Views: 0 Author: Site Editor Publish Time: 2022-05-13 Origin: Site
The hydraulic storage tank lifting equipment adopts the working principle of the straight top of the hydraulic oil cylinder, which can lift the lifting work table to a certain height and complete the transportation of the goods, which greatly saves manpower. The application range of hydraulic storage tank lifting equipment lift is very wide. Warehouse workshop, supermarket logistics station, and home can be installed and used, the safety factor of hydraulic storage tank lifting equipment lift is relatively high.
What should we pay attention to before using the hydraulic storage tank lifting equipment?
What should be paid attention to during the use of hydraulic storage tank lifting equipment?
What are the steps of using hydraulic storage tank lifting equipment?
1) Before use, it is necessary to check whether all parts of the hydraulic storage tank lifting equipment are normal, mainly check whether the piston, joints, high-pressure hoses, etc. leak oil.
2) The regulations in the main parameters should be strictly followed during use, and super high overload should be avoided, otherwise, when the lifting height or lifting tonnage exceeds the regulations, serious oil leakage will occur at the top of the hydraulic cylinder.
3) If the oil in the manual hydraulic pump is insufficient, it is necessary to add fully filtered hydraulic oil to the pump before it can work.
1) The choice of the center of gravity of the heavy object should be moderate, the focus point of the hydraulic storage tank lifting equipment should be selected reasonably, and the bottom surface should be flat. At the same time, the soft and hard conditions of the ground should be considered, whether it should be lined with tough wood, and whether the placement should be stable, so as to prevent the load from sinking. or inclined.
2) After the hydraulic storage tank lifting equipment lifts the heavy object, the support should be used to support the heavy object in time.
3) If several hydraulic storage tank lifting equipment need to be lifted at the same time, in addition to the correct placement of the jacks, attention should be paid to the balanced load of each hydraulic storage tank lifting equipment, and attention should be paid to keep the lifting speed synchronized to prevent the objects being lifted from tilting danger occurs.
1) When using the hydraulic storage tank lifting equipment, first place the hydraulic cylinder, and then tighten the oil drain screw on the hydraulic pump to work. To make the piston rod descend, loosen the handwheel of the manual hydraulic pump in a counterclockwise direction slightly, the hydraulic cylinder is unloaded, and the piston rod gradually descends. Otherwise, it will be dangerous to descend too fast.
2) The detached hydraulic storage tank lifting equipment adopts a spring reset structure. After lifting, it can be quickly taken out, but the connected hose cannot be used to pull the jack.
3) Due to the small lifting stroke of the jack, the rated stroke should not be exceeded during use to avoid damage to the jack.
4) The violent vibration of the hydraulic storage tank lifting equipment should be avoided during use (such as hitting the workpiece with a hammer when the hydraulic storage tank lifting equipment is loaded).
For many years, WINCOO ENGINEERING CO., LTDhas been a trustworthy supplier in the hydraulic storage tank lifting equipment area. If you choose this company, you will get the best quality products and the most intimate after-sales service.