The pipe spool fabrication line has unique structure, high degree of automation, convenient operation, stable and reliable continuous production. The pipes produced by this pipe spool fabrication line have moderate rigidity, strength, good flexibility, creep resistance, environmental stress cracking resistance and good thermal welding performance, and have become the first choice for urban gas pipelines and outdoor water supply pipes. However, there are still some problems when using the pipe spool fabrication line.
Here is the content list:
l Failure of the production line and corresponding measures.
l Computer system failure and corresponding measures.
l Pipe spool fabrication line failure and corresponding measures.
l The outer surface of the pipe spool fabrication line is rough
① Adjust the pipe spool fabrication line of process temperature: reduce the cooling water temperature, the best cooling water temperature of the PE pipe is 20~25℃
② Check whether the waterway is blocked or the water pressure is insufficient;
③ Check whether the heating ring of the barrel, head, etc. is damaged;
④ Adjust the water flow of the sizing sleeve;
⑤ Please consult the raw material supplier for the raw material parameters of the batch;
⑥ Check the mold core temperature, if it is higher than the die temperature, reduce the mold core temperature;
⑦ Clean the mold;
l Grooves appear on the outer surface of the plastic pipe
① Adjust the water outlet pressure of the sizing sleeve, and balance the water output;
② Adjust the nozzle angle in the vacuum forming box to evenly cool the pipeline;
③ Check the mold, sizing sleeve, cutting machine and other hardware for debris and burrs;
l There is a jitter ring inside the pipe spool fabrication line
① Adjust the water outlet of the sizing sleeve to make it even.
② Adjust the vacuum degree of the second chamber so that the vacuum degree of the rear chamber is slightly higher than that of the front chamber;
③ Check whether the vacuum seal is too tight;
④ Check whether the tractor is shaking;
⑤ Check whether the host output is even;
l The outer diameter of the pipe spool fabrication line is out of tolerance
① Adjust the vacuum to change the size of the outer circle;
② Adjust the traction speed to change the outer ring size;
③ Correct the size of the inner hole of the sizing sleeve;
l Uneven wall thickness of pipe spool fabrication line
① Adjust the wall thickness of the mold; adjust the nozzle angle in the vacuum setting machine and spray box to uniformly cool the pipeline.
② Adjust the water outlet of the sizing sleeve to make it even.
③ Disassemble the mold, check whether the screws in the mold are loose, and then tighten it again;
Computer system failure
When the computer is turned on or running, pipe spool fabrication line is not allowed to enter the test state.
l Problem 1: The tensile strength and toughness are poor. The tensile strength curve of pipe spool fabrication line should have obvious yield strength and greater elongation, while poor plastic pipes are usually fragile, low elongation and easy to break.
l Problem 2: Poor impact resistance. According to the GB/T5836.1-92 standard, the drop hammer impact test was tested. After years of testing, it was found that the pass rate was only less than 50%, and many pipe spool fabrication line were even damaged by 10 times.
l Problem 3: The softening temperature is low and it is easy to deform after being heated. It is shown in the test performance, that is, the Vicat softening temperature is relatively low (less than 79). Some manufacturers only increase the amount of filler during the compounding process to increase the softening temperature.
This can indeed increase the softening temperature, but will greatly reduce the other properties of the pipe, especially impact resistance, tensile strength and toughness. Therefore, in order to increase the softening temperature without reducing or seldom reducing other properties, attention must be paid to the selection of additives, the ratio of raw materials, the production process and the production machinery, Can not be taken lightly.
Pipe spool fabrication line is tested in accordance with the national standard GB/T10002.1-1996, and its hydraulic inspection performance standard value requirements are relatively high, which puts forward high requirements for enterprises that produce pipe spool fabrication line. The eccentricity problem is one of the common plastic pipe problems, which will result in large uneven wall thickness of the produced plastic pipes, which not only causes waste of raw materials, but also makes it difficult for the water pressure test performance to meet the requirements.
The operation of the pipe spool fabrication line has a great impact. Therefore, this requires manufacturers not only to match the materials well, but also to install online testing equipment so that qualified companies can adjust the size deviation of the plastic pipe at any time.
1. Adjust the operating vehicle
According to the width of the steel plate, adjust the height of the operating vehicle, so that the distance between the bottom edge of the wheel and the upper surface of the tray can reach the width of the steel plate. At this time, the upper limit of the tray is adjusted in the middle position, and the beam of the tray can also be adjusted accordingly in the construction according to the situation.After adjusting the operation car, be sure to insert the puncture pin of the column and tighten the screws to ensure the smooth operation of the car during walking
2. Power access
Make sure there is no short circuit in the operation car, place the welding power switch in the correct position of automatic welding, turn on the power, and close the main switch of the welding power supply.And test and debug the system is normal operation.
3. Clean the groove
The Angle grinder is used to clean up the oil and rust in the groove, remove burrs, splashes and solder spots on the groove surface. The lower vertical joints of the steel plate are ground to 100mm, and the contact points between the upper vertical joints and the transverse joints are handled well to make the bottom of the groove smooth and smooth, so as not to hinder the movement of the pallet along the steel plate.
4. Install the welding wire
Put the wire into the wire tray for fastening, and then cut off part of the bundled string.
A hose should be added between the welding wire plate and the welding gun to avoid electric leakage between the welding wire and the body.The pressing force of the straightening wheel should be small to avoid bending of the welding wire caused by excessive pressure.After the welding wire is inserted into the gun barrel, close the wire feeding pressing wheel and press the "wire feeding" button to send the welding wire out of the conductive nozzle for a length. At this time, all the binding ropes are cut open.The pressing degree of the pressing wheel should be appropriate. If it is too loose, it will cause the wire to slip. If it is too tight, it will cause the wire indentation to be too large, and the resistance will increase, leading to the instability of the welding arc.When the conductive tip is worn too much, it must be replaced in time, otherwise the conduction is not reliable, and it is easy to cause the welding arc instability.
5. Filling flux
The flux shall be dried with a special drying box, and the heating temperature shall be as per the requirements of the flux. After heating, the flux shall be kept warm to about 50℃.When the flux temperature is too high, it can not be loaded into the flux box, so as not to burn the flux pipe.Pay attention to clean the dust on the filter cover in the flux box to ensure the suction of recovery.
6. Adjust the torch
Adjust the position and Angle of the welding torch so that it is in the center of the supporting belt.Operator requires that the stretching length of the wire is 20-30mm, that is, the distance between the conductive tip of the welding gun and the steel plate. The Angle of the welding gun is generally about 25 degrees.
7. Adjust the flux transport and recovery system
Adjust and operate the roof wheel, so that the tray is separated from the steel plate. Adjust the supporting belt on the tray to about 15-20mm below the groove, and then remove the roof wheel from the steel plate, so that the supporting belt contacts the tank wall, and test the operation for about 1M to check whether it is in normal operation.Adjust the relative position of the conveying port and the welding gun to ensure that the welding flux can fully protect the welding point;Adjust the position of the recovery port to ensure that all unreacted flux can be recovered to the flux tray.
8. Check whether the welding power switch is correct, whether the ground wire contacts and conducts well, check whether the switch behind the operation box is in the "automatic" position, and close the welding power switch.
9. Adjust the wire does not contact the steel plate, open the wire feed pressing wheel, press the "start" button of welding, at this time the voltmeter is displayed, adjust the voltage to 35V, and adjust the current to make the wire feed wheel speed is appropriate, press the "stop" button.(This work is mainly to ensure that the arc is easy to start after welding, the welding current and arc voltage are stable and the arc is normal.)
Gantry welding machine is mainly used for submerged arc welding of H-beam, with high degree of welding automation, simple and convenient operation; the welding head has functions such as vertical lift and angle adjustment. In order to meet the needs of different welding workpieces, the flux is fed by gravity and recovered by a negative pressure vacuum machine; the two welding heads can be welded simultaneously or individually.
What are the structural characteristics of gantry welding machine?
What are the product feathers of gantry welding machine?
What are the advantages of gantry welding machine?
Gantry welding machines are used for assembly, welding and straightening of H-beams or T-beams. Concentrate assembly, welding, straightening functions on one machine, saving space and saving workshop. Reduced Workflow: Reduce production time and increase efficiency. Save investment in crane equipment and operators.
These gantry welding machines are specially designed for the manufacture of welded "T" and double "T" beams, therefore with parallel or converging flanges. They can be welded on items whose webs are placed vertically without any positioning. Positioning only needs to be at the top to get the proper angle between the web and flange. When making a double "T" beam, once the first flange is welded, the beam flips and feeds back into the element again. Effectively save working time
In addition, the gantry welding machine is capable of welding both symmetrical and asymmetrical beams without the need for positioning; a post-flange deformation device installed at the exit of the machine enables the machine to compensate for any flange deformation that occurs during welding. The unit is easily adjustable to handle a wide range of flange sizes and various deformable thicknesses up to a width of 40mm. The welding line can be equipped with Mitsubishi control PLC.
1. Beam Welding Line" automatic, two heads submerged arc-welding lines for T / I girder beam;
2. Two sets of American Lincon DC-1000, NA-3S SAW welding system to ensure good welding quality;
3. Japan Mitsubishi PLC controller;
4. Hydraulic type post deformation device to straighten the beam;
5. The beam is fed into the machine and both sides of the beam are welded simultaneously;
6. Save space and economize workshop; shorten the production time and improve the efficiency;
7. Economize the investment of crane equipment and operator.
Gantry welding machine can dynamically track the welding seam, realize bidirectional reciprocating welding, ensure the welding seam quality and improve production efficiency.
The automatic flux feeding and recycling device of gantry welding machine can reduce flux loss, reduce labor intensity of workers and improve production efficiency.
The welding power source and the main engine of gantry welding machine are controlled centrally, and the linkage operation is simple and convenient.
The welding travel motor of gantry welding machine adopts AC frequency conversion speed regulation, which can realize stepless adjustment.
The welding process of gantry welding machine can be single wire single arc, double wire single arc or double wire double arc according to the requirements.
To support project execution, we are always ready to work as firemen to give prompt supply on project materials from different consumables, tools, equipment/machines to special merchandise. With flexibility, WINCOO ENGINEERING CO., LTD is also glad to perform as procurement agent in China to seek required supply resources.
Tank welding machine is the process of joining metal parts using various fusible alloys. The melting point of the solder is lower than that of the material to be soldered, so that the part will end the soldering through inter molecular contact on its surface without being melted.
Here is the content list:
l What is the working principle of tank welding machines?
l What is the purpose of using tank welding machines?
l What are the application significance of tank welding machines?
What is the working principle of tank welding machines?
Tank welding machines can be divided into soft welding and hard welding. The temperature of soft welding is lower than 450℃, and the temperature of hard welding is higher than 450℃. Hard welding is usually used for metals such as silver, gold, steel, copper, and its welding point is much stronger than soft welding, and its shear strength is 20 to 30 times that of soft welding. The above two types of thermal connections usually use the term soldering, because in both cases molten solder is written into two elongated gaps between the clean and close solid metal surfaces of the device.
Tank welding machines ensure the continuity of the metal. On the one hand, two metals are connected by bolts or physical attachments to each other, showing a strong metal whole, but this connection is not continuous. Sometimes if there is an oxide insulating film on the metal surface, they may even Right or wrong physical contact.Another disadvantage of mechanical connection compared with welding is that the contact surface continues to oxidize, resulting in an increase in resistance. In addition, vibrations and other mechanical shocks can also loosen the joint. Welding eliminates these problems. The tank welding machines do not move relative to each other, the contact surface will not be oxidized, and the continuous conduction method can be maintained.
What is the purpose of using tank welding machines?
Tank welding machines welding is a process of fusion between two metals, mainly for the purpose of dissolving some of the metal in contact with the solder in the molten state, and the surface of the metal being welded often has a thin oxide film that cannot be dissolved by the solder. The flux is used to remove this oxide film. The tank welding machines welding process usually includes:
l 1) Melting of the flux to remove the oxide film on the surface of the welded metal;
l 2) Melting the solder makes the impure substances and lighter flux suspended in it float to the surface;
l 3) Some dissolve some metal connected with solder;
l 4) Cool and end the melting of metal and solder.
Through temperature changes, humidity, vibration, etc., even a bad solder joint can cause some or all of the system to lose control. There are countless welding points in the equipment, and the reliability of these welding points should even be higher than the equipment itself.
For the purpose of using tank welding machines, research in this area has led to the addition of knowledge of materials and their properties, and many developments have been made in the possible welding processes. Welding technology is an accompanying technology.
With the development of the electronics industry, more useful packaging technologies and smaller components will certainly continue to emerge. Welding technology will also continue to be developed to meet the needs of the electronics industry and environmental issues. This is why welding is becoming more and more professional for technology professors who work in the electronics industry today!
What are the application significance of tank welding machines?
The auxiliary equipment of the tank welding machines includes gas welding glasses to prevent the operator from being damaged by the ultraviolet, infrared or other rays generated by the welding arc or other welding energy, the mask to protect the eyes, face and neck of the welder during arc welding, white work clothes, welder gloves and protective guards.
l Energy efficient.
The energy saving of the electric welding machine is embodied in two aspects: energy saving at no load and energy saving at load. According to relevant statistics, in 2008, the demand for tank welding machines in the domestic welding industry was 890,000 units. If all electric welding machines are used, it can directly save 43,000 tons of copper, 64,000 tons of steel, and save 680 million KW.H of electricity. It saved 566,500 tons of coal, 10.34 million tons of water, and reduced 1,144,500 tons of CO2 emissions. It can be seen that vigorously promoting tank welding machines has huge economic and social benefits.
l Stable performance
Since the working frequency of the tank welding machines is above 20KHZ, it has a faster response speed, and the droplet transfer can be subdivided into multiple stages for control. For CO2 gas shielded welding, spatter can be greatly reduced. For pulsed melting pole MIG/MAG welding, the stability of jet transition can be effectively controlled, and the droplet transition and the movement of the wire feeding mechanism can be combined to further control the melting. During the dripping transition process, a good weld formation is obtained and the welding performance is stable. These are things that traditional rectifier welding machines cannot do.
l Centralized control
The tank welding machines uses a large number of digital controllers such as single-chip microcomputer, DSP, FPGA, etc., and realizes the network communication between multiple welding machines or the upper computer and the welding machine through Ethernet and field bus. It not only solves the problem of coordinated operation of multiple welding machines, and facilitates centralized control in the welding process, but also realizes the setting or monitoring of remote welding machine parameters, making remote fault diagnosis and maintenance of tank welding machines possible.