Pipe spool fabrication line is mainly suitable for industrial pipelines. It is widely used in food pipelines, beverage factories, wineries, natural gas, sewage treatment pipes, petroleum, ventilation pipes, construction, bridges, aviation and many other industries. It can be seen that pipe spool fabrication line has many irreplaceable advantages!
Here is the content list:
l What are the performance characteristics and advantages of pipe spool fabrication line?
l What are the functional advantages of pipe spool fabrication line?
l What are the outstanding advantages of the pipe spool fabrication line provided by WINCOO?
What are the performance characteristics and advantages of pipe spool fabrication line?
There are two methods for manufacturing pipe spool fabrication lines, one is "less welding" and the other is "welding". The raw materials of pipe spool fabrication line are pipes, pipe fittings, flanges and forgings. There are various demands such as carbon steel, stainless steel and alloy steel.
The solution of pipe spool fabrication line requires strict quality parameters, from raw materials to final welding quality and size. Usually the drawings are provided by the customer, which can be used for manufacturing or copied into suitable manufacturing drawings.
l Achieve 80% automated manufacturing rate
l Equipped with a short-tube lean manufacturing software management system to achieve a productivity of 0.25manhour/DI
l Reduce customer's manufacturing costs
l Guarantee customer's processing quality
l Enhance customer competitiveness
What are the functional advantages of pipe spool fabrication line?
Pipe spool fabrication line can save manufacturing, inspection and testing costs. It is widely used in chemical, pharmaceutical, winery, petroleum, food, automobile, paper, air-conditioning and other industries.
① By using prefabricated spools, it is easier to manage quality, accuracy and tolerances compared to on-site.
② The pipe spool fabrication line can minimize production delays.
③ By using the pipe spool fabrication line, the problem of insufficient manpower can be overcome to a certain extent.
④ The pipe spool fabrication line will reduce assembly time, thereby ensuring a reduction in project cost and time.
⑤ Users of pipe spool fabrication line have almost no investment in manufacturing and testing equipment.
⑥ Radiographic testing, PMI, MPI, ultrasonic testing, hydraulic testing, etc.
⑦ Manufacture and processing under the strict supervision of third-party inspectors.
⑧ The pipe spool fabrication line avoids on-site rework, avoids power dependence, time delay and ensures
⑨ Better security.
What are the outstanding advantages of the pipe spool fabrication line provided by WINCOO?
Any pipe spool fabrication line can allocate several efficient and reliable welding processes to ensure welding quality. Generally, WINCOO can provide customers with a variety of welding processes and related automatic and mechanical welding equipment.
l Using CNC equipment parts processing, high product precision
l The machine is sturdy and durable, with low maintenance probability
l Using Siemens motor, Pearl River reducer and other brand accessories, high performance;
l Fully automated, simple operation, continuous production, high efficiency;
l The pipe production speed is 15% faster than the peers, and the output is high;
l The production cost is low, the material waste is less, and the pipe yield rate can reach more than 98%;
l We have professional designers and planners to customize different solutions for each of our customers with different requirements, and help customers make more reasonable suggestions for production line layout and production management.
l Provide technical documents and technical support for mechanical installation, maintenance, operation, etc.
l Provide machinery-related transportation information, be responsible for cargo loading and handling transportation related procedures, and always pay attention to cargo safety and logistics information.
l In terms of after-sales service, we have 5 professional after-sales service teams, all of whom have more than 10 years of manufacturing and adjusting machines. They are responsible for the installation, commissioning and after-sales service of the domestic and foreign machines we sell. They can deal with problems in time and better Guarantee the normal production of customers.
l Provide product warranty for one year (within the scope of equipment warranty, man-made damage is not guaranteed, and vulnerable parts are not guaranteed); provide paid services after the warranty period.
l Provide our limited space for short-term storage of the company’s products ordered by customers, and mail transportation on behalf of them.
l With the aim of serving customers well, we always insist on serving our customers well and helping them achieve profit as soon as possible.
Especially on the basis of the project of "short construction period and heavy workload", WINCOO developed the "container pipe spool fabrication line and workstation".
In this original mode, "Cutting/Chamfering", "Assembling", and "Automatic Welding" are integrated into a separate container for easy transportation. Through the logistics system, each container is connected scientifically to improve efficiency, and can also meet the requirements of pipeline manufacturing and improve comprehensive competitiveness!
Containerized pipe spool fabrication solution is to carry out pipe design, prefabrication management, pipe cutting, pipe groove processing, welding, logistics and anti-corrosion paint, pipe flaw detection and other work in a fixed area.
What is the significance of the emergence of the solution of container pipe spool fabrication line?
What are the advantages of the solution of container pipe spool fabrication line?
What are the characteristics of the solution of container pipe spool fabrication line?
In order to give full play to the advantages of pipeline prefabrication equipment and overcome the limitations of fixed pipeline prefabrication lines, we developed a solution of container pipe spool fabrication line, which has been widely used in companies such as PetroChina, Sinopec, and China National Chemical Corporation.
Solution of container pipe spool fabrication line consists of pipe beveling station, pipe mechanical assembly station, automatic pipe welding station, quick release steel structure station frame, trolley railing system and light rail. Transportation System. Pipe manufacturing is carried out through the field of pipe manufacturing. At present, the comprehensive performance of the solution of container pipe spool fabrication line will reach a higher level in China.
1. The detailed design adopts the most advanced "Pipeline Manufacturing Design System" software in China to realize the rapid drawing of pipeline single-line diagram and pipe section diagram. After configuring the IDF interface module, the design data of the PDS and PDMS design institutes can be directly shared, realizing the "seamless connection" between design and construction.
2. The solution of container pipe spool fabrication line adopts the domestic first-class "pipe manufacturing and installation management system" software to realize the all-around information management of the whole manufacturing process.
3. The groove adopts a reliable mobile pipe groove station, and the pipe groove adopts two methods
4. The solution of container pipe spool fabrication line adopts the tumbler type pipe plasma cutting and beveling machine, and adopts the method of thermal cutting to cut the pipe and form the groove in one step.
The solution of container pipe spool fabrication line is a key link in the realization of project objectives in the field of energy and petrochemicals. The products in the solution of container pipe spool fabrication line will be used in various spool workshops. Materials and manufacturing standards can be ASME/ASTM, PED, JIS, GB, TS, etc. STE can undertake material procurement, cutting, assembling, welding, painting, spool lining and coating, supporting fabrication and spool field installation work scope. Wincoo has third-party qualified 5G and 6G ASME/PED welders, and has long been engaged in the manufacture of high-strength steel, alloy and various stainless-steel spools.
Wincoo Engineering Co., Ltd (WINCOO) has ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour costs and higher efficiency construction/fabrication method and better quality during phase of project bidding.
The orbital welding machine uses the arc to burn between the electrode and the workpiece as a heat source to heat the electrode and the base metal. Under the action of the arc heat source, the molten electrode metal and the partially molten base metal form a molten pool, and the molten pool solidifies to form a weld.
How does an orbital welding machine work?
What is the Product parameter of orbital welding machine work?
What are the economic benefits of using an orbital welding machine?
The orbital welding machine uses the heat energy generated by the combustion of the oxygen-acetylene flame to heat the ends of the butt-welded rails to a molten state, and then applies a certain upsetting pressure to weld the rail ends. There are two existing methods: factory welding and mobile welding. Factory welding is the same as contact welding. The mobile welding method, also known as small air pressure welding, is mainly used to weld the joint joints of the long rails on the construction site. The quality of air pressure welding is also better. Aluminothermic welding. Put the prepared aluminothermic flux (made of metal aluminum, iron oxide, iron alloy and iron nail head, etc.) into a special crucible, ignite the flux with a high-temperature match, and produce a strong chemical reduction reaction to obtain high-temperature molten steel and molten steel. Slag, after the reaction is calm, inject it into the preheated sand mold tightly fastened to the ends of the two rails, melt both ends of the butt joints, remove the sand mold after cooling, and reshape the welded joint in time. Welded into one. The quality of aluminothermic welding is poor, and the fatigue strength is even worse, only reaching 45% to 70% of the base metal.
Suitable pipe: More than 130mm
Pipe wall thickness: 4-50mm
Suitable for C.S, S.S, A.S, low temperature steel (S.S is with special rail)
Suitable seam welding: Pipe to pipe, pipe to elbow, pipe to flange
Drive system: Stepping motor wheels and Gear/worm transferring
Drive system: Button to add and subtract speed
Adjustment manner: Electrical circuitry control
Oscillating system: The company's proprietary technology products, swing stepper motor
Control system: The company's proprietary technology products, the digital control.
(1) Orbital welding machine can run smoothly, safely and reliably.
(2) Orbital welding machine prolongs the service life of running vehicles and rails and reduces maintenance costs.
(3) Practice has proved that the running speed of vehicles running on seamless tracks can be increased by 20% to 40%, which can improve productivity for factories with busy vehicles and large distances, and its economic benefits are very obvious.
(4) The use of the orbital welding machine eliminates the vibration noise of the joint to a certain extent and improves the working environment. The drivers of the vehicles running on the seamless track generally report that the operation is smooth and comfortable. After testing, the driver's indoor noise has been reduced by more than 10dB, and the outdoor noise has been reduced by more than 35dB.
Orbital welding machines have been used in many fields.Wincoo Engineering Co., Ltd maintains close relationships with customers in orbital welding machine industry, and is committed to strengthening production and operation, improving quality and safety.
The installation of pipeline construction equipment is one of the necessary steps in the industrial field, and the installation and construction of pipelines is a very important stage in project construction. Next, take an example to analyze the operating requirements of pipeline construction equipment.
Here is the content list:
l Introduction of welding engineering vehicles in pipeline construction equipment.
l Introduction of pipelayer in pipeline construction equipment.
l How to maintain pipeline construction equipment after construction?
Mainly introduce the operating requirements of pipe layers, welding engineering vehicles, counter pointers and directional drills that are frequently used and risky during the construction of pipeline construction equipment
Engine part, chassis running part, transfer case and universal joint shaft, generator, hydraulic boom crane, electrical control cabinet, lubrication system and cooling system.
Driving with a license, before entering the work of pipeline construction equipment, you should fully understand the special conditions of the work site, understand the various conditions that affect operation and sports, and adopt and formulate operation and protection measures that comply with safety regulations.
1. Keep a safe distance from hanging objects, walls, falling objects and unstable ground.
2. lt is necessary to understand the changes, visibility and weather conditions of the construction area of pipeline construction equipment. No smoking!
3. Contact relevant departments in time to learn more about the locations of public pipelines, underground cables, and water pipelines.
4. When the welder is working, put the throttle to the highest position and check that the various instrument indexes are normal before it can work.
5. Keep an adequate safety distance from wires and other pipeline construction equipment.
6. Avoid any work movement that can tilt or tip the welding truck; prevent the welding truck from working or moving on a slope that does not meet the requirements.
7. When pipeline construction equipment goes downhill, low speed must be used to prevent loss of control.
8. Electricity should follow the corresponding electrical regulations.
9. Welding vehicles are not allowed to work with faults. If there is no oil pressure, or the oil pressure is too low, the water temperature is too high, or there is abnormal noise, it should be stopped immediately for inspection and troubleshooting
10. The lifting weight of the hydraulic crane must comply with the requirements specified in the chart of the rated lifting weight curve of the hydraulic crane
11. It is not allowed to adjust the opening pressure of the safety valve of the hydraulic system at will
12. Driving is not allowed for 2 consecutive hours
13. Before using power generation pipeline construction equipment, observe the hydraulic crane and the surrounding environment, whether there are debris and tools on the crawler
14. When leaving the machine, the operating lever should be locked first!
Engine, crawler walking part, hoisting system, cab, counterweight, etc.
1. Before the pipe layer runs, the passageway must be cleared to facilitate traffic.
2. When the pipe layer hoisting heavy objects, it is strictly forbidden to pass above the equipment and personnel, and it is strictly prohibited to stand under the boom.
3. Stop immediately in case of emergency during work operation.
4. The command of the ground commander shall be serious and accurate, and shall not leave the work post without authorization.
5. When hoisting pipes while driving, pay attention to the side of the boom and the side of the counterweight to prevent the counterweight from reaching out and hitting obstacles.
6. When loading and unloading heavy objects, the speed should be even and stable, and should be handled gently when approaching the ground.
7. The center of the hook should be as close as possible to the center of the heavy object. The hoisting rope must be firm and reliable with sufficient bearing capacity, and the binding must be firm. Keep heavy objects as low as possible.
8. Heavy objects are not allowed to turn before leaving the ground. It is forbidden to pull heavy objects from the ground to pull up trees and lift objects buried in the ground (except when multiple pipe layers are laying pipes).
9. When walking with heavy objects hanging, the speed of forward and backward or turning should be stable.
The maintenance of pipeline construction equipment ensures that its technical parameters within the specified life cycle meet the original design requirements; ensure that its safety performance meets the requirements of regulations and standards.
Daily maintenance work such as cleaning, inspection, lubrication, tightening and adjustment to prevent deterioration of pipeline construction equipment and maintain equipment performance; necessary inspections to determine the degree of pipeline construction equipment deterioration or performance degradation; to repair deterioration and restore pipeline Repair activities based on the performance of pipeline construction equipment. Requirements for operators of professional pipeline construction equipment: “Three Goods” and “Four Meetings” should be achieved.
Good management, good use, good maintenance, can operate, maintain, inspect, and simply repair Equipment maintenance: cross operation method. Cleaning, lubrication, tightening, adjustment, and anti-corrosion pipeline construction equipment maintenance: general requirements for "five fixed" fixed-point, fixed-point, fixed-time, fixed-quality, and quantitative maintenance
① Strictly follow the procedures, cycles and methods specified in the pipeline construction equipment manual.
② Different functional blocks have different requirements: power system, transmission system, electrical system, hydraulic system, lubrication system, etc.