Tank lifting equipment- Factory Manufacturers Suppliers From China

Simple chuck type hydraulic Jack is a double acting hydraulic jack (also known as hydraulic lifting machine) with upper and lower clamping heads divided into two bodies. It is suitable for lifting construction of various large storage tanks (steel) or other heavy objects. It needs to cooperate with the lifting rod to achieve reciprocating lifting work.

• What do you know about simple chunk type hydraulic jack?

• What is the working principle of the simple chunk type hydraulic jack?

• What are the characteristics of simple chunk type hydraulic jack?

What do you know about simple chunk type hydraulic jack?

The simple chunk type hydraulic jack comprises an oil cylinder and a piston, the upper and lower ends of the oil cylinder are respectively provided with an upper cylinder head and a lower cylinder head, and the upper cylinder head and the lower cylinder head are respectively provided with an oil inlet and outlet hole; The piston is arranged in the middle of the piston rod, the both ends of the piston rod respectively extend out of the upper cylinder head and the lower cylinder head, the piston rod is hollow, and the lifting rod axial through the piston rod, the lifting rod on the upper side and the lower side of the piston rod are respectively provided with a locking device; The locking device comprises a gripping part set on the lifting rod, the gripping part is provided with a large and small conical hole, the inner side of the conical hole is circumferentially provided with a number of wedge blocks; The outer surface of the wedge block is compatible with the conical hole, the inner side of the wedge block is provided with a clamping tooth, the clamping tooth is held on the lifting rod, the wedge block is provided with a circular spring chuck; The spring chuck is provided with a plurality of round holes, a round hole is provided with a reset spring, the upper side of the spring chuck is provided with an annular cover fixed with the grip part, and the both ends of the reset spring are respectively conflicted between the lower end face of the wedge block and the cover; The grip part on the upper side of the locking device is relatively fixed with the upper end of the piston rod, and the grip part on the lower side of the locking device is relatively fixed with the lower cylinder head by the support.

What is the working principle of the simple chunk type hydraulic jack?

Simple chunk type hydraulic jack (package unit) is evenly distributed around tank inner wall. Tank top and upper (the first layer) wall plates are lifted first and then install and weld wall plates of tank body. Self locking hydraulic jack and hydraulic hoist composing of lifting frame and lifting rod are adopted. When oil enters hydraulic jack, upper clamp fastens and lifts lifting rod and expansion ring and mobilize tank (including tank top) to ascend upward. When oil returns to jack, upper clamp returns with piston and lower clamp automatically fastens lifting rod without gliding. The simple chunk type hydraulic jack repeats the movement and make lifting rod ascend with tank to designated height (spare height for next layer of plate). After butt weld of next layer of wall plates, open upper and lower loosening device and loosen upper and lower clamp to make lifting rod and expansion ring descend to lower expanded and welded rib plate of the next layer of wall plates and then lift. Repeat the process and ascend welded tan till the last layer of wall plates are installed and welded. The installation of the whole storage tank is completed.

What are the characteristics of simple chunk type hydraulic jack?

1, Simple chunk type hydraulic jack adopts low relaxation steel strand, as long as there is a reasonable bearing lifting point, lifting height is not restricted;

2, Through the expansion and combination of simple chunk type hydraulic jack, the lifting weight, span and area are unlimited;

3, Small volume, light weight, large bearing capacity, convenient and flexible installation, especially suitable for small space or indoor large tonnage tank lifting;

4, The simple chunk type hydraulic jack has reverse motion self-locking, which makes the lifting process very convenient, and the storage tank can be locked reliably at any position in the lifting process for a long time;

5, The simple chunk type hydraulic jack has a high degree of automation, convenient and flexible operation, with automatic operation, semi-automatic operation, single point adjustment, manual operation and other operations. LCD display, touch screen display, button operation panel display, very intuitive. And the control system is equipped with self-correction protection procedures, even if the misoperation will not cause accidents;

6, Using this series of simple chunk type hydraulic jack, the construction period is short, the cost is low, the economic benefit is good.

Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipment for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction, industrial production lines, clean energy project and other industrial field.

Wincoo Engineering Co., Ltd (WINCOO) is committed to providing customers, manufacturers, EPC/C companies with the most suitable pipeline construction equipment solutions, involving pipeline manufacturing, storage tank construction, pipeline construction, industrial production lines, clean energy projects and Other industrial fields.

Here is the content list:

l What are the advantages of the working principle of pipeline construction equipment?

l What are the advantages of the basic structure of pipeline construction equipment?

l What are the advantages of pipeline construction equipment construction technology?

What are the advantages of the working principle of pipeline construction equipment?

Pipeline construction equipment adopts pipeline fixation, and the welding car travels to various positions to automatically perform pipeline welding. The welding process is efficient and low in cost.

The pipeline construction equipment includes the all-position automatic welding machine, which is composed of a welding control system, a welding trolley with a welding gun, a welding power source, a wire feeding device and accessories. The following specifically introduces the product parameters of pipeline construction equipment:

What are the advantages of the basic structure of pipeline construction equipment?

The pipeline construction equipment mainly consists of pipe fittings, valves, measuring instruments, supports and hangers, etc., which are connected with the gathering and transportation pipelines through production equipment to form the entire gathering and transportation system to complete the transportation of oilfield production media.

There are many types of pipe fittings used in pipeline construction equipment, mainly low-alloy steel, low-carbon steel, etc. According to the different pressures of gathering and transportation pipelines, they are divided into low-pressure, medium-pressure, and high-pressure pipelines. When selecting the material of the pipeline construction equipment, it must meet the design requirements, and no heavy skin shrinkage should occur. At the same time, the threads and grooves of the pipe fittings must meet the requirements of use during processing.

What are the advantages of pipeline construction equipment construction technology?

Under normal circumstances, groundwater or various sulfides will have a certain corrosive effect on pipeline construction equipment during operation. Therefore, to ensure the safety of pipeline construction equipment, it is necessary to strictly control the materials of gathering pipeline equipment. Corresponding anti-corrosion measures shall be taken in pipeline construction equipment according to the actual situation.

After our actual investigation of the ground and site soil conditions, we have correctly inferred the corrosivity, and formulated scientific and reasonable anti-corrosion measures based on the analysis results, and used the correct anti-corrosion technology. At present, the anti-corrosion material often used in pipeline construction equipment is asphalt. The application of asphalt in pipeline construction equipment anti-corrosion has the characteristics of low cost, good effect and large application area.

WINCOO has the ability to provide feasible pipeline construction equipment solutions to support customers in obtaining shorter project execution time, less man-hour costs, more efficient construction/manufacturing methods and higher quality in the project bidding phase.

According to the customer's facility/site space availability, we can research and provide matching configurations in terms of project schedule, quality, cost and productivity to ensure that the production schedule meets the project requirements. To support project execution, WINCOO is ready to work as a firefighter to quickly provide project materials from various consumables, tools, equipment/machines to special commodities. With flexibility, we are also very happy to act as a procurement agent for pipeline construction equipment in China to find the required supply resources.

The tank welding machine can automatically and continuously weld the front and back of the cell according to the specified requirements. The welding band is fed and cut automatically during welding, and the battery string is received automatically after welding is completed. Welding processes include infrared lamp welding and electromagnetic high frequency induction welding.

What are the characteristics of tank welding machine?

What are the working characteristics of the tank welding machine?

What is the workflow of the tank welding machine?

What are the characteristics of tank welding machine?

In contrast to the current round welding machines on the market, the tank welding machine of the MSHW series offered by WINCOO Engineering is equipped with a dual drive system as standard. This self-propelled submerged welding system can reduce tank welding time on site by 40%. Welding errors are greatly reduced, saving tank installation costs. The circumferential welding machine is suitable for top-down or bottom-up constructions of single- or double-wall storage tanks for internal and external welding. There are four standard units, but our design allows us to offer custom mounting units for non-standard applications.

What are the working characteristics of the tank welding machine?

The tank welding machine belongs to fusion welding, in which a laser beam is used as energy to act on welds.

The laser beam of the tank welding machine can be guided through a flat optical element (such as a mirror), and then the beam is projected onto the weld by a reflective focusing element or mirror.

Tank welding machine is a non-contact welding process that does not need to be pressurized during operation, but an inert gas is required to prevent oxidation of the melting pool, and occasionally filler metal is used.

The tank welding machine can be combined with MIG welding to form laser MIG composite welding to achieve large-impact welding, and the heat supply is greatly reduced compared to MIG welding.

What is the workflow of the tank welding machine?

The circumferential welding equipment is a tank welding machine. The most important welding parameters in circular welding include welding current, welding torch speed, inert gas flow, etc. At the same time, the clearance fit of welded joints also plays a decisive role. Under the existing conditions, pipe ends are machined before welding lathes and repaired by fitters. In this case, the dimensional accuracy of the short ends is difficult to meet the requirements of the drawings, resulting in uneven fit gaps between the pipe ends and pipe connections; In addition, if the pipeline is displaced during staple welding, this will cause uneven spacing of the fitting surface, so that the surface of the weld is pressed in after circumferential welding. During the welding process of tank welding machine, the inside of the pipe is protected by argon gas. If there is no argon gas protection in the line, the back of the weld will be poorly formed and at the same time oxidation will occur.

Based on the availability of the customer's plant/site, WINCOO ENGINEERING CO., LTD is able to study/design and present coordinated configurations on project plan, quality, cost and productivity to ensure production pace meets project requirements.

The hydraulic storage tank lifting equipment adopts the working principle of the straight top of the hydraulic oil cylinder, which can lift the lifting work table to a certain height and complete the transportation of the goods, which greatly saves manpower. The application range of hydraulic storage tank lifting equipment lift is very wide. Warehouse workshop, supermarket logistics station, and home can be installed and used, the safety factor of hydraulic storage tank lifting equipment lift is relatively high.

What should we pay attention to before using the hydraulic storage tank lifting equipment?

What should be paid attention to during the use of hydraulic storage tank lifting equipment?

What are the steps of using hydraulic storage tank lifting equipment?

What should we pay attention to before using the hydraulic storage tank lifting equipment?

1) Before use, it is necessary to check whether all parts of the hydraulic storage tank lifting equipment are normal, mainly check whether the piston, joints, high-pressure hoses, etc. leak oil.

2) The regulations in the main parameters should be strictly followed during use, and super high overload should be avoided, otherwise, when the lifting height or lifting tonnage exceeds the regulations, serious oil leakage will occur at the top of the hydraulic cylinder.

3) If the oil in the manual hydraulic pump is insufficient, it is necessary to add fully filtered hydraulic oil to the pump before it can work.

What should be paid attention to during the use of hydraulic storage tank lifting equipment?

1) The choice of the center of gravity of the heavy object should be moderate, the focus point of the hydraulic storage tank lifting equipment should be selected reasonably, and the bottom surface should be flat. At the same time, the soft and hard conditions of the ground should be considered, whether it should be lined with tough wood, and whether the placement should be stable, so as to prevent the load from sinking. or inclined.

2) After the hydraulic storage tank lifting equipment lifts the heavy object, the support should be used to support the heavy object in time.

3) If several hydraulic storage tank lifting equipment need to be lifted at the same time, in addition to the correct placement of the jacks, attention should be paid to the balanced load of each hydraulic storage tank lifting equipment, and attention should be paid to keep the lifting speed synchronized to prevent the objects being lifted from tilting danger occurs.

What are the steps of using hydraulic storage tank lifting equipment?

1) When using the hydraulic storage tank lifting equipment, first place the hydraulic cylinder, and then tighten the oil drain screw on the hydraulic pump to work. To make the piston rod descend, loosen the handwheel of the manual hydraulic pump in a counterclockwise direction slightly, the hydraulic cylinder is unloaded, and the piston rod gradually descends. Otherwise, it will be dangerous to descend too fast.

2) The detached hydraulic storage tank lifting equipment adopts a spring reset structure. After lifting, it can be quickly taken out, but the connected hose cannot be used to pull the jack.

3) Due to the small lifting stroke of the jack, the rated stroke should not be exceeded during use to avoid damage to the jack.

4) The violent vibration of the hydraulic storage tank lifting equipment should be avoided during use (such as hitting the workpiece with a hammer when the hydraulic storage tank lifting equipment is loaded).

For many years, WINCOO ENGINEERING CO., LTDhas been a trustworthy supplier in the hydraulic storage tank lifting equipment area. If you choose this company, you will get the best quality products and the most intimate after-sales service.

The tank welding machine uses electrical energy to instantly convert electrical energy into heat. The tank welding machine is suitable for working in a dry environment without too many requirements. Because of its compact size, simple operation, convenient use and fast speed. Next, we will introduce the precautions of tank welding machine.

Here is the content list:

Introduction to the advantages and disadvantages of tank welding machine.

Matters needing attention when cleaning tank welding machine.

How to use a tank welding machine?

Introduction to the advantages and disadvantages of tank welding machine.

The advantages of tank welding machine after welding are widely used in various fields, especially for parts that require high strength. It can instantly connect the same metal material (also can connect dissimilar metals, but the welding method is different) permanently. After heat treatment, the weld seam has the same strength as the base material and is well sealed, which solves the problems of sealing and strength for the manufacture of storage gas and liquid containers.

However, when the tank welding machine is in use, a certain magnetic field will be generated around the welding machine. When the arc burns, radiation will be generated to the surroundings. The arc light contains infrared rays, ultraviolet rays and other light species, as well as metal vapor and smoke and other harmful substances. Adequate protective measures must be done at the time.

Welding is not suitable for high-carbon steel welding. Due to the process of crystallization, segregation and oxidation of weld metal, the welding performance of high-carbon steel is poor, and it is easy to crack after welding, resulting in hot and cold cracks. Low carbon steel has good welding performance, but the process must be handled properly. Derusting and cleaning are more cumbersome. Sometimes the weld will have defects such as slag inclusion, cracks, pores and undercuts, but proper operation will reduce the occurrence of defects.

Matters needing attention when cleaning tank welding machine.

When cleaning the tank welding machine, it is necessary to grind the inner and outer burrs of the tube end to make the tube end flush without burrs, and wipe it clean with alcohol. Manual tungsten argon arc welding is used for positioning, and the location of the positioning solder joints should not be too high, the current should not be too large, and the penetration is not allowed, the number of solder joints should not be less than 2, and the solder joint diameter should not be greater than 6mm.

If the position of the tank welding machine is not used properly, the position of the welding point will deviate from the neutral line of the welding butt surface. Due to the regular shape of the girth welding seam, the position welding point that deviates from the welding seam cannot be covered by the normal welding seam, resulting in The positioning welding spot is on the edge and outside of the welding seam, which makes the welding seam surface poorly formed.

How to use a tank welding machine?

l Check the connection

After completing the wiring of the tank welding machine, you must check each installed connector to confirm that it is well connected before starting to operate the equipment. Its contents include:

1. The line connection is correct and reasonable, and the grounding must meet the specified requirements

2. The magnetic work piece gripper shall not have attached metal particles and splashes on its contact surface;

3. The coiled welding cable should be unrolled before use to avoid overheating and insulation damage;

4. When it is necessary to alternately use different lengths of cables, insulating joints should be provided to ensure that useless lengths can be disconnected when not needed.

l leakage

There must not be any leakage of cooling water, shielding gas or engine oil that affects the safety of welders.

l Work suspension

When the welding work is suspended (for example, during breaks), the output terminal of the equipment or tank welding machine must be turned off or the power supply must be cut off.

l Mobile welding machine

When you need to move the tank welding machine, you must first cut off the power supply at its input end.

l Equipment not used

The metal electrode and carbon electrode must be removed from the welding tongs when not in use to eliminate the risk of electric shock to personnel or conductive objects. The welding tongs must be placed out of contact with persons, electrical conductors, flammable objects or compressed air bottles when not in use. The welding torch of the semi-automatic welding machine must be properly placed when not in use to avoid accidental activation of the gun body switch.

l maintain

All arc welding equipment must be maintained at any time and kept in a safe worki.