thick plate welding in petroleum, chemical, blast furnace, shipbuilding and other industries. EGW vertical gas electric welding machine is a kind of high-efficiency automatic welding equipment improved according to the current feedback closed-loop control welding trolley. The main feature of automatic vertical welder is that the thickness is from 10mm to 50mm in one pass of forced water cooling. At the same time, the molten pool level is automatically controlled, and the wire extension length is automatically adjusted. Small size and light weight welding trolley, flexible and modular, easy to update and easy to use. Widely used in petroleum, chemical, blast furnace thick plate welding and shipbuilding industries.
In most cases, the EGW used in the tank welding machine uses carbon dioxide gas as a protective gas, but sometimes pure argon, argon carbon dioxide mixed gas, argon oxygen mixed gas, and argon helium mixed gas are used. Welding wire is often made of flux wire that creates slag and provides an aesthetically pleasing weld, but sometimes solid wire is used.
Tank welding machine surrounds the molten pool with the base metal end and copper lining or refractory lining material, and can perform vertical upward welding while preventing dripping of molten metal, so it can be welded in a single pass (single operation) Welding of thick plates. Its applications include welding of vertical butt joints such as ship side outer panels, bridge construction, storage tanks, pressure vessels, etc.
Tank welding machine is usually used for welding thicker materials such as low carbon steel and medium carbon steel, and can also be used for welding austenitic stainless steel and other metal alloys. The thickness of the plate is 12~80mm the most suitable. If it is larger than 80mm, it is difficult to obtain a sufficient and good protective effect, resulting in pores in the weld, uneven penetration and incomplete penetration. The length of the welded joint is generally unlimited. Single-layer welding is the most commonly used welding method, but multi-layer welding can also be used.
Complete after-sales service, WINCOO ENGINEERING CO., LTD can provide online and offline technical support, not only video guidance, but also on-site guidance, want to know more about high efficiency pipeline construction equipment, horizontal pipeline construction equipment, stainless steel pressure vessel, etc.