Views: 0 Author: Site Editor Publish Time: 2022-05-10 Origin: Site
The hydraulic storage tank lifting equipment has a slow lifting speed but is safe and durable, and its carrying capacity is also very amazing. It is the choice of many businesses.
What is the function of hydraulic storage tank lifting equipment?
Why can't the hydraulic storage tank lifting equipment lift?
What are the contraindications to the use of hydraulic storage tank lifting equipment?
T series hydraulic storage tank lifting equipment is large-scale equipment specially developed for the national petroleum reserve project, which is suitable for the inverted welding process engineering of steel giant silos. This type of device is a two-stage single-acting hydraulic cylinder (hydraulic jack) for VTOL workforce or needs to be returned from the back position, it cannot be used for horizontal work. The device is compact in structure, safe and stable, easy to operate, adjustable in load, quick in installation and high in synchronization accuracy. YT series hydraulic storage tank lifting equipment is a "drag five" oil supply method: each pump station is connected to 5 hydraulic cylinders; thus, avoiding the disadvantages of excessive oil pipes and many leakage points caused by traditional centralized oil pipes, and ensuring that environmental pollution is minimized.
There is no oil inside, the small pump gasket cannot move against the steel ball or there are impurities or damage in the recess of the steel ball.
1. Observe whether there is oil in the hydraulic storage tank lifting equipment, and refuel without oil.
2. Clamp the hydraulic storage tank lifting equipment on the vise, remove the handle connecting rod on the small pump, tighten the oil drain valve, and release the air from the oil filling port, loosen the small pump counterclockwise with the afterburner lever of the plum wrench. Use needle nose pliers to pry out the gasket, take out the steel ball, clean the recess, put in the gasket, observe whether there is room for the steel ball to move, and then install it back into the small pump and tighten it.
(1) No overload, super high. When a red line appears on the sleeve, it indicates that the hydraulic storage tank lifting equipment has reached the rated height and should stop lifting.
(2) When several hydraulic storage tank lifting equipment are working at the same time, there must be a special person instructing them to make the lifting or lowering synchronously. Wooden blocks should be supported between two adjacent hydraulic jacks to ensure the interval and prevent sliding.
(3) When using the hydraulic storage tank lifting equipment, always pay attention to the sealing part and the pipe joint part, and it must be safe and reliable.
(4) hydraulic storage tank lifting equipment is not suitable for places with acid, alkali or corrosive gas.
Our company has a skilled team that can customize exclusive products for you according to the different needs of customers. If you are interested in this product and want to know more about it, please contact WINCOO ENGINEERING CO., LTD.